• 제목/요약/키워드: Light Control

검색결과 4,388건 처리시간 0.036초

대기오염과 이비인후과 (Air Pollution and Its Effects on E.N.T. Field)

  • 박인용
    • 대한기관식도과학회:학술대회논문집
    • /
    • 대한기관식도과학회 1972년도 춘계종합 학술대회 초록집
    • /
    • pp.6-7
    • /
    • 1972
  • 최근 10년간 우리나라 경제의 급격한 발전으로 이에 부수적으로 일어나는 대기오염은 생활환경을 파괴하는 오염형태의 하나로서 직접 또는 간접으로 인체에 미치는 피해는 격심하여가고 있으며 이것이 심각한 사회문제로 대두되었다. 대기오염이 인체에 미치는 영향에 관하여 병리나 임상적으로는 많은 연구보고가 있으나 호흡기로의 기시부인 비강이나 인의 영향에 관한 연구보고는 많지 않은 실정인 차제에 대기오염과 비, 인후질환자의 관계를 추구하여 그 대책을 논하는 것은 의의 있는 일이라 하겠다. 이러한 연구의 일환으로서 연세의대 공해연구소의 대기오염도조사에서 가장 심한 곳으로 확인된 부산시 우암동 지역에 위치한 S 공업고등학교 학생 469명은 조사군으로 하고 대기오염도가 낮은 K고등학교 학생 345명을 대조군으로 하여 내과, 안과, 비, 인후과적 검사를 실시하여 얻은 성적과 그 외의 문제점들을 검토하고자 한다. I. 위해오염물질 대기오염물질은 자극성가스와 질식성가스로 구분되며 이비인후과 질환과 밀접한 관계가 있는 것은 자극성 가스이며 여기에는 질소산화물, 유황산화물, 탄화수소와 그리고 광합성작용에 의하여 2차적으로 발생하는 강력한 자극성물질인 PAN(Peroxy acyl nitrate) 등을 열거할 수 있으며 이들 가스는 산화성이 강하기 때문에 점막이 부착되어 괴양 및 2차감염을 일으켜 인체에 피해를 준다. 이리한 오염물질은 고체연료(특히 석탄)나 액체연료의 불완전 연소때와 각종 차량의 배기가스로서 배출된다. 대표적인 오염물질인 일산화탄소, 질소산화물 및 유황산화물의 조사지역과 대조지역의 오염도는 다음과 같다. II. 인체에 미치는 피해 1. 일반적인 피해 대기오염이 인체에 미치는 영향은 오염물질의 물리적 화학적 성상 및 오염물질의 농도, 양, 그리고 폭로기간 등에 따라 다르다. 각 오염물질별 건강피해를 보면 (1) $아황산가스(SO_2)$ 아황산가스는 오염물질 중 가장 대표적인 독성을 가지고 있으며 용해도가 높아서 기도에 용이하게 흡수되어 처음에는 자극증상이 오고 나중에는 기도 저항을 일으켜 폐부종, 호흡중추의 마비를 일으킨다. 만성 폭로 시에는 비염, 인루염, 후각 및 미각장해를 일으킨다. (2) 일산화탄소(CO) CO는 혈색소의 산소운반 능력을 박탈하기 때물에 중독증상을 일으킨다. 즉 CO 중독은 농도와 흡입시간에 따라 차이가 있으나 우선 두통, 현기, 오심, 구토, 이명이 오고 호흡곤란, 허탈상태, 근육이완, 졸도등을 수반하고 혼수상태에서 사망한다. (3) 질소산화물 여러 질소산화물중 배기가스에서는 $NO_2로$ 배출되며 또한 탄화수소와 태양광선이 대기중에서 작용하여 $NO_2를$ 생산하며 $NO_2는$ 변성 Hemoglobin 을 생성하여 호흡기 장해를 일으킨다. $NO_2의$ 급성 중독증상으로서는 눈, 코를 강하게 자극하고 폐충혈, 폐수종, 기관지염, 폐염 등을 일으킨다. 만성 중독시에는 만성폐섬유와 및 폐수종을 일으킨다. (4) $오존(O_3)$ Ozone은 자동차 배기가스에서 나오는 $NO_2$ gas 및 탄화수소와 작용하여, PAN이라는 자극성 물질을 생성시키는 광학적 Smog의 주요소로 알려져 있다. 자극적인 냄새가 있음으로 불쾌감을 주고 비, 인후점막의 전조감과 두통이 오며 폐기능을 저하시키며 더욱 진행되면 폐충혈, 폐수종 등을 일으킨다 (5) Smog에 의한 건강피해 대표적인 것이 1952.12.5~12.8까지 4일간 영국 Lon-don에서 계속된 Smog사건이며, 이 사건으로 말미암아 호흡기질환 사망율이 사건전보다 사건기간 중 혹은 사건후에 5~10배의 증가율을 보였다. 이때 Smog의 주원인은 연료의 불완전 연소에 의한 연기와 이때 발생하는 아황산가스가 주원인이며 dust가 2차적 원인이라고 생각하였다. 새로운 종류의 공해로서 광학적 Smog에 의한 피해가 1970. 7. 18 Tokyo의 한 고등학교에서 발생한 바 운동장에서 운동 중이던 여학생 43명이 눈에 대한 자극증상, 인후동통, 기침을 호소하고 그중에는 호흡곤란으로 의식불명에 빠진 학생도 있었다. 이러한 현상은 대기중에 배출된 탄화수소와 oxidant가 대기중의 광 energy와 결합하여 발생한 것이라 하였다. 2) 비, 인후과 질환 대조군 345명과 조사군 469명중 호흡기계, 안과 및 비, 인두의 자각증상의 유소견자는 각각 39명(11.3%)와 106명(22.6%)로서 조사군이 대조군 보다 약 2배 많았다. 조사군의 유소견자중 호흡기증상 29명(29%), 안증상 22명(21%), 비폐쇠 및 비후 50명(47%), 인후통 5명(5%)으로서 비, 인두 자각증상의 유소견자가 55명(52%)으로서 과반수를 차지하고 있었다. 임상검사에 의한 타각증상의 유소견자는 대조군 99명 (28.8), 조사군 180(384%)으로서 조사군이 대조군 보다 10%정도 많았다. 조사군의 유소견자중 호흡기질환 1명(0.6%), 안질환 8명(4.4%), 비염 97명(54%), 인두편도염 74명(41%)으로서 비, 인두질환이 171명이었다. 이상의 성적에서 오염지구의 자, 타각증상의 유소견자중 비, 인두질환이 압도적으로 많은 것으로 보아 대기오염과 이비인후과 질환과는 밀접한 관계가 있으며 앞으로 그 대책이 시급히 요구된다고 하겠다.

  • PDF

선진국(先進國)에 있어서의 임목육종연구(林木育種硏究)의 동향(動向) (The Trend and Achievements of Forest Genetics Research in Abroad)

  • 현신규
    • 한국산림과학회지
    • /
    • 제14권1호
    • /
    • pp.1-20
    • /
    • 1972
  • 해외(海外) 선진국(先進國)에서의 임목육종(林木育種)의 실정(實情)과 기(其) 동향(動向)을 견개(見開)하고 금후(今後) 우리나라 임목육종(林木育種)의 취진(就進)에 있어서 반드시 고려(考慮) 또는 실시(實施)되어야할 사항(事項)들에 의하여 고찰(考察)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 유전자(遺傳子) 보존(保存)을 위한 천연림(天然林)의 보존(保存) 선진제국(先進諸國)에서 천연림(天然林)의 이용개발(利用開發)이 성행(盛行)됨과 아울러 유전자(遺傳子)의 보존(保存)을 목적(目的)으로 하는 일부(一部) 천연림(天然林)의 지역별(地域別) 보존책(保存策)을 채택(採擇)하고 있는 실정(實情)에 비추어서 우리나라와 같이 천연림(天然林)이 거의 탕진(蕩盡)되고 있는 실정하(實情下)에서는 강송(剛松), 잣나무, 섬잣나무, 사시나무, 피나무 등(等) 자생수종(自生樹種)의 천연림(天然林)의 일부(一部)를 유전자보존림(遺傳子保存林)으로 확보(確保)하는 조처(措處)가 긴급(緊急)히 이루어져야할 일이다. 또한 우리나라 고유수종(固有樹種)에 대(對)한 천연림(天然林)의 구성(構成)과 기(其) 발달과정(發達過程)에 대(對)한 연구(硏究)도 근래(近來) 새 수단(手段)으로 등장(登場)한 isozyme의 연구(硏究)에 의(依)하여 수행(遂行)되어야 할 문제(問題)이다. 2. 수형목(秀型木) 수(數)의 증가(增加) 현하(現下) 우리나라의 수형목(秀型木) 수(數)는 기(其) 선발강도(選拔强度)가 지나치게 강(强)하였던 탓으로 그 수(數)가 소(小)하여 이에 의(依)한 채종원(採種園)은 일차조림용(一次造林用)으로는 가(可)하나 이대채종원(二代採種園)을 위(爲)한 모수(母樹)의 선택대상(選擇對象)으로는 중복선발(重複選拔)이 될 우려(憂慮)가 큰 고(故)로 선발강도(選拔强度)를 연화(軟化)하여서 기(其) 본수(本數)를 대폭(大幅) 증가(增加)시킬 필요(必要)가 있다. 3. 차대검정(次代檢定) 특수조합능력(特殊組合能力)을 강조(强調)해야 할 특별(特別)한 경우를 제외(除外)하고는 수형목(秀型木)의 풍매종자(風媒種子)에 의(依)한 차대검정(次代檢定)을 위주(爲主)로 함이 적당(適當)하다고 사료(思料)되나, 차대검정(次代檢定)의 연한(年限) 단축(短縮)을 위(爲)하여서 임목(林木)의 중요형질(重要形質)에 대(對)한 조기검정(早期檢定)에 관(關)한 연구(硏究)가 중요(重要)한 과제(課題)로서 다루어져야만 할것이다. 이와 관련(關聯)하여 zymography의 활용성(活用性) 연구(硏究)도 중요(重要)한 일이다. 4. 유전자형(遺傳子型)과 환경(環境)과의 교호작용(交互作用)에 관(關)한 연구(硏究) 종래(從來) 사실상(事實上) 입지조건(立地條件)이 양호(良好)한 임분(林分)에서 선발(選拔)된 수형목(秀型木)이 요박(療薄)한 임지(林地)에서도 그 우수성(優秀性)을 나타내는지의 여부(如否)를 구명(究明)하므로서 특수입지(特殊立地)를 위(爲)한 별도채종원조성(別途採種園造成)의 필요성(必要性) 유무(有無)를 하루속(速)히 구명(究明)해야하며 우리나라의 육종구(育種區)에 대(對)한 재확인(再確認)과 그 적용(適用)이 요청(要請)되는 일이다. 5. 윤엽수(潤葉樹)의 채종원(採種園) 천연림(天然林)의 구성분자(構成分子)로서 생장력(生長力)의 비교(比較)가 곤란(困難)한 윤엽수(潤葉樹)에 대(對)하여서는 외국(外國)에서 실시(實施)하는 바를 참고(參考)하여 선발목간(選拔木間)의 교잡차대(交雜次代)로서 차대검정림(次代檢定林)을 설치(設置)한후 이를 도태(陶汰) seedling seed orchard로 유도(誘導)하는 방법(方法)을 취(取)함이 가(可)하다고 사료(思料)된다. 6. 내병충성(耐病蟲性) 육종(育種) 소나무좀벌레, 솔잎흑파리 등(等) 충해(蟲害)와 낙엽송(落葉松)의 낙엽병(落葉病)과 포푸라 현병(鉉病) 등(等)은 유전자(遺傳子)에 의(依)하여 지배(支配)되는 것이 구명(究明)되고 있어 이에 대(對)한 내병충성(耐病蟲性) 육종(育種)을 계획실시(計劃實施)함을 요(要)한다. 7. 재질(材質) 특(特)히 목재비중(木材比重)에 대(對)한 육종(育種) 특(特)히 pulp 용재(用材)를 목적(目的)으로 하는 수종(樹種)에 대(對)하여서는 선진각국(先進各國)에 비추어서 목재비중(木材比重)에 대(對)한 육종(育種)의 실시(實施)가 요청(要請)된다. 8. 삼나무(Cryptomeria japonica) 및 편백(Chamaecyparis obtusa)의 도입(導入) 삼나무와 편백은 현재(現在) 남부(南部) 난대지대(暖帶地帶)에 국한(局限)하여 조림(造林)하고 있으나 일본(日本)에 있어서의 양수종(兩樹種)의 조림한계(造林限界)가 예상이상(豫想以上)으로 한냉(寒冷)한 지대(地帶)까지 실시(實施)되고 있는 실정(實定)에 비추어서 상기(上記) 양수종(兩樹種)에 대(對)한 도입시험(導入試驗)을 종래(從來)보는 한냉(寒冷)한 지대(地帶)까지 확대실시(擴大實施)할 필요(必要)가 있다고 인정(認定)되었다.

  • PDF

점토질 논 토양의 심층화가 토지생산성 및 유면건조에 미치는 영향 (Effects of the Development of Cracks into Deeper Zone on Productivity and Dryness of the Clayey Paddy Field)

  • 김철기
    • 한국농공학회지
    • /
    • 제15권3호
    • /
    • pp.3059-3088
    • /
    • 1973
  • 본연구(本硏究)에서는 연구(硏究)의 대상(對象)을 저습답(低濕畓)에 두기보다는 지하수위(地下水位)가 낮은 점질토(粘質土)의 건답(乾畓)에 두고 이 점질토(粘質土)논에 대(對)한 수잉전(移秧前)의 처리(處理)에 있어서 심경(深耕)을 한 것 답면(畓面)을 건조(乾燥)시켜 구열발달(龜裂發達)을 기(期)하게한 것 및 암거(暗渠)가 설치(設置)된 곳에서의 답면(畓面)을 건조(乾燥)시켜 구열발달(龜裂發達)을 기(期)하게 한 것 중에서 어떤 처리방법(處理方法)을 적용(適用)한 것이 뿌리신장(伸長)이 심층화(深層化)되여 벼의 수량(收量)을 높일 수 있고 동시(同時)에 지하배수기능(地下排水機能)이 제대로 발휘(發揮)되여 수확작업(收穫作業)에 대형기계(大型機械)를 도입(導入)하였을 때 농업기계(農業機械)의 주행성면(走行性面)에서 유리(有利)한가를 발견(發見)코저 한 것이다. 그래서 시험구처리(試驗區處理)에 있어서는 (1)이앙(移秧) 39일전(日前)에 경운(耕耘)하여 풍건(風乾)시킨 것(경운구(區)) (2) 이앙(移秧) 39일전(日前)에 경운(耕耘)하여 물로 포화(飽和)시켜 쓰린후(後) 구열(龜裂)을 발생(發生)시켜 이앙(移秧) 2일전(日前)에 15cm 깊이로 경운(耕耘)한 것(균열구(區)) (3) 이앙(移秧) 39일전(日前)에 암거설치(暗渠設置)와 동시(同時)에 경운(耕耘)하여 물로 포화(飽和)시켜 쓰린후(後) 구열(龜裂)을 발생(發生)시켜 이앙(移秧) 2일전(日前)에 15cm 깊이로 경운(耕耘)한 것(균암구(區))의 3요인(要因)에 15cm. 25cm, 35cm 깊이의 3수준(水準)으로 하고 15cm 깊이 경운구(區)를 Control구(區)로 정(定)하였는데 이에 의(依)하여 얻은 시험결과(試驗結果)는 대략(大略) 다음과 같이 요약(要約)될 수 있다. 1. 소비수량(消費數量)은 균암구(區)에 있어서는 경운구(區) 및 균열구(區)보다도 소비수량(消費水量)을 나타냈다. 따라서 유효우량은 균암구(區)에서 가장 크고 경운구(區), 균열구(區)의 순(順)으로 작은값을 나타냈고 순용수량(純用水量)에 있어서는 여전(如前)히 균암구(區), 경운구(區), 균열구(區)의 순(順)으로 작어저 균암구(區)가 가장 큰 양(量)을 나타냈다. 심도(深度)에 불구(不拘)하고 순용수량(純用水量)의 크기는 균암구(區)에서 105cm 내외(內外), 경운구(區)에서 70cm 내외(內外), 균열구(區)에서는 45cm 내외(內外)를 나타냈다. 2. 뿌리중량(重量)이 구열최대심도(龜裂最大深度)에 예민(銳敏)하게 영향(影響)을 받고 있는 경향(傾向)으로 미루어 볼 때 뿌리 발달(發達)은 답면상(畓面上)의 구열(龜裂)에 의(依)하기 보다는 구열심도(龜裂深度)에 더 큰 영향(影響)을 받는 것으로 되어 있다. 따라서 깊은구(區)일수록 뿌리중량(重量)은 커지는 경향(傾向)을 가졌고 처리간(處理間)에는 균열구(區), 균암구(區), 경운구(區) 순(順)으로 증대(增大)하는 경향(傾向)을 가졌다. 3. 초장(草丈)의 신장(伸長)에 있어서는 어느구(區)를 막론(莫論)하고 생육초기(生育初期)(분얼최성기(分얼最盛期))에는 별(別)로 차이(差異)를 발견(發見)할 수 없으나 생육중기(生育中期)(분얼종료기(分얼終了期)부터 유수형성기(幼穗形成期) 사이에서는 심도(深度)가 깊은구(區)일수록 그 성장(成長)이 떨어지고 생육후기(生育後期)(수잉기)(穗잉期)에 접어들면서 부터는 도리여 심도(深度)가 깊은구(區)가 얕은구(區)보다 더 왕성(旺盛)한 신장(伸長)을 하였다. 이것은 시험처리별(試驗處理別)로 볼 때 생육중기(生育中期) 이후(以後) 균열구(區)는 어느 다른 구(區)보다 떨어지고 균암구(區)와 경운구(區) 간(間)에는 별차이(別差異)는 없으나 균암구(區)가 여간(與干) 초장신장(草丈伸長)이 우세(優勢)한 경향(傾向)을 나타냈다. 4. 경수(數)에 있어서는 전생육기간(全生育期間)을 통(通)하여 심도(深度)가 깊은구(區)일수록 그 수(數)가 적어지는 경향(傾向)을 나타냈고 이것을 시험처별(試驗處別)로 볼 때 균열구(區)는 늘 균암구(區)와 경운구(區)보다 떨어졌으며 또 경운구(區)는 균암구(區)보다 약간(若干) 우세(優勢)한 경향(傾向)을 나타냈다. 5. 수량(收量)(조곡중)(租穀重))에 있어서는 시험처리별(試驗處理別) 각(各) 시험구(試驗區)의 수량(收量)을 Control 구(區) 15-경운구(區)와 대비(對比)할 때 35-경운구(區)에 있어서는 17%, 35-암거구(區)에 있어서는 10% 기타구(其他區)에 있어서는 모두 Control구(區)와 같거나 떨어졌다. 그리고 전체적(全體的)으로 볼 때 심도(深度)가 깊은구(區)일수록 수량(收量)은 증가(增加)하였고 경운구(龜)는 균암구(區)보다, 균암구(區)는 균열구(區)보다 수량(收量)이 높았으며 심도구(深度區)에는 1%의 유의성시험처리(有意性試驗處理)에는 5%의 유의성(有意性)이 존재(存在)하였다. 6. 조곡중(粗穀重)에 더 많은 영향(影響)을 주는 감수심(減水深)은 후기감수심(後期減水深)이며 15cm 구(區)에서는 2.7cm/day 이내(以內)에서 25cm 구(區)에서는 3.0cm/day 이내(以內)에서 35cm 구(區)에서는 3.3cm/day이내(以內)의 범위(範圍)에서 감수심(減水深)이 증대(增大)하면 조곡중(粗穀重) 증대(增大)하였고 동시(同時)에 동일감수심(同一減水深)에서는 심도(深度)가 깊은구(區) 일수록 조곡중(粗穀重)은 증대(增大)하였다. 따라서 동일감수심도(同一減水深度)가 깊은구(區)일수록 수량면(收量面)에서 유리(有利)함을 암시(暗示)하고 있다. 7. 뿌리중량(重量)에서 비례(比例)하여 조곡중(粗穀重)은 증대(增大)하였으며 벼뿌리중량(重量)이 동일(同一)할때는 심도(深度)가 깊은구(區)일수록 조곡중(粗穀重)은 증대(增大)하는 경향(傾向)을 보여주고 있다. 또 시험처리별(試驗處理別)로 볼 때는 벼뿌리 중량(重量)은 균열구(區), 균암구(區), 경운구(區)의 순(順)으로 컸고 따라서 조곡중(粗穀重)도 역시(亦是) 같은 순(順)으로 컸다. 그리고 조곡중(粗穀重)은 중간낙수기간(中間落水期間)의 최소함수비(最少含水比)와 그때의 평균지온(平均地溫)에 관계(關係)되나 함수비(含水比)가 40%이하(以下)에서는 평균지온(平均地溫)은 함수비(含水比)에 비례(比例)하여 증가(增加)하는 경향(傾向)이 있음으로 주(主)로 최소함수비(最小含水比)에 영향(影響)을 받는바가 크다. 8. 짚조곡중비(粗穀重比)는 심도(深度)가 얕은구(區)일수록 커지는 경향(傾向)을 보였고 또 벼뿌리중량(重量)에 역지수함수적(逆指數函數的)으로 증대(增大)하였다. 또 같은 심도(深度)의 구(區)에서는 15cm 구(區)를 제외(除外)하고는 짚조곡중비(粗穀重比)는 감수심(減水深)에 비례(比例)하여 증대(增大)하였다. 감수심(減水深)이 어느 한도(限度)까지 증대(增大)됨에 따라 조곡중(租穀重)이 증대(增大)하지만 동시(同時)에 짚조곡중비(粗穀重比)도 증대(增大)함을 보여주고 있다. 9. 동일토성(同一土性)에서 구열량(龜裂量)은 기상조건(氣象條件) 특(特)히 증발량(蒸發量)의 증대(增大)에 따라 증대(增大)하며 답면건조도중(畓面乾燥途中)에 강우(降雨)가 있으면 답면구열량(畓面龜裂量)은 현저(顯著)히 감소(減小)한다. 점질토(粘質土)의 구열량(龜裂量)은 대체(大體)로 함수비(含水比)가 25% 이상(以上)에서는 함량비(含量比)에 역지수적(逆指數的)으로 증가(增加)하는 경향(傾向)을 보였고 구열(龜裂)의 최대(最大) 심도(深度)는 31% 이하(以下)의 함수비(含水比)에서는 일정(一定)한 값을 유지(維持)하는 경향(傾向)이있다. 10. Cone 지수(指數)는 어느 한도(限度)까지는 구열량(龜裂量)에 비례(比例)하는 경향(傾向)이있으나 구열량(龜裂量)이 어느 한도(限度)를 넘으면 약간(若干) 구열량(龜裂量)에 역비례(逆比例)하는 경향(傾向)을 보여주고 있다. 그 한도(限度)의 함수비(含水比)는 25% 근처가 될 것이다. 11. 최종낙수후 (最終落水後)의 Cone 지수(指數)의 경시적(經時的) 증대(增大)는 생육후기(生育後期)의 감수심(減水深)에 비례(比例)하는 경향(傾向)을 보였고 동일감수심(同一減水深)에서 균암구(區)는 다른 두 구(區)보다 큰Cone지수(指數)를 나타냈고 경운구(區)는 심도(深度)가 깊은구(區)일수록 균열구(區)보다 작은 Cone 지수(指數)를 나타냈는데 특(特)히 35-경운구(區) Cone의 지수(指數)는 현저(顯著)하게 작은 값을 나타냈다. 12. 최종낙수후(最終落水後)의 답면건조(畓面乾燥)에 있어서는 함수비(含水比)의 감소상황(減少狀況) 및 Cone 지수(指數)의 증대상황(增大狀況)에 비추어 볼 때 시험처리별(試驗處理別)로는 균암구(區)가 다른 두 구(區)보다 밟르고 경운구(區)는 가장 늦어지고 심도(深度)가 깊은 구(區)에서는 더욱 늦어지고 있다. 농업기계(農業 機械)의 주행(走行)에 지장(支障)을 가져오지 않을 정도(程度)의 Cone 지수(指數)($2.5kg/cm^2$)로 답면건조(畓面乾燥)를 시키자면 최종낙수시기(最終落水時期)를 잡는 시기(時期) 및 낙수기간(落水期間)동안의 강우(降雨)의 유무(有無)에 따라 다르게지만 강우(降雨)가 전혀 없다면 누계계기증발량(累計計器蒸發量)을 기준(基準)으로 잡을 때 균암구(區)에서는 누계계기증발량(累計計器蒸發量)으로 약(約) 44mm가 필요(必要)하고 기타구(其他區)에서는 50mm 이상(以上)이 필요(必要)하게 됨으로 균암구(區)에서의 답면건조진행(畓面乾燥進行)은 대체(大體)로 경운구(區), 균열구(區)보다 2일이상(日以上)이 빠르며 35-경운구(區)와 비교(比較)하면 5일(日) 이상(以上)이나 빠르게 될 것이다.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

보건소 보건간호사의 역할변화, 역할수행의 장애요인과 만족도 (Role, Change, Job Satisfaction and Obstacles in Carrying out the Role of Public Health Nurses in Health Center)

  • 안경숙;정문숙
    • 농촌의학ㆍ지역보건
    • /
    • 제20권1호
    • /
    • pp.1-13
    • /
    • 1995
  • 본 연구는 변화되고 있는 지역사회보건사업의 요구에 따른 연도별 보건소 간호사들의 역할 변화, 역할 수행에 따른 장애요인 및 간호업무 수행과 관련하여 인지하는 직무만족도를 파악하고자 1992년 3월 19일부터 4월 11일까지 경상남도 보건간호사 270명을 대상으로 설문조사한 결과는 다음과 같다. 보건간호사들이 수행한 최우선 보건사업은 1970년 이전에는 가족계획사업, 1970 - 1979년대에는 간호업무, 1980 - 1989년대에는 모자보건사업, 1990 - 1992년대에는 간호업무이었다. 가족계획사업 내용의 우선순위는 1970년 이전에는 자궁내장치 삽입 권장과 경구피임약 또는 콘돔 배부에 역점을 두었으며 그 이후로는 가족계획 홍보를 우선으로 했다. 모자보건사업 내용의 우선순위는 1970년 이전부터 임부등록에 많이 두었으며 그 다음으로 산전진찰과 예방접종에 치중한 것으로 나타났다. 결핵관리사업 내용의 수선순위를 보면 각 년대마다 신환자 발견 등록에 치중하였으며 그 다음으로 환자관리 및 투약 주사에 비중을 두었다. 간호업무 냉용의 우선순위를 보면 1970년대 이전에는 순회진료에 역점을 두었으며 그 다음으로 주사 및 투약에 치중하였다. 전염병관리 내용의 우선순위는 1970년 이전부터 1순위였으며 그 다음으로 투약 및 주사에 치중하였다. 1990-1992년대에는 상담 및 교육이 2순위로 나타났다. 노인보건사업 내용의 수선순위가 1979년대 이전부터 순회진료가 1순위였으며 그 다음으로 검진보조가 2순위로 나타났다. 사업별 업무수행시 장애요인을 보면 가족계획 사업에서는 주민의 이해부족이 28.8%, 예산부족이 13.6%, 보건행정체계 미비가 11.9%였으며, 결핵사업에서는 주민의 이해부족이 32.5%, 업무과다(인원부족)가 15.6%, 기술이나 지식의 부족이 13.0%였다. 업무과다(인원부족)와 시설 장비의 부족이 각각 15.6%, 주님의 이해부족이 13.0%였다. 직급별 보건간호사의 직무만족도에서 경력이나 능력에 비해 승진기회여부는 불만이다가 8,9급이 64.7%로 높았으며 전문직 발전의 기회는 없다가 6,7급이 67.7%, 8,9급이 64.0%로 높았다. 보건업무에 필요한 물품과 시설의 만족여부에서 하위급으로 내려갈수록 만족도는 낮았으며 보수의 만족도에서는 적당하다가 6,7급이 64.7%, 너무 작다가 8,9급이 53.0%로 높았다. 직급별 보건간호사의 직업 긍지 만족도에서 직급이 높을수록 직업적 긍지의 직무만족도는 높았다. 직급별 현 직급에 대한 만족도는 하위급으로 내려갈수록 만족하는 사람의 비율은 높아졌다. 보건간호사의 경력(년)별 직무만족도에서 보건간호사 경력이 많을수록 직급, 승진기회, 전문직 발전의 기회에 대한 직무만족도는 낮게 나타났다. 보건간호사의 경력(년)별 직업 긍지 만족도에서 보건간호사 경력이 많을수록 직업적 긍지의 직무만족도는 높게 나타났다. 대상자의 37.6%가 이직할 의사가 있다고 하였으며, 승진기회의 부족, 근무여건의 불만이 이직 이유였다. 하력과 경력은 직무만족도 사이에 유의한 상관관계가 없었으며 직급이 낮을수록 직무만족도는 낮아 유의한 관련성을 나타내었다. 1차 보건의료사업을 수행토록 하기 위해서는 보건간호사의 인식이나 주민들의 인식을 새롭게 하기 위한 홍보활동 및 교육이 더 주어져야 할 것이며 보건간호사의 승진기회 및 직급에 대란 불만도가 높기 때문에 보건간호사의 승진제도개선 및 직무영역확대가 고려되어야 할 것이다. 그래서 간호업무에 만족할 수 있는 제도개선에 대해 고려해야 할 것으로 생각된다.

  • PDF

증류주(蒸溜酒) 숙성(熟成)에 관(關)한 연구(硏究) 제1보[第一報]-사과 증류주(蒸溜酒) 숙성(熟成)에 있어서 숙성통재(熟成桶材)로서 한국산(韓國産) 참나무 품종별(品種別) 이용적성(利用適性)에 관(關)하여- (Studies on Fine Spirits Aging [Part I]-On the Aptitude of the Korean Oak Varieties as Barrels for Aging Apple Fine Spirits-)

  • 이계호
    • Applied Biological Chemistry
    • /
    • 제20권1호
    • /
    • pp.66-80
    • /
    • 1977
  • 사과 증류주(apple One spirit) 숙성에 있어서 국산 참나무의 품종이 fine spirit숙성 술통재로서의 적성여부를 검토하는 기초적 연구의 일환으로 본 연구를 실행하여 다음과 같은 결과를 얻었다. 1. 양조 원료를 대체 할 수 있는 과실로서 현재 대량생산 되는 과실의 화학분석 결과는 다음과 같다. 사과 : (Apple) (Malus pumila Miller var domestica Schneider) 중 홍옥(Jonathan)은 총당 13.95%, 총산 0.46%, 휘발산 0.012%, pectin 0.20%, 국광(Ralls)은 총당 13.35%, 총산 0.43%, 휘발산 0.011%, pectin 0.455%이었다. 2. 사과중에는 당분과 산 이외에 cellulose, pectin, hemicellulose 등 때문에 사과즙수을이 떨어짐으로 Aspergillus niger SUAFM-430의 xylanase와 amylase, Aspergillus niger SUAFM-6의 cellulase, pectinase를 사과즙에 처리하여 사과즙의 수율을 향상시켰다. 그리고 이황산 처리로 과즙중 여러 미생물을 살균하고 배양효모로서 발효능이 우수한 sacharomyces cerevisiae var. ellipsoidens Rasse Johannisberg II (SUAFM-1018)을 사용하여 사과주를 양조하였다. 사과주(Apple wine)는 원료에 대한 수율이 $86{\sim}87%$이고 Jonathan, Ralls가 ethanol 13.5%, extract분 5.4%, methanol $0.04{\sim}0.05%$이었다. 3. 사과주의 증류수(fine spirit) 제조는 단식증류법(Pot still)으로 2회 증류로서 실험하였다. 사과(apple) fine spirit는 apple wine mash에 대한 수율이 86.6%이고, 홍옥(Jonathan) fine spirit는 pH 4.1, 국광(Ralls) fine spirit는 pH 4.2이었다. 4. 사과주를 증류하여 제조한 fine spirit를 숙성시키기 위하여 국산 참나무 24품종을 나무의 심재(心材) (Inner part)와 변재(邊材) (Outer part)를 사용하여 fine spirit의 숙성융통제를 선발하는 실험을 하였다. 참나무 24품종과 그의 심재, 변재 별로 참나무의 절편(oaa chip) $(1{\times}1{\times}5cm)$을 만들고 oakchip 2개를 각 fine spirit 300ml씩 들은 640ml용맥주병에 담그고, 6개월간 숙성시키면서 색, 향기, 맛 등을 조사하였다. A. 숙성용술통재 선발의 1차 screen결과로서 색추출속도가 우수한 참나무 품종은 다음 순서와 같다. 갈참나무(심재) Quercus aliena Blume(Inner part), 굴참나무(변재) Q variabilis Blume (Outer part), 갈참나무(변재) Q. aliena Blume (Outer part), 졸참나무(심, 변재) Q. serrata Thumb (Inner & Outer part), 신갈참나무(변, 심재) Q. mongolca Fisher (Outer & Inner part), 상수리 나무(변, 심재) Q. acutissima Carruthers (Outer & Inner part)의 순서등 5품종을 선정하였다. B. 숙성온도별 영향으로서 실온 $24{\sim}25^{\circ}C,\;30^{\circ}C,\;45^{\circ}C$ 별로 각 fine spirit에 oak chip을 넣고 숙성시킨 결과 $45^{\circ}C$에서 숙성시킨 것이 가장 숙성이 촉진 되었고 다음이 $30^{\circ}C$, 다음이 실온에서 한 순서의 경향이었다. C. 투명한 삼각후라스크에 각 fine spirit에 oak chip을 담그고 자외선 조사를 하여 3개월간 숙성 시켰드니 숙성효과가 contral구 보다 거의 2배가 촉진하는 흥미있는 사실을 확인하였다. D. 사과주에서 증류한 fine spirit 300ml에 2개의 oak chip을 담그어 숙성시킴에 있어 oak chip의 여러성분이 fine spirit에 용출되여 나오는 정도가 fine spirit의 pH에 중요한 관계가 있음을 알았다. E. 선정된 5개 품종의 oak chip과 블란서 참나무 술통재(Limousin white oak from France)를 control로 하여 각 사과주를 증류한 fine spirit에 2개의 oak chip($1{\times}1{\times}5cm$)을 담그고 실온, $(24{\sim}25^{\circ}C)$, $30^{\circ}C,\;45^{\circ}C$, 실온에서 자외선조사 하면서 각각 6개월간 매일주일 마다 진탕하면서 숙성시켰다. 6개월간 수성시킨 fine spirit(young brandy)의 관능 검사 결과는 다음과 같다. 불란서 oak chip의 실온 숙성한 fine spirit 하고 비슷한 것은 참갈나무 chip을 넣은 사과의 young bandy($45^{\circ}C$에서 숙성함)이었고 갈참나무 chip을 넣고 실온에서 UV-ray 조사한 사과의 young brandy는 불란서 oak chip의 실온 숙성한 young brandy 보다는 약간 떨어지지만 그런대로 국산 참나무를 각 fine spirit 숙성용으로 이용할 가치가 있음을 알았다.

  • PDF

소비자의 부정적 브랜드 루머의 수용과 확산 (Consumer's Negative Brand Rumor Acceptance and Rumor Diffusion)

  • 이원준;이한석
    • Asia Marketing Journal
    • /
    • 제14권2호
    • /
    • pp.65-96
    • /
    • 2012
  • 루머는 신뢰할 만한 타당한 근거나 이유가 없음에도 불구하고 광범위하게 이야기되는 일상적인 대화나 의견으로서 오랜기간 소비자 개개인의 사적 영역의 문제였다. 그러나 대중의 사랑과 주목을 받는 기업이나 브랜드는 선천적으로 소비자의 관심으로부터 멀어질 수 없으며, 항상 루머의 주요한 소재가 되어 왔다. 그 결과 현대의 소비자 커뮤니케이션 환경에서 루머는 기업 경영활동에 중요한 위기 요인이 되고 있다. 기업과 브랜드들이 당면하는 소비자 루머들은 크게 기업과 관련된 음모성 루머와 상품과 직접적 관련이 있는 오염성 루머로 나누어지며 국내외에서 많은 위기 사례들이 발견되고 있다. 심지어 P&G, SK, 현대, 삼성처럼 잘 정비된 홍보 조직을 갖춘 굴지의 대기업들조차 이런 루머로부터 자유롭지 못하며, 기존의 대응방식 역시 적절하지 못했던 것이 사실이다. 부정적 루머가 주목받아야 하는 이유는 해당 기업의 매출 및 점유율 하락은 물론 주식 가격에도 부정적인 영향을 미치며 오랜기간 구축해온 소비자와의 관계마저 황폐화시킬 가능성이 있기 때문이다. 최근 인터넷, 소셜 네트워크 서비스의 확산과 더불어 브랜드와 관련된 루머의 중요성은 더욱 증대하고 있으나 루머 연구는 지금까지 기업이나 마케팅 연구자의 정당한 주목을 받지 못하였다. 이에 본 연구는 루머의 다각적인 측면을 고려하는 상황주의자적 연구 패러다임을 기반으로 지각된 유용성, 원천 신뢰성, 메시지 신뢰성, 걱정, 생동감과 같은 루머와 관련된 속성들이 루머 수용강도와 루머 구전의도에 미치는 영향을 분석하였다. 이를 위하여 가상 브랜드와 루머가 제시되었으며, 실증조사를 통한 데이터 수집과 분석이 이루어졌다. 연구 결과에 따르면 원천 신뢰성, 메시지 신뢰성, 걱정, 생동감 같은 루머 특성 변수들은 루머 수용 강도에 유의한 영향을 미치고, 루머 수용강도는 루머 구전의도에 유의한 영향을 미치는 것으로 나타났다. 반면에 지각된 중요성은 루머 수용강도에 유의한 영향을 미치지 못하며, 상품 관여도의 조절효과 역시 유의하지 않은 것으로 나타났다. 본 연구는 주요한 실무적, 학문적 시사점을 제공하고 있다. 첫째, 루머를 자연발생적인 사회 현상이 아니라 소비자의 주요 활동의 일부이며, 마케터의 관심과 대응 커뮤니케이션 전략이 필요한 브랜드 관련 현상임을 주장하였다. 둘째, 브랜드 루머의 심리적, 사회적인 다차원적 구성 요인과 확산되는 경로를 제시함으로서 루머에 대한 능동적인 관리 가능성을 제시하였다. 셋째, 온라인상의 루머 활동이 기업 성과에 미치는 영향을 제시함으로서 기업들의 적극적인 온라인 커뮤니케이션 활동과 평판 관리의 필요성을 주장하였다. 넷째, 소비자의 걱정과 같은 부정적 정서가 루머의 온상이 되고 있음을 규명함으로서 소비자의 의혹을 불식시키기 위하여 정확하고 진실된 정보를 제공해야 함을 주장하였다. 다섯째, 루머의 유용성이 확산에 미치는 영향 가설이 기각되었으며, 상품 관여도의 조절 효과 역시 기각되었다. 이는 루머를 접하는 소비자의 입장에서 볼 때, 루머 자체가 무의미하더라도 단순한 재미나 호기심만으로도 얼마든지 확산될 가능성을 암시하고 있다. 일부 기업들은 사실이 아니라는 이유만으로 루머를 무시하거나 간과하는 경우들이 있으나, 기업의 예상과 다르게 루머가 얼마든지 확산될 수 있는 가능성을 보여주며, 기업의 보다 세심한 대응 전략의 필요성을 요구하고 있다.

  • PDF

화폐(貨幣)·금융개입(金融介入)의 이론적(理論的) 근거(根據)에 대한 고찰(考察) : 중앙은행(中央銀行)의 존립근거(存立根據)에 대한 개관(槪觀) (An Overview of the Rationale of Monetary and Banking Intervention: The Role of the Central Bank in Money and Banking Revisited)

  • 좌승희
    • KDI Journal of Economic Policy
    • /
    • 제12권3호
    • /
    • pp.71-94
    • /
    • 1990
  • 본고(本稿)서는, 최근 자유금융학파(自由金融學派)와 신화폐경제학과(新貨幣經濟學科)들의 등장으로 화폐(貨幣) 금융문제(金融問題)에서의 자유경쟁(自由競爭) 및 자유방임주의적(自由放任主義的) 사고가 새롭게 확산되고 있는 시점(時點)에서, 정부(政府) 및 중앙은행(中央銀行)의 화폐(貨幣) 금융개입(金融介入)의 이론적(理論的) 근거(根據)와 그에 관련된 논쟁(論爭)을 다음의 6가지 논거(論據)들을 중심으로 개관해 보았다 : (1) 자유금융하(自由金融下)의 銀行券(은행권) 초과발행(超過發行) 가능성(可能性), (2) 화폐사용에 있어서의 외부경제효과(外部經濟效果)와 화폐제도의 공공재적(公共財的) 성격(性格) (3) 화폐발행업무의 규모(規模)의 경제(經濟)와 자연독점적(自然獨占的) 성격(性格), (4) 실물부문(實物部門)의 불안정성(不安定性)과 거시안정화정책(巨視安定化政策)의 필요성, (5) 은행금융시장(銀行金融市場)의 불안정성(不安定性)과 은행파산(銀行破産)의 외부효과(外部效果), (6) 소액거래자(少額去來者) 및 예금자(預金者)의 보호(保護) 이러한 논거들에 의하면 외부화폐(外部貨幣)(outside money)의 공급은 전형적인 공공재이론(公共財理論)이나 기술적(技術的) 독점주장(獨占主張)이 적용되는 경우이기 때문에 외부화폐제도(外部貨幣制度)의 유지에 있어서 정부(政附)나 중앙은행(中央銀行) 독점(獨占) 및 개입(介入)이 불가피하고 또한 바람직하지만, 내부화폐(內部貨幣)(inside money)제도(制度)의 경우는 적절한 최소한의 안전장치만 강구된다면 최근의 자유금융학파(自由金融學派) 및 신화폐경제학과(新貨幣經濟學科)들의 주장과 같이 사적(私的) 자유경쟁(自由競爭)이 보다 활성화되도록 하는 것이 바람직할 것으로 판단된다 . 한편 외부화폐제도(外部貨幣制度)에의 개입(介入)에 따른 (정부(政府) 및) 중앙은행(中央銀行)의 거시통화정책기능(巨視通貨政策機能)은 물론, 보다 자유화(自由化)된 내부화폐제도하(內部貨幣制度下)에서도 중앙은행(中央銀行)의 최종대여자기능(最終貸與者機能)과 미시적(微視的) 감독기능(監督機能)은 동(同) 제도(制度)의 안전성(安全性)을 유지하기 위해 중요한 역할을 할 것으로 보인다.

  • PDF

Bleomycin 유도 폐 섬유화에 있어서 성장인자 및 Cytokine의 역할 (Role of Growth Factors and Cytokines on Bleomycin Induced Pulmonary Fibrosis)

  • 이용희;정순희;안철민;김성규;조상호
    • Tuberculosis and Respiratory Diseases
    • /
    • 제44권4호
    • /
    • pp.871-888
    • /
    • 1997
  • 연구배경 : 특발성 폐 섬유화확 병인론으로 폐포염과 폐에 침윤한 염증세포 및 폐 조직자체의 실질세포들이 성장인자를 포함한 다양한 cytokine을 분비하여 실질조직을 구성하는 세포에 손상을 야기함으로써 종국에는 섬유화를 초래하는 것으로 이해하고 있다. 그러나 이들에 대한 개괄적인 연구가 부족하고 매개체 각각에 대한 단편적인 논문들뿐이어서 본 연구에서는 BLM유도 폐 손상및 섬유화의 발생기전에 있어서 IL-1, IL-6, TNF-$\alpha$와 TGF-${\beta}_1$, PDGF, bFGF들의 역할을 규명하고자 하였다. 방 법 : Wistar백서를 정상대조군, BLM투여군, BLM과 비타민 E병합투여군으로 나누었고 BLM 투여후 제 1, 2, 3, 4, 5, 7, 14, 21, 28일에 각각 도살한 다음 기관지폐포 세척술을 시행하여 시기별 총 세포수, 세포 구성성분비율을 살펴보았고 TGF-${\beta}_1$, PDGF, bFGF, IL-1, IL-6, TNF-$\alpha$에 대한 면역조직화학 염색, TGF-${\beta}_1$ mRNA에 대한 동소보합결합검사를 시행, 각 매개체의 생성소, 발현분포 및 정도를 분석하였다. 결 과 : BLM 투여후 1~7 일에 중성구와 기관지상피세포에서 생성된 IL-1, IL-6는 폐손상부위로 원하는 것으로 생각되며 7일이내에 기관지상피세포에서의 IL-1, IL-6 의 양성발현은 기관지상피세포가 BLM 유도 폐 섬유화시 기도주변에서 일어나는 염증 및 면역반응을 항진 및 유지시키는 간접증거로 생각된다. TNF-$\alpha$는 BLM투여후 1~5일에는 기관지상피세포, 중성구가 주생성소로 폐손상부위로의 염증세포의 이동에 주요역할을 하는 것으로 생각되며 7~28일에는 대식세포가 주생성소로서 섬유화를 촉진시키는 것으로 생각된다. TGF-${\beta}_1$은 기관지 상피세포, 대식세포가 주생성소로서 섬유모세포가 표적세포로 생각되며 섬유모세포가 세포외 기질을 생성하도록 자극하고 대식세포에서 유리된 PDGF와 함께 섬유모세포의 증식을 자극한다. 대식세포 및 섬유모세포에서 유리된 bFGF는 TGF-${\beta}_1$과 함께 교원질과 같은 세포외기질의 생성을 자극하는 것으로 여겨진다. 비타민 E와 BLM 병합투여군의 경우 6가지 성장인자 및 cytokine의 발현세포는 같았으나 발현세포수는 극히 미미하였고 trichrome염색상 섬유화도 미약하였다. 결 론 : BLM으로 인한 혈관내피 및 폐포상피세포 손상이후 침윤한 중성구 및 기관지 상피세포가 IL-1, IL-6, TNF-$\alpha$를 분비하여 BLM투여 1~7 일에 많은 수의 중성구를 동원하도록 유도하며 이들이 유리하는 다양한 효소 및 산소유리기가 폐의 정상구조를 파괴하여 섬유화를 시작하게 하는 것으로 생각한다. 손상이 진행됨에 따라 BLM투여 7~28 일에 대식세포가 유리하는 TGF-${\beta}_1$, PDGF, bFGF, TNF-$\alpha$는 섬유모세포를 자극, 이들의 증식을 유도하고 또한 세포외기질의 생성증가를 유도하여 폐 섬유화를 진행시키는 것으로 사료되며 TNF-$\alpha$는 BLM투여후 전 기간에 걸쳐 다수의 세포에서 발현된 점으로 미루어 섬유화에 있어서 TGF-${\beta}_1$ 못지않은 중요한 역할을 하는 것으로 여겨진다. 또한 비타민 E가 BLM유도 폐 손상으로 인한 폐 섬유화의 정도를 감소시키는 것으로 생각한다.

  • PDF