• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.3
• /
• pp.351-359
• /
• 2010

Bi-fuel system in a spark ignition engine (SIE) is a rising phenomena in today's automobile technology. In a gasoline driven vehicle, alternatively adoption of compressed natural gas (CNG) could be used as a potential substitute to meet the energy requirement and this is possible by some minor changes in the hardware of the existing engine. Gasoline engine is widely used in the passenger cars, light, medium and heavy duty vehicles but the consumption status of the petroleum is decreasing worldwide and at the same time environmental pollution from automobiles is seriously establishes as a threat for every nation in respect to global warming and climate changes. Now-a-days most vehicles operate using CNG for its popularity stems, clean burning properties and cost effective solution compared to other alternative fuels. It refers as a good gaseous fuel because of its high octane number and self ignition temperature. Though the power output is slightly lesser than the gasoline fuel; its thermal efficiency is better than the gasoline for the same SIE. The research paper highlights the reduction of CO, reasonable outcomes of HC emissions with minor increase in $NO_x$ emissions compared with the gasoline fuel to bi-fuel mode in the SIE that meets the emission challenges.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.233-240
• /
• 2019

Dyeing is an essential process for improving the value of textile products, but it is considered as one of industries causing pollution because of producing wastewater containing hazardous chemicals as well as using a large amount of water and energy. Global demand for greener technologies in textile field is getting much more attention and accordingly, the use of eco-friendly natural dyes is growing much larger. In textile printing, both dyes and pigments can be used. Pigment printing is more simple process and requires less water and less energy, compared to dye printing. In this study, the organic pigment was prepared from the marigold colorant. Samples were stencil printed, pressed(70℃, 3min) and then heat treated(150℃, 5min). The uptake of polyacrylic acid as a chemical binder was the lowest. In particular, marigold pigments were excellent in color and texture when Guar Gum and Sodium Alginate were used as binders. In addition, the light and washing fastness was rated very high as 4, 4/5 grades, and the rubbing fastness was also excellent as 3 and 4 grades.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.313-319
• /
• 2001

The development of ozone SRP (Standard Reference Photometer) designated as a G-7 project by the Korean Ministry of Environment began 1997 and is now nearly completed. With the completion of the ozone SRP we will not only acquire a qualification to participate in the international ozone calibration system but also enhance calibration credibility of ozone similarly to that of other ambient air pollution monitors. As the ozone SRP uses highly cleaned blank air that can be distinguished from general ozone analyzer, it is possible to reduce errors associated with the determination of ozone via elongation of the absorption length as long as 1 meter In addition, gas chopping method hat been adopted to cut down interference of other substances and time drift. Furthermore, the system has also been modified to minimize the strayed ultra-violet noise along the light path. In this paper, a new method for uncertainty evaluation has been introduced, which is guided by the ISO (International Standard Organization) GUM (Guide to the Expression of Uncertainty in Measurement) through assessments of the uncertainty type B (that was impossible to estimate before) as well as the uncertainty type A (based on statistics).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.2
• /
• pp.244-250
• /
• 2020

Microplastic pollution in the marine ecosystem has been emerged as a global issue. In this study, we investigated the abundance of microplastics from clam Meretrix lusoria, blood arkshell Scapharca broughtonii, and warty sea squirt Styela clava obtained from a local market in Busan, Korea. The marine organisms were digested in 10% KOH, and were incubated at 40℃ and 150 rpm, for 7 days. The digest was filtered through standard sieve (5 mm, 1 mm, 300 ㎛, and 100 ㎛), and mciroplastics were identified using a light microscope and microFT-IR. The abundance of microplastics of clam, blood arkshell, warty sea squirt was 0.08 items/g, 0.05 items/g, and 0.12 items/g, respectively. The predominant microplastic size was in the range of 100-300 ㎛, occupying 48%, and the predominant type was fiber. The composition of microplastics was mostly rayon, semi-synthetic cellulosic material and polyester, which are main component of fabric and textile. We strongly believe that this preliminary work may provide useful information for the establishment of the standardized analysis method of microplastics ingested by marine organisms.

• 보존과학연구
• /
• s.29
• /
• pp.199-220
• /
• 2008

Hobun(Oyster shell White) is a traditional material used as extender and white pigment from ancient times. The production method of it, however, has been discontinued. We have studied the traditional production method of Hobun by weathering oyster shell, which is one of the traditional ways for preparing Hobun. Reproduction study of manufacturing method of the discontinued traditional material is an important accomplishment of our research. Also this study provides solid background knowledge to stabilize the production and supply of Hobun for the cultural asset repairing materials. The result can be summarized as follows: The production process of Hobun by weathering method takes 5 steps - (1) weathering shells ${\rightarrow}$ (2) washing ${\rightarrow}$ (3) pulverization ${\rightarrow}$ (4) separating fine powder by submerging in water ${\rightarrow}$ (5) drying. The major aim in step (1) is to eliminate organic impurities. In the step (4), the fine particles smaller than $25{\mu}m$ are separated by extracting the supernatant from stirred suspension after heavy particles are submerged. Also, the soluble inorganic impurities can be eliminated through the powder submerge in 15 times water and stirring the suspension 6 hours and changing the water 3~4 times. The final products have high quality with 94.03, 0.52, 2.05 for L, a, b, less than $25{\mu}m$ particle size, fine resistance for discoloration by light and environmental pollution and good workability.

• Plant Resources
• /
• v.5 no.2
• /
• pp.161-164
• /
• 2002

This study was performed to investigate the effect of Artemisiae argyi Herba extract on the treatment of chromaticity and colorfastness. Artemisiae argyi Herba has been used as a Korean medicine. It is effective in removing skin disorders and suppressing pain. It is also good as a fungicide and in treating pruritis. In the long history of Korea, dyeing has been applied for a means representing the grace of natural and inner esthetic consciousness of man. Vegetable dyes give us such great benefits, diversified color; but no pollution. And ramie fabric has distinctive features such as beautiful brilliance, elegance, and strong durability. So, it is regarded as a special product of Korea traditionally. These studies were carried out to treat with acetate iron, dichloride copper and alum with a mordant to ramie fabric. The ramie fabric was died with Artemisiae argyi Herba extract. The results of experiment showed as follows: First, the chromophoric degree was the highest in acetate iron but not distinction in another mordants. Seocond, the light colorfastness was the highest in non treated and dichloride copper, but alum was the lowest. Third, the discoloration was alum and dichloride copper showed first grade in washing colorfastness. Abrasion colorfastness was not significant in this test. According the previous results, Artemisiae argyi Herba has an efficiency in removing skin disorders and suppressing pain. So it is considered that Artemisiae argyi Herba can be applied effectively to theraphy of fungicide and in treating pruritis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1121-1124
• /
• 2004

Aging test to estimate life property of polymer insulator is executed through several international standard such as IEC 61109 and CEA tracking wheel test, but is not getting clear conclusion yet. There are two methods in the diagnosis method of polymer insulator such as off-line and on-line. The diagnosis methods in off-line are external condition analysis by the eye, contaminant analysis on surface, surface analysis, pollution withstand voltage test, power frequency flashover voltage test, lightning impulse flashover test, tensile fracture load test and flexural load test. The diagnosis methods in off-line most are the method for virgin and last aged sample. However, the diagnosis method in on-line is method that can be evaluate sample state as progressing continuously aging test in beginning, The diagnosis method in on-line is arranged as following: leakage current measurement, electric field, surface state investigation, thermal image, emitting light measurement and then so. In this paper, the tracking performance of polymer insulator with salt solution which is added surface active agent. The diagnosis of insulator sample has been analyzed by leakage current and visual examination.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.719-725
• /
• 1996

To research the cause of the low and the poor visibility phenomena of Kimhae international airpot statistically, we analyzed the field routine data for the last five years from 1985 to 1989. The poor visibilities below 1km, 3km, and 5km usually occurred at about 6 o'clock in the morning under the condition of calm or light wind from south to southwest direction, and lasted for from 1 to 3 hours. they were caused by the radiative cooling and the inflow of moisture from the South Sea. The frequency of th low visibility(below 9km) recorded 48.1% a year. And the low visibility below 8km with relative humidity below 70% often occurred in the case of southeast, southwest, and northwest wind. And it reveals a peak at 11:00 a.m.. It is supposed to be caused by the pollutants flowing from the neighbouring industrila complex, Sasang, Jangnim and by the photochemical reaction. And, when the industrial direction from Kimhae international airport, the visibility and the air pollution may become worse and worse by the increased pollutants.

• Plant Resources
• /
• v.5 no.3
• /
• pp.202-205
• /
• 2002

This study was performed to investigate the effect of Perilla frutescens Herba extract on the treatment of chromaticity and colorfastness. Perilla frutescens Herba has been used as a Korean medicine. It is effective in removing dangerous for an unborn child and suppressing pain. It is also good as a detoxification and in treating cold. In the long history of Korea, dyeing has been applied for a means representing the grace of natural and inner esthetic consciousness of man. Vegetable dyes give us such great benefits, diversified color, but no pollution. And ramie fabric has distinctive features such as beautiful brilliance, elegance, and strong durability. So, it is regarded as a special product of Korea traditionally. These studies were carried out to treat with acetate iron, dichloride copper and alum with a mordant to ramie fabric. The ramie fabric was died with Perilla frutescens Herba extract. The results of experiment showed as follows: First, the chromophoric degree was the highest in acetate iron but not distinction in another mordants. Second, the light colorfastness was the highest in non treated and dichloride copper, but alum was the lowest. Third, the discoloration was alum and dichloride copper showed first grade in washing colorfastness. Abrasion colorfastness was not significant in this test. According the previous results, Perilla frutescens Herba has an efficiency in removing skin disorders and suppressing pain. So it considered that Perilla frutescens Herba can be applied effectively to theraphy of detoxification and in treating cold.

• Plant Resources
• /
• v.5 no.3
• /
• pp.210-213
• /
• 2002

This study was performed to investigate the effect of Epimedium brevicornum Herba extract on the treatment of chromaticity and colorfastness. Epimedium brevicornum Herba has been used as a Korean medicine. It is effective in sexual excitement, depressant of blood pressure and anti-virus. It is also good as a tonic and in treating involuntary emission of semen. In the long history of Korea, dyeing has been applied for a means representing the grace of natural and inner esthetic consciousness of man. Vegetable dyes give us such great benefits, diversified color, but no pollution. And ramie fabric has distinctive features such as beautiful brilliance, elegance, and strong durability. So, it is regarded as a special product of Korea traditionally. These studies were carried out to treat with acetate iron, dichloride copper and alum with a mordant to ramie fabric. The ramie fabric was died with Epimedium brevicornum Herba extract. The results of experiment showed as follows: First, the chromophoric degree was the highest in acetate iron but not distinction in another mordants. Second, the light colorfastness was the highest in non treated and dichloride copper, but alum was the lowest. Third, the discoloration was alum and dichloride copper showed first grade in washing colorfastness. Abrasion colorfastness was not significant in this test. According the previous results, Epimedium brevicornum Herba has an efficiency in sexual excitement, depressant of blood pressure and anti-virus. So it is considered that Epimedium brevicornum Herba can be applied effectively to tonic and in treating involuntary emission of semen.