• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.283-287
• /
• 2014

Cultivation of microalgae using wastewater exhibits several advantages such as nutrient removal and the production of high valuable products such as lipid and pigments. With this study, two types of wastewater from instant noodle factory; mixed liquor suspended solids (MLSS) and effluents after sedimentation tank were investigated for green microalga Scenedesmus sp. cultivation under laboratory condition. Optimal wastewater dilution percentage was evaluated in 24 wells microplate. MLSS and effluent without dilution showed the highest specific growth rate (${\mu}$) of $1.63{\pm}0.11day^{-1}$ and $1.57{\pm}0.16day^{-1}$, respectively, in which they were significantly (p < 0.05) higher than Scenedesmus sp. grown in BG11 medium ($1.08{\pm}0.14day^{-1}$). Ten days experiment was also conducted using 2000 ml Duran bottle as culture vessel under continuous light at approximately 5000 lux intensity and continuous aeration. It was found that maximum biomass density of microalgae cultivated in MLSS and effluent were $344.16{\pm}105.60mg/L$ and $512.89{\pm}86.93mg/L$ respectively and there was no significant (p < 0.05) difference on growth to control (BG11 medium). Moreover, cultivation microalgae in wastewater could reduce COD in wastewater by 39.89%-73.37%. Therefore, cultivation of Scenedesmus sp. in wastewater from instant noodle factory can yield microalgae biomass production and wastewater reclamation using photobioreactor simultaneously.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.71-78
• /
• 2004

Real time and robust algorithm to extract the features of watermelon was developed from the remotely transmitted image of the watermelon. Features of the watermelon at the cultivation site such as size and shape including position are crucial to the successful tole-robotic operation and development of the cultivation data base. Algorithm was developed based on the concept of task sharing between the computer and the operator utilizing man-computer interface. Task sharing was performed based on the functional characteristics of human and computer. Identifying watermelon from the image transmitted from the cultivation site is very difficult because of the variable light condition and the complex image contents such as soil, mulching vinyl, straws on the ground, irregular leaves and stems. Utilizing operator's teaching through the touch screen mounted on the image monitor, the complex time consuming image processing process and instability of processing results in the watermelon identification has been avoided. Color and brightness characteristics were analyzed from the image area specified by the operator's teaching. Watermelon segmentation was performed using the brightness and color distribution of the specified imae processing area. Modified general Hough transform was developed to extract the shape, major and minor axes, and the position, of the watermelon. It took less than 100 msec of the image processing time, and was a lot faster than conventional approach. The proposed method showed the robustness and practicability in identifying watermelon from the wireless transmitted color image of the cultivation site.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.789-795
• /
• 2016

Laser-induced combustions and explosions generated by high laser irradiances were explored by Laser-Induced Breakdown Spectroscopy (LIBS). The laser used for target ablation is a Q-switched Nd:YAG laser with 7 ns pulse duration at wavelength of 1064 nm laser energies from 40 mJ to 2500 mJ ($6.88{\times}10^{10}-6.53{\times}10^{11}W/cm^2$). The plasma light source from aluminum detected by the echelle grating spectrometer and coupled to the gated ICCD(a resolution (${\lambda}/{\Delta}{\lambda}$) of 5000). This spectroscopic study has been investigated for obtaining both the atomic/molecular signals of aluminum-oxygen and the calculated ambient condition such as plasma temperature and electron density. The essence of the paper is observing specific electron density ratio which can support the processes of chemical reaction and combustion between ablated aluminum plume and oxygen from air by inducing high laser energy.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.114-118
• /
• 2005

The experiment was conducted to establish the blanching culture of chicon expected to become exporting crop, for preventing Korea fiom importing the ffreign chicon and increasing the growers' profits, the days of blanching culture are based on the 5 treatments such as 10 days, 15 days ,20 days, 25 days, and 30 days. In the blanching culture days of chicory, the growth was good as blanching culture days were longer, there were too many outer leaves, and the ratio of bolting was $16\%$ on the 25 days, $30\%$ on the 30days. On the 10th day, the weight of chicon was light, the hardness was low, the density was low. The quality of chicon had no differences among the treatments. Therefore, the optimal condition for blanching culture of chicory is that the days of blanching culture is 20 days.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.3
• /
• pp.349-360
• /
• 2018

Autophagy has been studied as a therapeutic strategy for cardiovascular diseases. However, insufficient studies have been reported concerning the influence of vascular smooth muscle cells (VSMCs) through autophagy regulation. The aim of the present study was to determine the effects of VSMCs on the regulation of autophagy under in vitro conditions similar to vascular status of the equipped micro-tubule target agent-eluting stent and increased release of platelet-derived growth factor-BB (PDGF-BB). Cell viability and proliferation were measured using MTT and cell counting assays. Immunofluorescence using an $anti-{\alpha}-tubulin$ antibody was performed to determine microtubule dynamic formation. Cell apoptosis was measured by cleavage of caspase-3 using western blot analysis, and by nuclear fragmentation using a fluorescence assay. Autophagy activity was assessed by microtubule-associated protein light chain 3-II (LC-II) using western blot analysis. Levels of intracellular reactive oxygen species (ROS) were measured using $H_2DCFDA$. The proliferation and viability of VSMCs were inhibited by microtubule regulation. Additionally, microtubule-regulated and PDGF-BB-stimulated VSMCs increased the cleavage of caspase-3 more than only the microtubule-regulated condition, similar to that of LC3-II, implying autophagy. Inhibitory autophagy of microtubule-regulated and PDGF-BB-stimulated VSMCs resulted in low viability. However, enhancement of autophagy maintained survival through the reduction of ROS. These results suggest that the apoptosis of conditioned VSMCs is decreased by the blocking generation of ROS via the promotion of autophagy, and proliferation is also inhibited. Thus, promoting autophagy as a therapeutic target for vascular restenosis and atherosclerosis may be a good strategy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.65-65
• /
• 2007

Microstructure and surface roughness of the sensing materials should be improved to use them in advanced sensor applications because the uneven surface roughness degrades the light reflection, pattern resolution, and devices performance. Chemical mechanical polishing (CMP) processing was selected for improving the surface roughness of $CeO_2$ which is one of the well known materials for the oxygen gas sensors. Surface roughness and removal rate of spin coated $CeO_2$ thin films were examined with a change of CMP process parameters such as down force and table speed. The optimized process condition, reflected by the surface roughness with the hillock-free surface as well as the excellent removal rate with the good uniformity, was obtained. The effects of the improved surface roughness on the sensing property of $CeO_2$ thin films were also confirmed. The improved sensitivity of $CeO_2$ thin films for oxygen sensors were obtained after CMP process by the improved surface characteristics. Therefore, we conclude that sensing property of $CeO_2$ thin film is strongly dependent on the surface roughness of $CeO_2$ thin films by using CMP process.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.5
• /
• pp.68-74
• /
• 2012

The objective of this study is to examine a releasable asbestos sampler developed for measuring friable asbestos from soil to air controlled by wind velocity and water contents. Asbestos contaminated soil with 3.75% at the Sinsuk-asbestos mine was sampled, air-dried and sieved to 100 mesh, then homogenized during 24 hours' agitation. Various wind velocities, 1 m/s, 2 m/s, 3 m/s, and 5 m/s, were applied to evaluate releasable characteristics of the releasable asbestos sampler. In addition, soils with 1.0%, 3.4%, 4.4%, 11.0%, 16.2%, and 20.0% of water contents were also examined the amount of friable asbestos by the releasable asbestos sampler. Collected soil and air samples were analyzed by polarized light microscopy (PLM) and phase contrast microscopy (PCM), respectively. Those contents were applied to calculate an excess life cancer risk (ELCR). This study also discussed the relationship with risk assessment by a weeding scenario of activity based sampling (ABS) and field applied releasable asbestos sampler. The result was shown that friability of asbestos in soil increased with wind velocity and decreased with water content. In comparison with ELCR results, over 10E-4 of cancer risk was found in condition on < 5% water content and > 3m/s wind velocity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.124-124
• /
• 2010

Much interest has been focused on InGaN-based materials and their quantum structures due to their optoelectronics applications such as light emitting diode (LED) and photovoltaic devices, because of its high thermal conductivity, high optical efficiency, and direct wide band gap, in spite of their high density of threading dislocations. Build-in internal field-induced quantum-confined Stark effect in InGaN/GaN quantum well LED structures results in a spatial separation of electrons and holes, which leads to a reduction of radiative recombination rate. Therefore, many growth techniques have been developed by utilizing lateral over-growth mode or by inserting additional layers such as patterned layer and superlattices for reducing threading dislocations and internal fields. In this work, we investigated various characteristics of InGaN multiple quantum wells (MQWs) LED structures grown on selectively wet-etched porous (SWEP) GaN template layer and compared with those grown on non-porous GaN template layer over c-plane sapphire substrates. From the surface morphology measured by atomic force microscope, high resolution X-ray diffraction analysis, low temperature photoluminescence (PL) and PL excitation measurements, good structural and optical properties were observed on both LED structures. However, InGaN MQWs LED structures grown on SWEP GaN template layer show relatively low In composition, thin well width, and blue shift of PL spectra on MQW emission. These results were explained by rough surface of template layer, reduction of residual compressive stress, and less piezoelectric field on MQWs by utilizing SWEP GaN template layer. Better electrical properties were also observed for InGaN MQWs on SWEP GaN template layer, specially at reverse operating condition for I-V measurements.

• Korean Journal Plant Pathology
• /
• v.14 no.2
• /
• pp.109-114
• /
• 1998

To investigate Phomopsis species causing fruit decays of Japanese apricot, apple and kiwifruit, we collected diseased fruits from the fruit markets in 1995 and 1996 respectively. Phomopsis mali Roberts was identified based on cultural characteristics, morphological aspects and pathogenicity. There were no remarkable differences with respect to $\alpha$ and $\beta$ conidia, growth rates and colony characters among the isolates from Japanese apricot, apple and kiwifruit. The pathogens grew more than 70 mm on potato dextrose agar in 5 days at $25^{\circ}C$. The agar was slightly discolored by the production of a reddish purple pigment under the light at $25^{\circ}C$ and 3$0^{\circ}C$ respectively. Only $\alpha$ spores of the different isolates of P. mali were formed at 15$^{\circ}C$ and $\beta$ spores were mainly produced at 3$0^{\circ}C$, but and $\alpha$ and $\beta$ spores were produced in approximately equal numbers at 2$0^{\circ}C$ and $25^{\circ}C$. Pycnidia were a few under the dark condition but were abundant at wide range of 15~3$0^{\circ}C$ under near ultra violet illumination. Conidia were two types : $\alpha$ spores were unicellar, fusoid, hyaline and biguttulate, whereas $\beta$ sores were unicellar, acicular to filiform, straight or hooked and hyaline. An ascigerous stage was not formed in cultures or in nature. Isolates of Phomopsis mali from japanese apricot, apple and kiwifruit could infect fruits of apple, pear, apricot, Japanese apricot and kiwifruit. There were some differences in pathogenicity depending on stocks of fruit crops tested.

• Korean Journal of Acupuncture
• /
• v.29 no.1
• /
• pp.17-22
• /
• 2012

Objectives : The purpose of this study is to discuss the diagnostic classification of the traditional medicine for pilosis, and the hair removal treatments in traditional medicine and its clinical application. Backgrounds : In recent years, appearance and beauty have become main interest that have positioned in the medical area. In clinical Korean medicine, a variety of methods such as moxibustion, superficial bleeding, multiple microneedling, facial meridian massage, herbal medicine facial pack, laser acupuncture, and intense pulsed light (IPL) have been applied. Methods and Results : Pilosis, a condition of abnormal hair growth, is stated for the first time in the publication, [Pathogenesis and Manifestations of All Diseases] by Chao Yuan-fang in 610 A.D. It shows that pilosis has been recognised as a disease for ages in Asia. Reviewing several publications, we found multiple approaches to pilosis were already existed in korean medicine. They include internal medicinal classification and its' medications. Acupuncture treatments also focused on regulation of radical causes and superficial removal of abnormal hairs. Specific treatments includes body and ear acupuncture, ear acupressure, hypodermic acupuncture, hypodermic acupuncture injection, laser acupuncture treatment. Physical and chemical methods of hair removal were widely invented. we resulted that significant scientific approaches to pilosis are under way in the korean medical field, and found a variety of medical treatments such as herbal medicines and dermatological methods. Conclusions : Hair removal treatments for pilosis in traditional medicine has a long history. Combined with advanced modern technology it can achieve greater advance in cosmetology.