• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.17-17
• /
• 1998

Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

• 한국식품과학회지
• /
• 제42권1호
• /
• pp.14-20
• /
• 2010

금강밀과 Dark Northern Spring(DNS)밀의 제분 중 발생하는 기울과 배아로부터 추출한 기름(WBG oil)을 $5^{\circ}C$, 1700 Lux로 12일 동안 광산화시킬때 토코페롤, 카로티노이드, 인지질 함량 변화를 측정하고 이들과 WBG oil의 광산화 관련성을 평가하였다. 토코페롤, 카로티노이드, 인지질은 WBG oil의 광산화 중 분해되었으며 DNS밀 WBG oil이 금강밀 WBG oil에서보다 토코페롤의 분해가 빨랐으나, 카로티노이드와 인지질 분해 속도는 느렸다. WBG oil의 광산화 정도와 산화방지성분의 상관관계는 매우 높았으며 인지질이 WBG oil의 광산화에 가장 큰 영향을 나타내었다. 금강밀 WBG oil에 비해 리놀레산 함량이 낮고 올레산 함량이 높았던 DNS밀 WBG oil은 지방산 조성은 물론 인지질의 높은 함량과 낮은 분해 속도에 기인하여 높은 광산화안정성을 나타내었다. 본 결과는 빛의 존재하에서 DNS밀 WBG oil보다는 금강밀 WBG oil이 토코페롤 source로 사용될 수 있는 가능성을 보여주었다.

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.902-908
• /
• 1995

배소김과 조미김의 저장중 지방질 산화의 변질요인을 조사하기 위하여 몇가지 광원, $a_w$, 포장 및 온도의 영향을 시험하였다. 배소김의 주요 지방산 조성은 16 : 0(14.9%) 및 20 : 5(46.4%) 이었다. 배소김과 조미김의 지방질 산화는 형광등 하에서 가장 심하였고 다음이 백열등, 암소저장 순 이었으며, 또한 지방질의 산화는 $a_w$가 증가할수록, 저장온도가 높을수록 급격히 증가하는 경향을 보였고 기체 및 광 차단 효과가 큰 포장지에 포장한 시료일수록 산화가 억제 되었다. 배소김과 조미김의 지방질 산화를 kinetics 측면에서 고찰한 결과 조미김의 지방질 산화가 배소김 보다 약 3배 빨랐으나 chlorophyll 감소량은 배소김이 조미김 보다 약간 많았다.

• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.232-239
• /
• 2017

Objectives: The evaluation of iatrogenic dentinal defects in extracted teeth may be influenced by extraction forces and prolonged dry times. The purpose of this study was to compare the presence of dentinal defects in freshly extracted, periodontally compromised teeth with those in a group of teeth with uncontrolled extraction forces and storage time. Materials and Methods: The experimental group consisted of eighteen roots obtained from teeth extracted due to periodontal reasons with class II or III mobility. They were kept in saline and sectioned within 1 hour following extraction. The control group consisted of matched root types obtained from an anonymous tooth collection, consistent with previous dentinal defect studies. The slices were obtained at 3, 6, and 9 mm from the apex. The imaging process exposed all specimens to no more than 60 seconds of dry time. The ${\times}12.8$ magnification was used for the 9 mm slices and ${\times}19.2$ magnification for the 3 mm and 6 mm slices under light-emitting diode (LED) transillumination. The root canal spaces and periodontal tissues were masked to minimize extraneous factors that might influence the evaluators. Chi-square test was used for statistical analysis. Results: Dentinal defects were detected in 17% of the experimental group teeth, compared to 61% of control teeth (p = 0.015). Conclusions: LED transillumination assessment of freshly extracted roots with class II or III mobility showed smaller number of dentinal defects than roots with uncontrolled storage time and extraction forces. The use of freshly extracted roots with mobility should be considered for future dental defect assessment studies.

• Applied Biological Chemistry
• /
• 제44권2호
• /
• pp.73-80
• /
• 2001

저장 중 온도$(20,\;60^{\circ}C)$), pH(4.5, 7.0), 기체조성$(N_2,\;0_2)$, 광도(0 lux, 5,000 lux), 항산화제 및 포장조건이 시금치 및 동결 건조 시금치의 클로로필 색소 성분에 주는 영향을 조사하였다. 시금치에 함유된 클로로필 a 및 클로로필 b 함량은 각각 710.54(mg/100g dry weight) 및 280.15(mg/100g dry weigllt)이었다. 저장온도를 $20^{\circ}C$에서 $60^{\circ}C$로 올리면 다른 조건에 관계없이 시금치의 클로로필 a 및 클로로필 b함량은 유의적으로(P<0.05) 감소하였으며, pH를 7.0에서 4.5도 낮추면 시금치의 클로로필 a, b 함량도 모두 유의성(P<0.05) 있게 감소하였다. 시금치의 클로로필 분해는 높은 온도와 낮은 pH에서 잘 일어났다. 질소로 치환된 저장 조건에서 저장된 시금치의 클로로필 a 및 클로로필 b 색소 성분의 분해는 질소 처리를 하지 않은 조건에서 저장된 시금치와 비교해서 유의성(P<0.05) 있게 억제되었으며, 빛(5,000 lux)을 조사한 조건에서 저장한 시금치의 클로로필 a 및 클로로필 b 성분은 빛이 차단된 상태에서 저장된 시금치와 비교해서 유의적으로(P<0.05) 감소하였다. 저장 중 시금치의 클로로필 파괴는 산소와 빛이 있는 조건에서 잘 일어난다. 암 저장$(25^{\circ}C,\;15\;min)$ 조건에서 항산화제는 시금치의 자동산화에 의한 지용성 클로로필 a 성분의 분해를 억제하였는데, 억제 효과는 알파-토코페롤>ascorbic acid>${\beta}-carotene$>catechin>quercetin>rutin>kaempherol>caffeic acid>chlorogenic acid>p-coumaric acid>ferulic acid 순이었다. 항산화제는 빛 저장(5,000 lux, 6 min)조건에서도 singlet oxygen oxidation에 의한 클로로필 a의 분해를 억제하였는데, 억제 효과는 ${\beta}-carotene$>알파-토코페롤>ascorbic acid>catechin>quercetin>rutin>kaem-pherol>caffeic acid>chlorogenic acid>p-coumaric acid>ferulic acid의 순으로 감소하였다. Polyethylene bag으로 포장하지 않은 동결건조 시금치에 잔존하는 클로로필 a 및 클로로필 b 함량은 polyethylene bag으로 포장한 조건에서 동결건조 시금치에 잔존하는 클로로필 a 및 클로로필 bb함량에 비해 유의적으로(P<0.05) 낮게 나타났다. 시금치는 항산화제를 첨가한 다음 polyethylene bag에 포장한 상태로 저장하는 것이 클로로필 성분의 파괴를 최소화하는 방법이 될 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제29권1호
• /
• pp.58-67
• /
• 2004

The objectives of this study was to evaluate current visible light curing units regarding microhardness and microleakage. Fourty samples of composite resin(Z-250, 3M) were cured by different light curing units (Flipo, LOKKI; Credi II, 3M; XL 3000, 3M: Optilux 500, Demetron) in acrylic blocks. Microhardness was measured using a calibrated Vickers indenter on both top and bottom surfaces after 24 hours of storage in air at room temperature. Class V cavities were prepared on buccal and lingual surfaces of fourty extracted human molars. Each margin was on enamel and dentin/cementum. Composite resin(Z-250, 3M) was filled in cavities and cured by four different light curing units (Flipo, LOKKl; Credi II, 3M; XL 3000, 3M: Optilux 500, Demetron). The results of this syudy were as follows: Microhardness 1. Flipo showed low microhardness compared to Optilux 500, Credi II significantly in upper surface. Flipo didn't show a significant difference compared to XL 3000. 2. The microhardness resulting from curing with Flipo was lower than that of others on lower surfaces. Microleakage 1. Dentin margin showed significantly high dye penetration rate than enamel margin in all groups(p<0.05). 2. No significant differences were found on both enamel and dentin margin regarding curing units.

• 한국정보과학회논문지:시스템및이론
• /
• 제28권10호
• /
• pp.491-498
• /
• 2001

컴퓨터 그래픽스 분야에서 물체나 장면을 실제 사진처럼 표현할 목적으로 표변 반사 특성에 고나한 많은 연구가 이루어져왔다. 본 논문은 물체의 표면 반산 특성을 구하기 위한 특별한 장비나 복잡한 기하학적인 정보를 필요로 하지 않는 광원 모델링 기법을 제시한다. 이 기법은 영상의 픽셀 밝기정보가 아닌. 카메라로 들어오는 실제 밝기를 나타내는 라디안스 정보를 이용하여 물체 표면의 반사 특성(BRDF)를 측정하는것이 특징이다. 본 논문에서 제안한 광원 모델링을 통하여 다양한 광원에서의 사실적인 장면을 복원할 수 있을 뿐만 아니라 다양한 광원의 조작과 카메라 센서의 노출시간을 자류롭게 조절하는것이 가능하다.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.193-202
• /
• 1990

The purpose of this study was to compare the fithness, hardness and bending strength of the conventional reliners and visible light curing reliner. Nine regions were selected in the upper transverse section which were thought to be of interest from a clinical standpoint and the discrepancies between the dentures and the master cast in these regions were determined by the coordinated measuring machine(UMM-500, Zeiss, W. Germany). The results were as follows ; 1. The experimental denture bases showed the lowest fittness at the central portion of the posterior palatal border and the intimate contact in the buccal flanges regardless of relining materials and relining methods. 2. The fittness of relined denture base was the best in autopolymerizing group and in the order of long processing, short processing and visible light curing group. 3. The fittness after 24 hour-storage in water was improved in long processing and autopolymerizing groups, but there was no significant difference. 4. The hardness was the highest in long processing group and decreased in the order of short processing, visible light curing and autopolymerizing group. 5. The bending strength was the highest in long processing group and decreased short processing, visible light curing, and aotopolymerzing group in order.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2197-2210
• /
• 2016

Recently, the trend of zero emissions has increased in automotive engineering because of environmental problems and regulations. Therefore, the development of battery electric vehicles (EVs), hybrid/plug-in hybrid electric vehicles (HEVs/PHEVs), and fuel cell electric vehicles (FCEVs) has been mainstreamed. In particular, for light-duty electric vehicles, improvement in electric motor performance is directly linked to driving range and driving performance. In this paper, using an improved design for the interior permanent magnet synchronous motor (IPMSM), the EV driving range for the light-duty EV was extended. In the electromagnetic design process, a 2D finite element method (FEM) was used. Furthermore, to consider mechanical stress, ANSYS Workbench was adopted. To conduct a vehicle simulation, the vehicle was modeled to include an electric motor model, energy storage model, and regenerative braking. From these results, using the advanced vehicle simulator (ADVISOR) based on MATLAB Simulink, a vehicle simulation was performed, and the effects of the improved design were described.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.583-591
• /
• 2007

This paper reports the performance of a 150W PV-wave hybrid system with battery storage in buoy. This system was originally designed to meet a new hybrid ower system for buoy in Korea. In the case or lighted buoys and lighthouses, a light failure alarm system of wireless radio is attached so that light failures are immediately notified to the office. At lighthouse offshore fixed lights and light buoys where commercial electricity is not available, the power source depends on solar system and batteries. This power system has a various problems. Therefore energy derived from the sunshine, wind and waves has been used as the energy source lot aids to navigation. Recently a hybrid system of combining the solar, wind and the wave generator is a favorable system lot the ocean facilities like lighthouse and buoy. The hybrid system in this paper is intended for variable DC load like light, communication system in the buoy and includes a PV-wane generation system and battery. This is composed a high efficiency charging algorithm, switching converter and controller. This paper includes discussion on system reliability, power quality, and effects of hybrid system in the buoy. Simulation and experimental results show excellent performance.