• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.160-164
• /
• 1999

Algicidal activities of Alteromonas sp. SR-14 against Chaetoceros calcitrans were investigated at various culture conditions. The algicidal activity by Alteromonas sp. SK-14 was dependent on temperature. In mixed culture of C, calcitrans and Alteromonas sp. SR-14 at various temperatures, the algicidal activity of Alteronzonas sp. SR-14 was the highest at $20^{\circ}C$, but not showed algicidal activity above $25^{\circ}C$. With the inoculation of $10^4$ cells/ml of C. calcitrans, the diatom could not grow at the microalgal culture condition until 15 days by the simultaneous inoculation of less than 10 cells/ml of Alteromonas sp. SR-14. Alteromonas sp. SR-14 showed the strongest algicidal activity against logarithmic phase cells of C. calcitrans. During the mixed culture of C. calcitrans and Alteromonas sp. SR-14, supplementation of Conwy medium nutrients, changes of light intensity with 1,300$\~$4,600 lux and agitation with 200 rpm did not affect the algicidal activity.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.106-120
• /
• 1991

The main purpose of this study was to investigate the possibility of obstruction of dentinal tubules through irradiation of the $CO_2$ laser on the dentin surface. For this study, 104 extracted caries - free premolars and molars were grinded their mesial or distal surface to expose dentin completly. And these specimens were divided into three Groups. Group I : those with their smear layer not removed and Group IT : those with their smear layer removed, were irradiated by the $CO_2$ laser(SPACE LASER - $CO_2$ VEGA 25) at five different energy levels ranging 4 - 20J/$cm^2$, and all specimens were observed with scanning eletron microscope (Hitachi S - 450). Group m was divided into 2 sub - groups: one with smear layer, another one without and those were irradiated with $CO_2$ laser of the same condition as Group I & II. All specimens were immersed in, $37^{\circ}C$, 0.5% methylene blue solution for 48 hours after 100 times of thermocycling at $4^{\circ}C$ and $60^{\circ}C$, and were observed with stereo -light microscope (Olympus SZH - ILLD) to evaluate dye penetration. The following results were obtained; 1. The dentinal tubules were obstructed through laser irradiation. 2. The dentinal tubules were still obstructed after treatment of 10% HCl/2sec., then it was proved that acid resistance of detin surface was also increased. 3. The Group of laser irradiation showed less dye penetration than control Group. 4. The smear layer hardly affected obstruction of the dentinal tubules through laser irradiation.

• Korean Journal of Child Studies
• /
• v.2
• /
• pp.55-66
• /
• 1981

Research on children should be perferably made in reference with the past thinking if it is to be affirmed by the present and to predict the future. In this respect, Buddhism, which is one of the major original thinkings in the Orient as well as the most influential religion upon Koreans daily lives and attitudes, deserves to be researched in the light of education of children. In this thesis, I have made a trial to delve into the original Buddhistic scriptures to find out Buddha's outlook on home children and arrived at the following conclusions: 1. Concerning human development stages, Buddha regarded the starting point of human life from fertilization instead of birth, even at that ancient time, and the fetal life was devided into 4, 5, or 8 stages. 2. In spite of the numerous scriptures by Buddha, very little is written about children, and even these teaching did not regard the child as an independent entity. In addition, since Buddha was a person of superior enlightenment, he did not regard the age of human beings as of great importance. 3. On the relationship between parents and children, Buddha warned the extra ordinary attachment of parents toward children, because such attachment would be an obstacle in the search of truth. This idea was originated from his thought that the relationship between parents and children was not a single fixed one but of unlimited variation through numerous life times of reincarnation. This idea gives some illumination upon the problems of today's education where parent's exclusive attachment to their children and over-protection are hindrance for successful education. 4. Buddha put emphasis on parents' social duty, by which he meant that parents should care and accept not only their biological children but all children and all living things as if they were their own children. 5. Regardeding the children's role to their parents, Buddha taught that children should respect and support their parents under any condition. Buddha also emphasized that true filial piety was to help parents to improve their religious status by helping them attain the truth, morality, and wisdom. It is my intention to investigate Buddha's View tin children of entering pristhood.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1479-1484
• /
• 2010

Photosynthesis uses light energy to drive the oxidation of water at an oxygen-evolving catalytic site within photosystem II (PSII). Chlorophyll binding by the photosystem II subunit S protein, PsbS, was found to be necessary for energy-dependent quenching (qE), the major energy-dependent component of non-photochemical quenching (NPQ) in Arabidopsis thaliana. It is proposed that PsbS acts as a trigger of the conformational change that leads to the establishment of nonphotochemical quenching. However, the exact structure and function of PsbS in PSII are still unknown. Here, we clone and express the recombinant PsbS gene from Arabidopsis thaliana in E. coli and purify the resulting homogeneous protein. We used various biochemical and biophysical techniques to elucidate PsbS structure and function, including circular dichroism (CD), fluorescence, and DSC. The protein shows optimal stability at $4^{\circ}C$ and pH 7.5. The CD spectra of PsbS show that the conformational changes of the protein were strongly dependent on pH conditions. The CD curve for PsbS at pH 10.5 curve had the deepest negative peak and the peak of PsbS at pH 4.5 was the least negative. The fluorescence emission spectrum of the purified PsbS protein was also measured, and the ${\lambda}_{max}$ was found to be at 328 nm. PsbS revealed some structural changes under varying temperature and oxygen gas condition.

• Composites Research
• /
• v.26 no.2
• /
• pp.105-110
• /
• 2013

In this study, we suggest the new floating PV generation structure which is improved the structural and economical efficiency compared with the system developed in the previous research. Pultruded FRP has superior physical and chemical material properties compared with those of conventional structural materials. Especially, pultruded FRP has an excellent corrosion-resistance, light-weight, and it also has high specific strength and stiffness which are highly appreciated for the design and fabrication of floating PV generation structure under harsh environmental condition. In this study, structural analysis using the finite element method has been performed to investigate the safety of new floating PV generation structure and newly applied structural members.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.15-15
• /
• 1995

ABA and SA showed different effect on stomatal closing on same condition. The addition of 1 M salicylic acid to fully opened stomata resulted in a significant reductionn of 22 % in stomatal aperture. However, 1 mM ABA reduced 73 % of stomatal aperture. The light absorption spectra of the salicylic acid solution showed that SA was degraded within 1 hour. Therefore, SA solution was resupplied % the detached epidermis every 30 min. during incubation and it was found that even at 10 $mu$M SA induced stomatal closing significantly. Its effect was also greatly pH dependent. The reduction of stomatal aperture caused by 1 mM SA was most effective at lower pH (pH 7.2, 5 %: pH 6.2, 40 %; pH 5.2, 78 %). Therefore, if SA was properly treated to the epidermal strips in the medium, the effects of SA on stomatal closing were similar with those of ABA.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.317-321
• /
• 1995

ABA and SA showed different effect on stomatal closing on same condition. The addition of 1 M salicylic acid to fully opened stomata resulted in a significant reductionn of 22 % in stomatal aperture. However, 1 mM ABA reduced 73 % of stomatal aperture. The light absorption spectra of the salicylic acid solution showed that SA was degraded within 1 hour. Therefore, SA solution was resupplied % the detached epidermis every 30 min. during incubation and it was found that even at 10 $\mu$M SA induced stomatal closing significantly. Its effect was also greatly pH dependent. The reduction of stomatal aperture caused by 1 mM SA was most effective at lower pH (pH 7.2, 5 %: pH 6.2, 40 %; pH 5.2, 78 %). Therefore, if SA was properly treated to the epidermal strips in the medium, the effects of SA on stomatal closing were similar with those of ABA.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.286-290
• /
• 2016

Background: Activation of air and water in the electron linear accelerator for medical use has not been considered severely. By the new Japanese regulation for protection of radiation hazard, it became indispensable to evaluate of activation of air and water in the accelerator room. The measurement of induced activity in air and water components in the electron energy region of 10 to 20 MeV is very difficult, because this energy region is close to the threshold energy region of photonuclear reactions. Then, we measured the photonuclear reaction yields of $^{13}N$, $^{15}O$, and $^{11}C$ by using the electron linear accelerator. Obtained data were compared with the data calculated by the Monte Carlo method. Materials and Methods: An activation experiment was performed at the Research Center for Electron Photon Science, Tohoku University. Highly purified $SiO_2$, $Si_3N_4$, and carbon disks were irradiated for 10 minutes by bremsstrahlung converted by a tungsten plate. Induced activity from C, N, and O was obtained. Monte Carlo calculation was performed using MCNP5 and AERY (DCHAIN-SP) to simulate the experimental condition. Cross section data were adopted the KAERI dataset. Results and Discussion: In our experiment in hospital, calculated values were not agreed with experimental values. It might be three possible reasons as the cause of this deference, such as irradiation energy, calculation procedure and cross section data. Obtained data of this work, calculated and experimental values were good agreement with each other within one order. In this work, we used KAERI dataset of photonuclear reaction instead of JENDL. Therefore, it was found that the photonuclear cross section data of light elements are most important for yield calculation in these reactions. Conclusion: Further improvement for calculation using a new dataset JENDL/PD-2015 and considering electron energy spreading will be needed.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.319-325
• /
• 2020

In this paper, a discontinuous-conduction mode (DCM) DC-DC buck converter is presented for mobile device applications. The buck converter consists of compensator for stable operations, pulse-width modulation (PWM) logic, and power switches. In order to achieve small hardware form-factor, the number of off-chip components should be kept to be minimum, which can be realized with simple and efficient frequency compensation and digital soft start-up circuits. Burst-mode operation is included for preventing the efficiency from degrading under very light load condition. The DCM DC-DC buck converter is fabricated with 0.18-um BCDMOS process. Programmable output with external resistors is typically set to be 1.8V for the input voltage between 2.8 and 5.0V. With a switching frequency of 1MHz, measured maximum efficiency is 92.6% for a load current of 100mA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.425-430
• /
• 2009

$ZrO_2$ film was deposited by facing target sputtering (FTS) system on polyethylene naphthalate (PEN) substrate as a gas barrier layer for flexible organic light emitting devices (FOLEDs), In order to control the heat of the FTS system caused by the ion bombardment in the cathode compared with the conventional sputtering system, the process characteristics of the FTS apparatus are investigated under various sputtering conditions such as the distance between two targets ($d_{TT}$), the distance between the target and the substrate ($d_{TS}$), and the deposition time. The $ZrO_2$ film by the FTS system can reduce the damage on the films because the ion bombardment with high-energy particles like gamma-electrons, Moreover, the $ZrO_2$ film with optimized condition ($d_{TT}$=140 mm) as a function of the distance from center to edge showed a very uniform thickness below 5 % for a deposition time of 3 hours, which can improve the interface property between the anode and the plastics substrate for flexible displays, It is concluded that the $ZrO_2$ film prepared by the FTS system can be applied as a gas barrier layer or an interlayer between the anode and the plastic substrate with good properties of an uniform thickness and a low deposition-temperature.