• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.136-142
• /
• 2011

Al alloys have been used widely for commercial and military ships in most ocean countries since mid-1950s, and the value as light metal with high mechanical strength has been proven. As the safety and fuel efficiency of Al ships have improved, she can carry more freight, sail faster and travel longer distances. Furthermore, in the shipbuilding industry, Al alloys are applied as structural materials for ships to various areas including the deck of luxurious cruises, battleships and leisure ships. In addition, Al alloys are being spotlighted as environmental-friendly material as they can be recycled even after end of lifespan. However, Al alloys for ships must be carefully selected after considering corrosion resistance, endurance, strength, and weldability in sea water environment. Al alloys to satisfy these conditions are used widely include 5000 series Al-Mg alloy and 6000 series Al-Mg-Si alloy. Thus, this study selected and evaluated the cavitation characteristics of the 5000 series Al alloys that are used in hulls that directly contact seawater and the 6000 Al alloys that are used in the upper structures of ships. Results of cavitation test with time, weightloss and cavitation rate of 5456-H116 showed the smallest damage among 5052-O, 5456-H116 and 6061-T6.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.6
• /
• pp.1297-1306
• /
• 1998

Carotenoids are yellow to orange red pigments that are ubiquitous in the nature and its annual pro duction amounts to one hundred million ton. This review discussed physicochemical properties, antiox idative activity, anticancer activity of carotenoids and its production technology. Carotenoids, mainly used as food colourants, are characterized by its strong reactive conjugated double bonds, related to oxidation by heat, light, acid, and metal ions. The provitamin A activity of carotenoids is higher in trans form than in cis form. Antioxidative properties of carotenoids are related to ionone structure and long, conjugated polyene chain number. In particular, carotene, astaxanthin, canthaxanthin, and lycopene possess strong antioxidant activity, compared with tocopherol. Especially, carotene, astaxanthin, carotene, fucoxanthin, halocynthiaxanthin and peridinin impart strong anticancer activity against lung cancer, breast cancer, buccal pouch cancer and nerve cell cancer. Carotene and astaxanthin are produced by biotechnology using algae such as Dunaliella salina and Haematococcus pluvalis. But the change of cultivation conditions and screening of algae, efficiently producing carotenoids, are needed for its commercial production. Carotenoids are expected to be used in the various fields through explanation of its biological activity and establishment of commercial production technology.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.1
• /
• pp.141-152
• /
• 1994

Our experiment investigated the degree of soil contaimination caused by oil leakage. Each soil sample was taken by boring 5, 8m below the test areas, located 5 to 30m from storage tanks at oil stations. According to the results from a series of laboratory tests(both soxhiet extract test and gas chromatograph test), Traces of a light oil were found in all samples except in Dj8, rocky soil and gasoline and petroleum were not detected. We concluded that soil contamination was caused by the corrosion of storage tanks or alternatively by oil overflow caused during the flooding of underground water seeping into the tank during heavy rain fall or the spillage caused by carelessness during lubrication. Old stations without a concrete box enclosing their metal tanks run a greater risk of oil leakage. To research the effect of oil leakage on plant growth and underground water, We examined the results of research conducted overseas. According to these results, when oil leakage occurs, plant growth is repressed and agricultural crops experience low productivity levels. Also, the contamination of underground water can be serious when oil spreads to the aquifer layer. As a result of these problems, to prevent oil leakage and minimize its contaminating effects at oil stations, it is necessary to improve facilities of storage tanks and have the monitoring system of oil leakage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.125-129
• /
• 1994

The acetone extracted pigment from the cell mass of Rhodophila globiformis DSM 161 was generally red. In a pH 5-6 condition, the color of pigment was red, while in p/h 7-9 condition it was yellowish red. The pigment was stable at pH range between 6.0-11.0 and below 4$0^{\circ}C$. In the presence of light and oxygen , the pigment was rapidly degraded and became unstable in the presence of metal ions such as Fe3++(1.0$\times$ 10-2M, 1.0$\times$10-3 M), Al3+ (1.0$\times$10-2 M, 1.0$\times$10-3 M) and Zn2+(1.0$\times$10-2 M). But in the presence of Zn2+ (1.0$\times$10-2M). But in the presence of Zn2+ (1.0$\times$10-3 M) it was very stable. Through visible absorption scanning ,it showed five sharp absorption peaks at 358 , 385, 494, 680 ad 748 nm with three shoulder peaks at 410, 466 and 522nm. On the results of TLC analysis , it was shown to be composed of seven color fractions.

• Journal of Korea Foundry Society
• /
• v.35 no.1
• /
• pp.8-14
• /
• 2015

Variations of nickel contents and microstructures in molten magnesium alloys on the addition of aluminum, zirconium, and manganese have been investigated. Specimens were prepared by melting under $SF_6$ and $CO_2$ atmosphere and casting into a disc of 29 mm diameter with 7~10 mm thickness from the melt acquired at the top of crucible. Before casting, the molten metal was stirred for 3 minutes after each addition of alloying elements and maintained for 30 minutes for settling down. Results showed that zirconium did not significantly affect the content of nickel while aluminum remarkably reduced it by forming $Al_3Ni_2$ phase. When manganese are added to Mg-1wt%Ni alloy along with aluminum, both elements remarkably reduced the content of nickel. The addition of 1.5 wt% manganese to Mg-1wt%Ni alloy containing aluminum further reduced the content of nickel by more than 30%, during which an additional intermetallic phase $Al_{10}Mn_3Ni$ was precipitated in the molten magnesium.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.3 s.52
• /
• pp.52-56
• /
• 2003

This study investigates the photoelectrochemical behavior of STS304 steel with TiO2 thin films coating, applied by sol-gel mehod, for the purpose of cathodic photoprotection of the steel corrosion. One time TiO2-coated STS304 steel, adapted with two kinds of TiO2 sol solution, has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40 W fluorescent lamp, respectively. That had yielded more negative values than the corrosion potential of the bare metal(-130mv vs.SCE). The bleaching of TCE was confirmed on TiO2-coated STS304 steel under UV-illumination with 20W Black-light. This Study concluded that Ti02-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and a photocatalytic self-cleaning effect.

• Journal of the Korean Ceramic Society
• /
• v.54 no.5
• /
• pp.349-365
• /
• 2017

Graphene has attracted a lot of attentions due to the unique electrical and optical properties. Compared with the noble metal plasmons in the visible and near-infrared frequencies, graphene can support surface plasmons in the lower frequencies of terahertz and mid-infrared and it demonstrates an extremely large confinement at the surface because of the particular electronic band structures. Especially, the surface conductivity of graphene can be tuned by either chemical doping or electrostatic gating. These features make graphene a promising candidate for plasmonics, biosensing and transformation optics. Furthermore, the combination of graphene and metasurfaces presents a powerful tunability for exotic electromagnetic properties, where the metasurfaces with the highly-localized fields offer a platform to enhance the interaction between the incident light and graphene and facilitate a deep modulation. In this paper, we provide an overview of the key properties of graphene, such as the surface conductivity, the propagating surface plasmon polaritons, and the localized surface plasmons, and the hybrid graphene/metasurfaces, either metallic and dielectric metasurfaces, from terahertz to near-infrared frequencies. Finally, there is a discussion for the current challenges and future goals.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.1-7
• /
• 2007

In this paper, It evaluated visibility about Metal Halide Lamp(MHL), High Pressure Sodium Lamp(HPS) and PLS(Plasma Lighting System) as Road lighting source in fog conditions. To evaluate visibility, it analyzed valuation of subjects about each light sources in special fog conditions. In result, it obtained that High Pressure Sodium Lamp has best visibility in photopic vision and PLS has best visibility in scotopic vision. This result is expected to help about select of Road lighting source.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.513-519
• /
• 2010

Marine bacterium producing pigment was isolated from the solar saltern of Mijo-myeon, Namhae, Korea. Based on phenotypic characteristics and 16S rRNA sequence analysis, the strain was identified as Kocuria sp., which produced a yellow pigment. The pigment showed UV absorption maximum at 469nm. The bacterial strain grew well on Marine broth 2216 culture medium. Productivity of the pigment reached the maximum value after 44 hours at $30^{\circ}C$, 2% NaCl and pH 6.0. The pigment was produced best when supplied by 1% lactose as a carbon source and 1% beef extract as a nitrogen source. The result of the color stability study showed that pigment extracted from the strain by ethanol was stable at $-20-25^{\circ}C$ and also showed higher stability over 70% for 14 days in light conditions at $25^{\circ}C$. The pigment extract was also stable for all metal ions tested, except for $FeCl_2$.