• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.265-270
• /
• 2016

The ellipso-microscopic observation of a titanium surface undergoing anodization in $0.05mol\;dm^{-3}$ of $H_2SO_4$ was conducted. During irradiation by ultra-violet (UV) light with a wavelength of 325 nm, the titanium surface allowed for the flow of a photo-induced current and showed up as a bright, patch-like image on an ellipso-microscopic view. The brightness and patch-pattern in the image changed with flowing photo-induced current. The changes in the brightness and the image corresponded to the formation and/or degradation of titanium oxide due to the photo-electrochemical reaction of the oxide. An in situ monitoring using the ellipso-microscope revealed that the film change was dependent on the irradiation light power, by UV-light increases the anodic current and results in the initiation of pitting at lower potentials as compared with the non-irradiated condition.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.622-626
• /
• 2003

We report the electrical properties of organic light emitting diodes (OLEDs) depending on the crystal structure of hole injection layer of copper(II)-phthalocyanine(CuPc) and the light irradiation the carrier mobility of copper(II)-phthalocyanine(CuPc) of light source. OLEDs were constructed with indium tin oxide(ITO)/CuPc/triphenyl-diamin(TPD)/tris-(8-hydroxyquinoline)aluminum(Alq$_3$)/Al.Photocurrent multiplication of OLEDs was varied by the heat-treatment condition of CuPc thin film and the light irradiation.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode)는 저 전력, 긴 수명, 고 휘도, 빠른 응답, 친환경적 특성으로 인해 조명, 디스플레이 등 여러 분야에 사용되고 있다. 백색광 발광다이오드 구현 방식에는 대표적으로 청색 LED 칩과 황색 형광체를 조합하여 백색광을 방출하는 유형이 사용 편리성, 경제성, 효율성 측면에서 LED 백라이트 유닛 및 LED 조명 제조에 가장 적합한 것으로 연구되어 실제 적용되고 있다. 백색광 구현 LED 칩 패키징 공정에서 청색 LED 칩에 황색 형광체에 실리콘을 혼합한 형광봉 지재를 토출하는 공정은 중요한 공정이다. 따라서 본 연구에서는 조명용 백색 LED 제조 공정에서 실리콘 봉지재를 토출하기 위하여 정전기력 방식과 보이스코일 모터를 이용하여 EHD 펌프 시스템을 개발하였다. 이를 위하여 인가전압 및 시간에 따른 유체곡면 형상을 확인하기 위하여 기초 토출 실험을 통해 최적의 토출 조건이 결정하였고 또한 검증을 위하여 실험계획법을 사용하였다. 검증된 토출 조건의 균일도를 확인하기 위하여 반복 토출 실험을 수행하였다.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1005-1013
• /
• 2008

This paper describes a new sensor system for 3D range measurement using the structured infrared light. Environment and obstacle sensing is the key issue for mobile robot localization and navigation. Laser scanners and infrared scanners cover $180^{\circ}$ and are accurate but too expensive. Those sensors use rotating light beams so that the range measurements are constrained on a plane. 3D measurements are much more useful in many ways for obstacle detection, map building and localization. Stereo vision is very common way of getting the depth information of 3D environment. However, it requires that the correspondence should be clearly identified and it also heavily depends on the light condition of the environment. Instead of using stereo camera, monocular camera and the projected infrared light are used in order to reduce the effects of the ambient light while getting 3D depth map. Modeling of the projected light pattern enabled precise estimation of the range. Identification of the cells from the pattern is the key issue in the proposed method. Several methods of correctly identifying the cells are discussed and verified with experiments.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.249-255
• /
• 2017

Efficient operation of induction motor at light loads has been getting wide attention recently because the operating of induction motor at light loads occupies big portion of its operating regions in many applications such as environment friendly vehicle. As one of approaches to improve efficiency, Adaptive Maximum Torque Per Amp (Adaptive MTPA) control for induction motor drives has been proposed to achieve a desired torque with the minimum possible stator current. However, the Adaptive MTPA control was validated only at heavy load where, in general, control scheme tends to perform better than at light loads since the error in measurement of sensors is lower and signal to noise is better. Thus, although the performance of a control scheme is good at rated operating point, its performance at light load is somewhat in doubt in practice. This has led to considerable interest in efficiency of Adaptive MTPA control at light loads. This work experimentally demonstrates performance of Adaptive MTPA control at light loads regardless of rotor resistance variation, thus showing its good performance over all operating conditions.

• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.906-912
• /
• 2011

본 논문에서는 건물에 산재되어 있는 비상등을 효과적으로 관리하기 위하여 별도의 통신선을 포설하지 않고 지능형 클러스터 감시망을 구성한다. 또한, 비상등의 위치에 구애받음 없이 감시장치를 설치할 수 있고, 감시망을 구성함에 있어 게이트웨이로 지정된 감시장치가 고장나더라도 사각지대 없이 비상등의 상태를 감시 및 관리가 가능하며, 비상등을 항시 점검 및 관리할 수 있는 비상등감시장치와 비상등관리시스템을 구현하였다. 실험결과, 구현 시스템은 설계 규격대로 동작하였고, 감시망 구성, 상태정보 측정 및 초기화가 안정적으로 구성됨을 확인하였다.

• Journal of Plant Biotechnology
• /
• 제32권4호
• /
• pp.307-311
• /
• 2005

자색고구마의 캘러스 배양에서 광의 조사가 안토시아닌 생합성에 미치는 효과를 실험하였다. 잎조직으로부터 자색캘러스는 $0.5\;{\mu}M$ 2,4-D가 첨가된 MS배지, 광조건에서 유도되었다. 광의 세기에 따른 효과는 암 조건에 비교하여 광조건에서 안토시아닌 생합성이 $2{\sim}3$배에 이르는 것으로 나타났으며, 약광 (3000 lux)에서 안토시아닌 생합성량이 높게 나타났다. 이러한 광 조사에 의한 안토시아닌 생합성의 촉진효과는 LED를 이용하며 실험한 결과에서 청색광을 2시간 처리한 경우 3000 lux의 백색광을 처리한 대구조에 비교하여 1.4배의 안토시아닌 생합성 향상효과를 나타냈다.

• 한국분무공학회지
• /
• 제18권3호
• /
• pp.155-160
• /
• 2013

Worldwide harmonized light-duty vehicle test procedure (WLTP) for emission certification has been developed in WP.29 forum in UN ECE since 2007. The test procedure is expected to be applied to Korean light-duty diesel vehicles at the same time of adoption in Europe. The air pollutant emissions from light-duty vehicles have been regulated with weight per distance travelled which means the driving cycles can affect the results. The six Euro-5 light-duty diesel vehicles including sedan, SUV and truck have been tested with WLTP, NEDC which is used for emission certification for light-duty diesel vehicles, and CVS-75 to estimate how much particle number emission can be affected by different driving cycles. The averaged particle number emissions have not shown statistically meaningful difference. The maximum particle number emission have been found in Low speed phase of WLTP which is mainly caused by cooled engine conditions. The amount of particle number emission in cooled engine condition is much different as test vehicles. It means different technical solution is required in this aspect to cope with WLTP driving cycle.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.1-8
• /
• 2012

In this paper, we improved the light extraction efficiency by structural change of LEDs on conventional LEDs. We simulated the LEDs light emission as functions of LED side wall angle, various refractive indices the geometrical structures and analyzed the condition improved the light efficiency. We present the results of experimerns and simulations for light output power from LEDs for various refractive indices and the geometrical structures of the LED encapsulants. When the side wall angle range was from 40[$^{\circ}$] to 30[$^{\circ}$], the LED emission increased. LED side wall angle onto LED using the simulation system with a fine tuning of the structure of the LEDs side wall angle is fabricated. Additionally, we changed the side wall angle of LED package with spherical structure and flat structure. The result of spherical structure ray tracting is higher compared with flat structure about 14[%].

• ALGAE
• /
• 제32권3호
• /
• pp.235-244
• /
• 2017

Freshwater algae living in shallow waters have evolved various photomovement to stay in the optimum light condition for survival. Previous action-spectra investigations showed that Spirogyra filaments have phototropic movement in blue light. To decipher the genetic control of phototropic movement, two phototropin homologues were isolated from Spirogyra varians, and named SvphotA and SvphotB. Both phototropins have similar molecular structure consisted of two light-oxygen-voltage domains (LOV1, LOV2) and a serine / threonine kinase domain. SvphotA and SvphotB had 48.7% sequence identity. Phylogenetic analysis showed SvphotA and SvphotB belong to different clades suggesting early divergence, possibly before the divergence of land plants from the Zygnematales. Quantitative PCR and northern blot analysis showed that SvphotA and SvphotB responded differently to red and blue light. SvphotA was consistently expressed in the dark and in blue light, while SvphotB was expressed only when the plants were exposed to light. When the filaments were exposed to red light, SvphotA was significantly downregulated whereas SvphotB was highly upregulated. These results suggest that the two phototropins may have different roles in the photoresponse in S. varians.