• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.463-471
• /
• 2008

This study investigated the clinical effectiveness and safety of sealed bleaching compared to conventional in-office bleaching using a randomized clinical trial of split arch design. Ten participants received a chairside bleaching treatment on the upper anterior teeth, and each side was randomly designated as sealed or control side. A mixture of Brite powder (PacDent, Walnut, USA), 3% hydrogen peroxide and carbamide peroxide (KoolWhite, PacDent, Walnut, USA) were used as bleaching agent. The control side was unwrapped and the experimental side was covered with a linear low density polyethylene (LLDPE) wrap for sealed bleaching. The bleaching gel was light activated for 1 hour. The tooth shades were evaluated before treatment, after treatment, and at one week check up by means of a visual shade (VS) assessment using a value oriented shade guide and a computer assisted shade assessment using a spectrophotometer (SP). The data were analyzed by paired t-test. In the control and sealed groups, the visual shade scores after bleaching treatment and at check up showed statistically significant difference from the preoperative shade scores (p<.05). The shade scores of the sealed group were significantly lighter than the control immediately after bleaching and at the check-up appointment (p<0.05). Compared to prebleaching status, the ${\Delta}E$ values at post bleaching condition were $4.35{\pm}1.38\;and\;5.08{\pm}1.34$ for the control and sealed groups, respectively. The ${\Delta}E$ values at check up were $3.73{\pm}1.95\;and\;4.38{\pm}2.08$ for the control and sealed groups. ${\Delta}E$ values were greater for the sealed group both after bleaching (p<.05) and at check up (p<.05). In conclusion, both ${\Delta}E$ and shade score changes were greater for the sealed bleaching group than the conventional bleaching group, effectively demonstrating the improvement of effectiveness through sealing.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.26-32
• /
• 2004

Growth and yield of cucumber (Cucumis sativus L.) with arch training method were evaluated on several training heights, planting densities, and topping node orders. Cucumber cultivar 'Eunsung-baekdadagi' was planted on 9 June with three training heights of 1.5, 1.8, and 2.1 m, there planting densities of 90${\times}$40, 90${\times}$50, and 90${\times}$60 cm, and five topping node orders of 20th, 30th, 35th, and nontopping. The plot of 2.1 m training height resulted in the higher sun-scald fruit rates due to the higher temperature above 37$^{\circ}C$ in the upper space of plastic house. The plot of 1.8 m arch training height showed higher fruit setting and marketable yield rate compared to the other training heights. The maketable yield rate with 1.8 m height arch training was 102,691 kg ${\cdot}$ $ha^{-1}$, 21% higher value than that of 1.5 m. Powdery mildew incidence increased with the increase of planting density. Lower LAI were shown depending on the higher topping node order. Lower light transmission ratio was shown in the higher planting density plots, might be due to the crowded stems and leaves inside those plots. Fruit setting rate was also higher in main stems rather than in lateral ones. Marketable yie이 in 90${\times}$50 cm planting distance with 35th node topping treatment was 98,311 kg ${\cdot}$ $ha^{-1}$, 5% higher than that 90${\times}$40 cm planting distance with 30th node topping treatment. Thus the 1.8 m of training height, 90${\times}$50 cm of planting distance, and 35th node topping was evaluated for the effective cultivation condition in arch training of cucumber in highland.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.605-619
• /
• 2019

The objective of this study was to analyze eutrophication characteristics, empirical model analysis, and variation of water quality according to monsoon intensity in Hapcheon Reservoir for 16 years from 2002 to 2017. Long-term annual water quality analysis showed that Hapcheon Reservoir was in a meso-nutrition to eutrophic condition, and the eutrophic state intensified after the summer monsoon. Annual rainfall volume (high vs. low rainfall) and the seasonal intensity in each year were the key factors that regulate the long-term water quality variation provided that there is no significant change of the point- and non-point source in the watershed. Dry years and wet years showed significant differences in the concentrations of TP, TN, BOD, and conductivity, indicating that precipitation had the most direct influence on nutrients and organic matter dynamics. Nutrient indicators (TP, TN), organic pollution indicators (BOD, COD), total suspended solids, and chlorophyll-a (Chl-a), which was an estimator of primary productivity, had significant positive relations (p<0.05) with precipitation. The Chl-a concentration, which is an indicator of green algae, was highly correlated with TP, TN, and BOD, which differed from other lakes that showed the lower Chl-a concentration when nutrients increased excessively. Empirical model analysis of log-transformed TN, TP, and Chl-a indicated that the Chl-a concentration was linearly regulated by phosphorus concentration, but not by nitrogen concentration. Spatial regression analysis of the riverine, transition, and lacustrine zones of $log_{10}TN$, $log_{10}TP$, and $log_{10}CHL$ showed that TN and Chl-a had significant relations (p<0.005) while TN and Chl-a had p > 0.05, indicating that phosphorus had a key role in the algal growth. Moreover, the higher correlation of both $log_{10}TP$ and $log_{10}TN$ to $log_{10}CHL$ in the riverine zone than the lacustrine zone indicated that there was little impact of inorganic suspended solids on the light limitation in the riverine zone.

• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.1-11
• /
• 1963

This treatise is to set up a fundamental condition of checking silk lousiness and to set up a new improving method of cocoon bave lousiness after super refining treatment. It is also studied whether silk lousiness can be eliminated through the observation of the silk gland, or the lousiness can be able to improve through such a study. The conclusions obtained in this paper are as follows. 1. Silk lousiness is able to be observed most properly when the light direction and the fiber direction are parallel in plan view of the silk cloth and the greater the angle between them is, the less the lousiness is observed. When, however, the angle is greater than some specific angle(30$^{\circ}$), no more lousiness is observed. This specific angle is named by the author as Lousiness Horizontal Critical Angle. 2. Silk lousiness can be observed when the angle of light incidence against the silk cloth is six degrees, while the larger the angle is, the less the lousiness is observed. When, however, the angle is greater than same specific angle(45$^{\circ}$) the lousiness disappears. Such a specific angle is named by the author as Lousiness Vertical Critical Angle. 3. The best textile composition to decrease lousiness defect is plan weave, while twill and satin weave show more lousiness with the same silk fiber. 4. Lousiness was classified as Lousiness A, B, ana C of which A was the general lousiness, B was the group type, and C was the glucose type and the standard photographs for the lousiness grading of these types were prepared. 5. The proper soap-refining hours of silk for lousiness test was eight hours. 6. The greater the difference of fiber diameter between the cocoon single bave and the splitend was, the more lousiness was composed. The normal splitends were measured as 1/4-1/5 of the main fiber. 7. The lousiness was found at the cocoon shape ends more than other parts, and found at the middle cocoon layer than other layer which was imagined to be as a result of poor uniform bave spinning of silk worm. 8. Female cocoon had more lousiness than the male cocoon. 9. It was found that there was a great possibility to have the splitends through the observation of the anatomical silkgland, and the author reached a conclusion that the lousiness can be improved to a certain degree only by the elimination of abnormal silk gland from the breeding aspects. 10. The cocoon bave of the offspring after super refining lousiness test and selection showed more improved lousiness defect than that of the parents.

• Journal of Climate Change Research
• /
• v.5 no.1
• /
• pp.1-12
• /
• 2014

With continued economic growth, Korea has seen an increase in the nighttime activities of its citizens as hours of activity have extended into night. There is an increasing trend in energy consumption related to citizens' nighttime activities. In order to analyze ideas for an efficient replacement of the power consumption of streetlights and for profit generation by applying grid-type solar systems, this study used an RETScreen model. Through energy analysis and cost analysis, the application benefit and viability of grid-type solar street light systems were analyzed. With analysis result of a total weekly power generation of 114 kWh via a grid-connected solar streetlight system, it was shown that the net present value of a grid-connected solar street light system is 155,362 KRW, which would mean a payback period of about 5.2 years, and as such, it was shown that profit could be generated after about 6 years. In addition, if the grid-connected solar power generation system proposed by this study is to be applied, it was shown that 401,935 KRW in profit could be generated after the 20-year useful life set for the solar system. In addition, the sensitivity analysis was performed taking into account the price fluctuations of SMP, maintenance. As a result, a payback period has increased by 1~2 years, and there were no significant differences. Because the most important factor that affect the economic analysis is the cost of supply certification of renewable energy, a stable sales and acquisition of this certification are very important. the Seoul-type Feed in Tariff(FIT) connected to other institutions will enable steady sales by confirming to purchase the certification for 12 years. Therefore, if those issues mentioned above are properly reflected, Central-grid PV system project will be able to perform well in the face of unfavorable condition of solar PV installation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.110-117
• /
• 2019

Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to $0^{\circ}$ and $100{\mu}m$, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, $5^{\circ}C/55^{\circ}C$). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (${\alpha}=.05$). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.511-519
• /
• 2021

The Perilla frutescens var. japonica HARA is widely cultivated in Korea for vegetable leaves and oil seeds. Perilla species have been used for food and medicine and are known to contain many functional compounds. In this study, we investigated the functional compound contents of Perilla during its growth stages to analyze the optimal harvest time and conditions. The contents of the Perilla sprouts were analyzed according to culture environment and days of growth. Sprouts grown in soil under natural light conditions showed high rosmarinic acid (23.19±0.16 mg/g) and GABA (0.55±0.05 mg/g) content. Therefore, the results suggest that 6 to 8 days after sowing in soil under natural light conditions was the optimum harvest condition for sprouts. Also, the functional compounds of Perilla were analyzed according to growth stage and plant part. As a result, caffeic acid and rosmarinic acid exhibited the highest content in the stage from vegetative growth to reproductive growth (0.28±0.03 ~ 0.30±0.07 mg/g rosmarinic acid and 20.60±7.02 ~ 19.37±3.18 mg/g caffeic acid), and luteolin and GABA showed the highest content in the reproductive growth stage and in the early stages of vegetative growth, respectively (31.11±2.98 ~ 22.35±1.64 ㎍/g luteolin and 0.42±0.09 ~ 0.37±0.04 mg/g GABA). It was confirmed that the content of caffeic acid (0.34±0.03 mg/g), rosmarinic acid (55.22±9.33 mg/g) and luteolin (1,044.89±6.72 ㎍/g) was the highest during the bolting stage. Overall, we identified the timing of the highest level of functional compounds in the sprouts and mature leaves of Perilla. These results suggest a suitable harvest time and conditions for sprouts and leaves for the use of Perilla as a functional material.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.485-496
• /
• 2022

Modern agriculture is being transformed into smart agriculture to maximize production efficiency along with changes in the 4th industrial revolution. However, rural areas in Korea are facing challenges of aging, low fertility, and population outflow, making it difficult to transition to smart agriculture. Among ICT technologies, simulation allows users to observe or experience the results of their choices through imitation or reproduction of reality. The combination of the three-dimension (3D) model and the greenhouse simulator enable a 3D experience by virtual greenhouse for fruits and vegetable cultivation. At the same time, it is possible to visualize the greenhouse under various cultivation or climate conditions. The objective of this study is to apply the greenhouse climate management model for simulation development that can visually see the state of the greenhouse environment under various micrometeorological properties. The numerical solution with the mathematical model provided a dynamic change in the greenhouse environment for a particular greenhouse design. Light intensity, crop transpiration, heating load, ventilation rate, the optimal amount of CO₂ enrichment, and daily light integral were calculated with the simulation. The results of this study are being built so that users can be linked through a web page, and software will be designed to reflect the characteristics of cladding materials and greenhouses, cultivation types, and the condition of environmental control facilities for customized environmental control. In addition, environmental information obtained from external meteorological data, as well as recommended standards and set points for each growth stage based on experiments and research, will be provided as optimal environmental factors. This simulation can help growers, students, and researchers to understand the ICT technologies and the changes in the greenhouse microclimate according to the growing conditions.

• Journal of the Korean association of regional geographers
• /
• v.16 no.3
• /
• pp.324-337
• /
• 2010

We believe, 'Dokdo is clearly an inherent territory of Korea, in the light of geographical and historical facts', This paper aims to discuss Japanese multidimensional approach on the Issues of Dokdo(Takeshima) in the context of Territory Education. We considered the matter from various angles that supported by the ministry of Foreign affairs and the ministry of Education in national scale, as well as shimane prefecture government and municipality scale. Therefore, It is likely that the approach of territory education on Dokdo in Japan is variable and potential, and is temporary state of condensation, depends on Korea-Japan's political, economical, social, and international conditions. More studies of the new approach must be done for the new implications of Territory Education that embraces all meanings and events according to the disposition of neighbouring condition of Dokdo in world context, keeping out emotional and nationalist sympathies. The result of consideration in this paper are as follows. First, Territory Education in japan was focused on geography, history, Civil, Social Studies, compared with focusing on History in Korea. Second, It is centered on "korea is illegally occupying Dokdo, against which Japan has been consistently making strong protests" rather than simple historical approach. Thirdly, Their approaches seek to be succeeded the identity and importance of Territory Education to next generation rather than the present solving problem.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.412-421
• /
• 2012

The yerba mate that grows in the subtropical forests of South America is an evergreen tree within the Aquifoliaceae family. The yerba mate (Ilex paraguariensis) tea is habitually used as a drink in Argentina, Paraguay, Uruguay, and Southern Brazil. A wild mate tree needs about 25 years to fully grow to 15 a height of meters; however, they only grow to a height of 3-5 meters when cultivated. The leaves are 7-11 cm long and 3-5cm wide with a serrated margin. Yerba mate tea-based beverages are made from the leaves and stems of the mate tree. It is known that they contain a rich content of antioxidants and polyphenol, vitamins, amino acids, minerals and colorants. Dyeing properties of a mate plant in the silk, wool, linen and cotton fabrics were investigated. Constituents of colorant of mate tea are chlorophyll and carotinoid; in addition, it has more minerals such as (Fe, Ca, Mn, Mg, Na, K, Zn, and Cu) than green tea. Mate tea colorants showed good affinity to silk and wool fabrics. It was found that the optimum condition for dyeing was 30 minutes for dyeing time, 7 for pH of dyebath, and at a dyeing temperature of $80^{\circ}C$. The maximum absorbance wavelength (${\lambda}_{max}$) of silk and wool fabrics dyed with mate tea were at 420-440nm; however, that of linen and cotton fabrics were at 400nm. K/S values of fabrics dyed under optimum conditions were 1.979 for silk fabrics, 1.541 for wool fabrics, 0.551 for linens and 0.465 for cotton fabrics. Munsell hue values of dyed fabrics measured 3.1Y-6.4GY for silk, 1.4Y-8.3Y for wool, 5.5Y-3.7GY for linen, and 5.3Y-1.3GY for cotton. All dyed fabrics showed hues in-between greenish yellow and greenyellow. Colorfastness to rubbing, perspiration and dry-cleaning of dyed fabrics with mate tea were very good; however, the grades of colorfastness to washing of dyed linen and cotton fabrics were poor, and colorfastness to light were poor.