• Plant Journal
• /
• v.12 no.4
• /
• pp.37-43
• /
• 2016

Power system which provides electricity to the accident mitigation load for nuclear power plant should be verified to maintain the proper voltage level under the various loading and source conditions. For this purpose, it was needed to collect the voltage data of safety related buses during operation of the Reactor Coolant Pump(RCP) motor and Component Cooling Water Pump(CCWP) motor, respectively, under the certain loading condition of the plant. The data (such as, voltage, current, power factor) collected from actual measurement were used to modify the existing ETAP model and then the reanalysis was conducted to simulate the testing conditions. Through these actual measurement and analysis, it ensures that the existing electrical system analysis including assumptions and methods was conducted properly. Finally, the voltage of safety related buses was not dropped below the acceptable level, and the discrepancy between two results was within the limit.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.2
• /
• pp.110-117
• /
• 2014

Recently microalgae have been proposed as a promising biodiesel feedstock, owing to their higher lipid productivity and non-arable land based cultivation system. Biomass and lipid productivities of microalgae are largely affected by various environmental and nutritional factors. In this study, the effects of nitrogen (nitrate and ammonium) and organic carbon (glucose and glycerol) sources on the cell growth and lipid production of Chlorella sp. KR-1 were examined in flask cultures. Under autotrophic culture conditions for 15 days, overall cell growth and lipid (fatty acid methyl ester, FAME) production with nitrate were better than those of ammonium, resulting in 1.06 g cell/L and 333 mg FAME/L, respectively. Maximal intracellular lipid contents (348 - 352 mg FAME/g cell) were observed at low concentrations of 1 mM for both nitrate and ammonium. In the supply of light, addition of glucose in the range of 1 - 20 g/L showed higher cell densities than the autotrophic cell growth condition. Higher lipid accumulation of 375 mg FAME/g cell could achieved at 5 g glucose/L albeit of relatively short incubation of 7 days. With glycerol, intracellular lipid contents were ~1.9 times lower than glucose cases although similar cell growths were observed for both carbon sources.

• Korean Journal of Microbiology
• /
• v.6 no.4
• /
• pp.113-121
• /
• 1968

This study has been aimed to determine the ecological factors with relationship to the Jongkok production in view of fermentation technology by means of some strains, Asp. kawachii, which is now preserved by the author and the following factors are included during the study; inorganic salts, nitrogen, sugar, water contents and temperature. The results, are as follows: (a) Sugar among other above-mentioned factors is increasingly affecting the number of the short type of conidiophore on culture medium and the conidiophore is increased by direct ratio until glucose concentration of 50%, at which concentration is mostly effective for the short type of conidiophore, while other factors did not affect on it. (b) Until glucose concentration of 50% sugar component of culture medium is favorable for the spore formation of Asp. kawachii by direct ratio. And peptone or asparagine on nitrogen medium, calcium-phosphate among other inorganic salts, wheat bran and rice branare also favorable, but other factors rientioned earlier show no relationship with the spore formation. Sugar, however, also related with the spore color clearness of crimson and light brown, and spore color is mostly clear at the point of glucose concentration until 50%. And asparagine on nitrogen medium, calcium phosphate among other inorganic salts, rice bran did all affect on the color clearness, while other factors did not concern with color clearness. (c) Water, sugar and temperature have related with the acid formation which is promoted, by direct ratio at the point of water-saturated condition and glucose concentration of 50%, while temperature at $25^{\circ}C$favorably affected on the acid formation which is increased by inverse ratio at the temperature$25^{\circ}C$ to $45^{\circ}C$ And pH did not relate with the acid formation. (d) Cylindrical plate method devised by the author is mostly favorable for the preservation and isolation of culture, compared with the traditional slant medium method.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.168-174
• /
• 2001

Carbon fiber sheet(CFS) has been widely used for strengthening of the concrete building structures due to its excellent physical properties such as high strength, light weight and high durability. Bond strength or behavior, on the other hands, between carbon fiber sheet and concrete is very important in strengthening the concrete member using CFS. Therefore the bond failure mechanism between CFS and concrete should be fully verified and understood. This study is to investigate the bond strength of CFS to the concrete by the direct pull-out test and the tensile-shear test. In the direct pull-out tests, the bond strength under the various environmental conditions such as curing temperature, surface condition on concrete and water content of concrete are evaluated. Also, the effective bond length, lu and the average bond stress, $\tau$y are examined in the tensile-shear tests. Based on the test results, it is concluded that the curing temperature is the most critical element for the bond strength between CFS and concrete. And, the proper value of lu and $\tau$y is recommended with 15 cm and 9.78∼ 11.88 kgf/$\textrm{cm}^2$ respectively.

• The Korean Journal of Ecology
• /
• v.28 no.2
• /
• pp.79-83
• /
• 2005

We investigated the species richness of macrolepidoptera (including pyralid moths) in the evergreen broad-leaved forests of southwestern coast of Korea. The studied site was Mt. Duryunsan and its neighboring area, Haenam-gun, Jollanam-do and moths were identified and analyzed after collecting them with UV light traps from 2001 to 2004. A total number of species comprised 18 families and 489 species. We expected that the number of species would be increased when the species of microlepidoptera and butterflies were included. The family Noctuidae with 181 species was dominant in the area followed by Geometridae with 129 species and Pyralidae with 72 species. Based on number of collected individuals, Geometridae was the highest and followed by Noctuidae, Pyralidae and Drepanidae. Fifty-one percent of the total species consisted of less than two specimens in the collected sample. Monthly changes of numbers of species and individuals were examined and indices of Simpson's heterogeneity and evenness were also drawn. We briefly discussed the possibility of moth species or group of species as bioindicator for assessing the condition of forest after disturbance.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.

• Archives of design research
• /
• v.15 no.3
• /
• pp.83-92
• /
• 2002

In the 21st century, as localization is reinterpreted as an important part of globalism and as local culture is recognized as a device to increase the competitive power, every city is trying to develop its identity and improve its image while coping with change of the international and domestic environment. Therefore, basic research was preformed to establish the city image identity of Gwangju and as a result, an ideological slogan " City of Light and Life, Gwangju" and basic factors were developed. This study aims to analyze the condition of the city, focusing on design factors that the city image is comprised of, and establishes a long-term strategy for urban environment development by considering the developmental potential of the city. and focuses on case studies for establishment of an image suitable for Gwangju. Case studies focusing on the urban environmental development were presented and the results were applied to Gwangju. From the results, further studies can be pursued according to a long-term strategy. strategy.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.108.2-108.2
• /
• 2012

Recent results from microlensing surveys show that a free-floating planet or a wide-separation planet is more numerous than a main-sequence star in the Galaxy. Moreover, the detection efficiency of the planets will be improved in next-generation experiments with a high survey monitoring frequency. However, microlensing events produced by both planets appear similar light curves with a short duration timescale, thus it is difficult to distinguish them. In this paper, we investigated the detectable separation range of a wide-separation planet as the planet bound to its host star. We construct the fractional deviation maps using the magnifications of the planetary lensing and the single-lensing by planet itself for various parameters such as a mass ratio, separation, and source radius. As a result, we found that the pattern of the fractional deviation is related to the ratio of source radius to caustic size, and the ratio satisfying the detection criterion (i.e., ${\geq}5%$ in the fractional deviation) varies with a separation. Hence, we derived a fitting formula as the function of a mass ratio and a source radius to reflect the variation in the calculations of the detectable separation range of a wide-separation planet as the planet bound to its host star. In addition, we estimated the condition that a wide-separation planet can be detected as a single-lensing event under the finite source effect. We found that such a case is possible provided that the source radius is smaller than ~2.5 times of Einstein ring radius of a planet, regardless of a separation or a mass ratio.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.161-167
• /
• 2017

This paper presents an effective PPG measurement device in a wrist watch for smart healthcare. PPG can be acquired by measuring absorption of light and PPG measurement device is classified as transmission and reflection type. Reflection type is easy to implement but vulnerable to motion artifact. Moreover, reflection type must use 2 hands at once if the device is implemeted in a wrist watch. This paper describes the implementation of robust transmission type PPG measurement device by using previous developed reflection type device. PPG sensor is clip type and can be separated from the device so that the influence of motion artifact can be reduced. The proposed device can transmit the measured signal in real-time and is useful for smart healthcare. For evaluation of the proposed device, PPG signals are compared with reflection type in the same condition. The results show that the proposed device has 20% improvement in performance.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.12-17
• /
• 2013

Considering the wind power system and the rotor blades which are composed of much technology, the wind power blade would be the most dangerous part because it revolves at high speed and weighs about dozens of tons, if the accident happens. Therefore, the light weight composite materials have been replacing as substitutional materials. The object of this study is to examine the delamination and damage for CFRP/GFRP hybrid composite that is used for strength improvement of a wind power blade. The influence of the initial crack length and fiber orientation for the interlaminar delamination was exposed for the blade safety. Plain woven CFRP instead of GFRP was inserted into the layer of the box spar for improving the strength and blade life. DCB(Double Cantilever Beam) specimen was used for evaluating fracture toughness and damage evaluation of interlaminar delamination. The material used in the experiment is a commercial material known as CF 3327 EPC in plain woven carbon prepreg(Hankuk Carbon Co.) and UD glass fiber prepreg(Hyundai Fiber Co.). From the results, crack growth rate is not so different according to the variation of the initial crack length. Mode I interlamainar fracture toughness of fiber direction $0^{\circ}$ is higher than that of $45^{\circ}$. Interlaminar fracture has an effect on fiber direction and K decreased with lower value according to increasing initial crack length. Also energy release rate fracture toughness was evaluated because CFRP/GFRP hybrid composite with a different thickness is under the mixed mode loading condition. The interlaminar fracture was almost governed by mode I fracture even though the mixed mode.