• Title/Summary/Keyword: Light - leakage

Search Result 260, Processing Time 0.03 seconds

Sinapine 누출정도에 따른 무(Raphanus sativus L.) 종자의 발아율과 종자 및 유묘의 외형적 차이 (Relationship Between Sinapine Leakage Degrees of Radish Seeds and Germination and Morphological Differences of the Seeds and Seedlings)

  • 민태기;백준호;김복진
    • Applied Biological Chemistry
    • /
    • 제40권3호
    • /
    • pp.238-242
    • /
    • 1997
  • 5개 무 품종의 종자를 3시간 물에 침지한 후 cellulose 분말을 코팅하여 UV 광하에서 sinapine 누출정도에 따른 형광색의 분포정도에 따라 무형광(NF)종자, 일부형광(PF)종자, 완전형광(FF)종자로 구분하고, 또 이들 종자와 발아한 유묘의 외부형태를 주사전자현미경(SEM), 광학현미경 및 육안으로 관찰하였다. 종자의 발아율은 무형광(NF)종자>일부형광(PF)종자>완전형광(FF)종자 순으로 낮았으며, 무형광(NF)종자는 종피조직이 치밀하고 둥근 모양이었으나, 일부형광(PF) 및 완전형광(FF)종자는 종피가 주름지거나 상처가 있는 것이 대부분이었다. 또 무형광(NF)종자에서 나온 유묘의 떡잎과 배축은 정상이었으나, 일부형광(PF) 및 완전형광(FF)종자에서 나온 유묘의 떡잎에는 조직이 괴사한 흔적이 많았으며 떡잎과 배축의 크기가 작고 비정상적이었다.

  • PDF

Micro-CT evaluation of internal adaptation in resin fillings with different dentin adhesives

  • Han, Seung-Hoon;Park, Sung-Ho
    • Restorative Dentistry and Endodontics
    • /
    • 제39권1호
    • /
    • pp.24-31
    • /
    • 2014
  • Objectives: The purpose of present study was to evaluate the internal adaptation of composite restorations using different adhesive systems. Materials and Methods: Typical class I cavities were prepared in 32 human third molars. The teeth were divided into the following four groups: 3-step etch-and-rinse, 2-step etch-and-rinse, 2-step self-etch and 1-step self-etch system were used. After the dentin adhesives were applied, composite resins were filled and light-cured in two layers. Then, silver nitrate solution was infiltrated, and all of the samples were scanned by micro-CT before and after thermo-mechanical load cycling. For each image, the length to which silver nitrate infiltrated, as a percentage of the whole pulpal floor length, was calculated (%SP). To evaluate the internal adaptation using conventional method, the samples were cut into 3 pieces by two sectioning at an interval of 1 mm in the middle of the cavity and they were dyed with Rhodamine-B. The cross sections of the specimens were examined by stereomicroscope. The lengths of the parts where actual leakage was shown were measured and calculated as a percentage of real leakage (%RP). The values for %SP and %RP were compared. Results: After thermo-mechanical loading, all specimens showed significantly increased %SP compared to before thermo-mechanical loading and 1-step self-etch system had the highest %SP (p < 0.05). There was a tendency for %SP and %RP to show similar microleakage percentage depending on its sectioning. Conclusions: After thermo-mechanical load cycling, there were differences in internal adaptation among the groups using different adhesive systems.

압전 변압기를 이용한 인버터식 네온관용 변압기에 관한 연구 (A Study on the Inverter Type Neon Power Supply Using a Piezoelectric Transformer)

  • 변재영;김윤호
    • 전력전자학회논문지
    • /
    • 제8권6호
    • /
    • pp.504-511
    • /
    • 2003
  • 본 연구에서는 네온 변압기를 세라믹 계열의 압전 변압기를 이용한 인버터식 네온관용 변압기를 제안하였다 인버터식 네온관용 압전 변압기의 주요 구성은 정류부, 발진부, 공진형 하프브릿지 인버터회로부 및 압전 변압기부로 구성 제작하였다. 네온관용 변압기는 지금까지 개발된 압전 변압기 용량 보다 대부분 큰 용량을 필요로 하고 있기 때문에 압전 변압기의 용량 증가를 위해 병렬 구동하였다 이때 병렬로 연결된 단층형 압전 변압기간 내부 임피던스 값의 불일치로 발생하는 불평형 전류를 최소화 하기 위하여 압전 변압기별로 LC 필터값을 분석 부착하여 전압의 왜곡율을 최소화 하여 안정된 정현파 출력을 구현하였다. 그리고 이를 컴퓨터 시뮬레이션 실험과 실제 네온관 부착 실험을 통하여 전력 밀도와 절연 레벨이 높고, 누설 자속이 없는 소형, 경량화된, 압전 변압기를 적용한 인버터식 네온관용 변압기가 기존의 자기식 네온관용 변압기 보다 우수함을 비교 입증하였다.

유기발광다이오드(OLED) 소재 제조 현장 여과 설비사용 위험성 및 개선 방안 연구 (A study on the Risks of Using Filtration Facilities at the Organic Light Emitting Diode(OLED) and Its Preventive Measures)

  • 곽종구;강찬규
    • 한국가스학회지
    • /
    • 제27권4호
    • /
    • pp.1-11
    • /
    • 2023
  • OLED 소재 시장의 규모는 2019년 11억 달러에서 2023년 23억 달러로 연평균 19% 이상 지속적인 성장이 예상된다. OLED 소재 제조사에서 주로 사용하고 있는 설비 중 여과 설비는 사용 시 화재, 폭발, 누출 등의 사고들이 빈번히 발생하고 있어, 이에 대한 여과 설비사용 시의 위험성 개선이 요구된다. 해당 연구에서는 여과 설비사용에 따른 위험성을 도출하기 위해 주요공정 즉 조립 및 분해공정, 여과공정, wet cake 회수공정, 세척공정의 4가지로 나누어 사고사례조사, 사전인터뷰, 설문조사 등을 실시하여 유해 위험 요인을 도출하였다. 설문 결과의 분석은 SPSS 21을 이용하여 빈도분석, Pearson 카이제곱 검정 분석을 수행하여 분석된 결과를 활용하여 위험성 개선 방안들을 제시하였다. 이 연구가 OLED 시장 규모가 확대됨에 따라 발생할 수 있는 안전 및 위험 요인들을 다루는데 기초자료가 될 것으로 기대한다.

형광체 기반 X선 광 변조기를 위한 비정질 셀레늄 필름 특성 (Characterization of the a-Se Film for Phosphor based X-ray light Modulator)

  • 강상식;박지군;조성호;차병열;신정욱;이건환;문치웅;남상희
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권2호
    • /
    • pp.306-309
    • /
    • 2007
  • PXLM(Phosphor based x-ray light modulator) has a combined structure by phosphor, photoconductor, and liquid crystal and it can realize x-ray image of high resolution in clinical diagnosis area. In this study, we fabricated a photoconductor and investigated electrical and optical properties to confirm application possibility of radiator detector of PXLM structure. As photoconductor, amorphous selenium(a-Se), which is used most in DR(Digital radiography) of direct conversion method, was used and for formation of thin film, it was formed as $20{\mu}m-thick$ by using thermal vacuum evaporation system. For a produced a-Se film, through XRD(X-ray diffraction) and SEM(Scanning electron microscope), we investigated that amorphous structure was uniformly established and through optical measurement, for visible light of 40 $0\sim630nm$, it had absorption efficiency of 95 % and more. After fabricated a-Se film on the top of ITP substrate, hybrid structure was manufactured through forming $Gd_2O_3:Eu$ phosphor of $270{\mu}m-thick$ on the bottom of the substrate. As the result to confirm electrical property of the manufactured hybrid structure, in the case of appling $10V/{\mu}m$, leakage current of $2.5nA/cm^2$ and x-ray sensitivity of $7.31nC/cm^2/mR$ were investigated. Finally, we manufactured PXLM structure combined with hybrid structure and liquid crystal cell of TN(Twisted nematic) mode and then, investigated T-V(Transmission vs. voltage) curve of external light source for induced x-ray energy. PXLM structure showed a similar optical response with T-V curve that common TN mode liquid crystal cell showed according to electric field increase and in appling $50\sim100V$, it showed linear transmission efficiency of $12\sim18%$. This result suggested an application possibility of PXLM structure as radiation detector.

양파의 이상 재배조건에서 생육과 저장온도에 따른 저장성 및 포장한 신선편이 특성 (Growth, Storage and Fresh-cut Characteristics of Onion (Allium cepa L.) in Unstable Environmental Condition and Storage Temperature)

  • 이정수;장민선;박수형
    • 한국포장학회지
    • /
    • 제22권3호
    • /
    • pp.143-154
    • /
    • 2016
  • 양파의 재배적 요인과 저장 조건에 따른 수확 전 후 특성을 조사하여, 이들 요인간의 상호적 관계에 대해 구명하고자 하였다. 본 연구에서는 양파 품종 이외의 수확전 재배환경과 같은 가변적 요인이 저장 특성과 가공 시에 미치는 영향을 조사하고자, '카스(Kars)' 등의 품종을 이용하여 재배기간 중의 토양 과습과 차광 처리에 의한 재배조건 차이에 따른 생육 차이를 조사하였으며, 수확후 상온($22^{\circ}C$)과 저온($0^{\circ}C$)으로 저장온도를 달리하여 저장 동안의 생체중량 감소와 호흡을 관측하였으며, 저장 후 가공 시 신선편이의 미생물 수, electrolyte leakage, 가스조성 변화 등을 관찰하였다. 양파 저장 시 수확후에 품종뿐만 아니라 수확전 재배조건과 같이 가변적인 요인이 영향을 미치는 것을 확인하였는데, 양파는 재배 시 토양 과습과 차광 처리가 생육에 영향을 미쳐 생육량이 감소하고, 세포조직은 크기가 커지고 엉성한 구조를 가지는 것으로 나타났다. 또한 본 연구의 결과를 통해 재배환경의 차이가 생육뿐만 아니라 수확후에도 영향을 미쳐 생체중량 감소 및 호흡량의 증가로 이어짐을 밝혔는데, 양파 저장 중의 토양 과습과 차광 처리 한 양파의 생체중 변화와 호흡률이 대조구보다 더 높은 것으로 나타났으며, 저장 온도에서는 저온($0^{\circ}C$)뿐만 아니라 상온($22^{\circ}C$)에서 저장한 것도 재배조건의 영향을 받는 것으로 보였다. 본 연구에서 신선편이의 보존 중 변화는 수확전 재배환경보다 저장조건이 더 영향을 미치는 것으로 나타났으나, 재배 후 저장과정을 달리한 신선편이 양파는 측정항목에 따라 영향이 다르게 보였다. 신선편이의 electrolyte leakage나 미생물 수는 재배조건 보다는 최소 가공전의 저장온도에 더 영향을 받아 저온($0^{\circ}C$) 저장한 것이 electrolyte leakage가 높고 미생물수가 많았다. 그러나 가스 조성 변화나 이취는 재배조건이나 저장온도에 따른 영향을 확인하기 어려워 보였다. 향후 신선편이에서 가공 전 영향에 대해서는 지속적인 탐색과 포장 후 품질관리를 통해 효과적인 상품성의 유지를 위한 방법을 밝힐 필요가 있을 것으로 본다. 본 연구를 통해 양파의 품종, 재배환경, 저장조건 등이 수확후나 신선편이에 미치는 영향을 구명하여, 수확전 재배 단계에서부터, 수확후 저장, 가공까지 유기적 관계가 있음을 확인할 수 있었다. 따라서 고품질의 신선한 원예산물에 대한 요구가 높아져 수확후 관리의 중요성이 강조되고 있지만, 저장 이후에도 높은 품질을 유지하기 위해서는 수확후 관리는 원물에 대한 이해를 통해 수확전 재배환경에서부터 수확후 저장기술 등이 연계되어 관리되어야 한다는 인식의 변화와 정론(定論)이 필요할 것으로 생각된다.

Cardioplegic Solution의 심근보호 효과에 관한 실험적 연구 (An Experimental Study on the Myocardial Protection Effects of the Cardioplegic Solution)

  • 이종국
    • Journal of Chest Surgery
    • /
    • 제13권4호
    • /
    • pp.321-337
    • /
    • 1980
  • The increasing use of cardioplegic solution for the reduction of ischemic tissue injury requires that all cardiplegic solution be carefully assessed for any protective or damaging properties. This study describes functional, enzymatic and structural assessment of the efficiency of three cardioplegic solutions (Young & GIK, Bretschneider, and $K^{+}$ Albumin solution) in a Modified Isolated Rat Heart Model of cardiopulmonary bypass and ischemic arrest. Isolated rat heart were subjected to a 2-minute period of coronary infusion with a cold cardioplegic or a noncardioplegic solution immediately before and also at the midpoint of a 60-minute period of hypothermic ($10{\pm}1$. C) ischemic cardiac arrest. The results of this study were as follow: 1. Spontaneous heart beat after ischemic arrest occured 16 seconds later after Langendorff reperfusion in the Young & GIK group (n=6), and 40 second later in the Bretschneider group (n=6) and 6 minute later in the $K^{+}$ Albumin group (n=6), and 16 minute later in the control group (non-cardioplegia). A good recovery state of spontaneous heart beat was shown in the Young & GIK and Bretschneider groups. 2. The percentage of recorveries of heart function at 30 minute after postischemic working heart perfusion were : heart rate $91.6{\pm}3.1$% (P<0.01)m oeaj airtuc oressyre $83{\pm}3$% (P<0.01), coronary flow $70{\pm}8$% (P<0.05) and aortic flow flow rate $39{\pm}9.3$% (P<0.05) in the Young & GIK group. This percentage of recoveries of the Young & GIK group was significantly greater than the control group. In the Bretschneider group, the percentage of recoveries were : heart rate $87.8{\pm}7.5$%(P<0.05), peak aortic pressure $71{\pm}2.3$% (P<0.05) and aortic flow rate $33.2{\pm}6.6$%(P<0.05). hte percentage of recoveries were significantly greater than in the control group. In the $K^{+}$ Albumin group, recoveries of heart function were poor. 3. Total CPK leakage was $131.2{\pm}12.75$IU/30 min/gm. dry weight in the control group, $50.65{\pm}12.75$IU in the Young & GIK gruop, $69.40{\pm}32.21$Iu in Bretschneider group, and $103.65{\pm}15.47$IU in the $K^{+}$ Albumin group during the 30 minute postischemic Langendorff reperfusion. Total CPK leakage was significantly less (P<0.001) in the Young & GIK group, than in the control group. 4. Direct correlatin between percentage recovery of aortic flow rate and total amount of CPK leakage from Myocardium was noticed.(Correlation Coefficient r = 0.76, P<0.001). 5. Mild perivascular edema was the only finding of light microscopic study of myocardium after 60 minute ischemic arrest with cold cardioplegic solutions and hypothermla.

  • PDF

전자식 수소레귤레이터 기밀성 향상을 위한 FEA 연구 (FEA(Finite Element Analysis) Study for Electronic Hydrogen Regulator of Confidentiality Improvement)

  • 손원식;송재욱;전완재;김승모
    • 한국산학기술학회논문지
    • /
    • 제20권9호
    • /
    • pp.175-181
    • /
    • 2019
  • 수소연료전지차(FCEV)의 수소연료 공급시스템에서 대용량 감압에 사용되는 기존의 1단 감압 구조 레귤레이터(Regulator)의 경우 높은 감압에 따른 맥동과 느린 응답, 수소 취성, 누설, 고중량, 고비용 등의 문제점이 있다. 이러한 문제점은 2번에 걸친 감압 메커니즘(2단 구조)을 가지는 2단 레귤레이터 개발을 통해 극복될 수 있으며, 2번째 감압시점에 전자식 솔레노이드 밸브를 적용한다면 폭넓은 출구압력의 제어가 가능하다. 이에 따라 2단 전자식 솔레노이드 밸브를 가지는 레귤레이터의 출구압력 정밀도 향상과 누설방지, 내구성, 경량화, 가격저감 등의 기술개발이 필요한 실정이다. 이중에서도 레귤레이터의 필수적인 성능인 출구압력 정밀도 향상과 누설 방지를 위해 감압 전과 감압 후의 구조부분을 나누어 각각의 초기 내압 적용 후 Valve part가 닫힌 상태(Open Ratio : 0 %)로 가정하여 해석 연구를 진행하였다. 1차감압부의 기밀성과 관련하여 Aluminum Alloy 소재의 사용은 부적절하다고 판단되었고, 서로 다른 금속으로 구성되었을 때는 응력의 변화와 함께 변위 또한 같이 증가하므로 이종 소재를 사용하는 접촉부 구성은 부적절하다고 판단되었다. 2차 감압부의 기밀성과 관련된 변위 측면에서는 Young's Modulus 값이 큰 TPU(Thermoplastic Polyurethane)를 사용하는 것이 비교적 변위량이 작으므로 적절하다고 판단하였고, 기밀성에 대한 기준으로 Case 분석을 진행한 결과 최적 형상을 설계할 수 있었다.

양에서 막형 산화기를 사용하여 심폐바이패스할 경우 백혈구격리 및 자유라디칼로 중재되는 폐손상 (Leukocyte Sequestration and Free Radical-Mediated Lung Injury in Ovine Cardiopulmonary bypass Using Membrane Oxygenator)

  • 김원곤;신윤철;서정욱
    • Journal of Chest Surgery
    • /
    • 제32권11호
    • /
    • pp.978-983
    • /
    • 1999
  • Background: Complement activation with transpulmonary leukocyte sequestration is considered a main mediator leading to ischemia-reperfusion lung(I-R) injury. We studied the role of leukocytes in the formation of I-R injury in ovine cardiopulmonary bypass(CPB) model with a membrane oxygenator. Material and Method: Five sheep were used. CPB circuitry consisted of a roller pump(American Optical Corp., Greenwich, CT, USA) and a membrane oxygenator(UNIVOX-IC, Bentley, Baxter Health Corp, Irvine, CA, USA). The CPB time was fixed at 120 min. Ten minutes after the start of CPB, total CPB was established. Thereafter a total CPB of 100 min was performed, followed by another 10 min of partial CPB. The CPB was discontinued and the animals were fully recovered. For measuring left and right atrial leukocyte counts, blood samples were taken before thoracotomy, 5 min and 109 in after the start of CPB, and 30 min and 120 min after weaning. C3a was measured before thoracotomy, 109 min after the start of CPB, and 30 min and 120 min after weaning. Plasma malondialdehyde(MDA) was checked before thoracotomy, 109 min after the start of CPB, and 30 min after weaning. One to two grams of lung tissue were taken for water content measurement before thoracotomy, 109 min after the start of CPB, and 30 min after weaning. Lung biopsy specimens were examined by light and electron microscopy. Result: Of 5 animals, 4 survived the experimental procedures. Of these, 3 animals survived on a long-term basis. No significant differences in transpulmonary gradients of leukocyte were found and no significant complement activation was expressed by C3a levels. MDA level did not show significant changes related to lung reperfusion despite an increase after the start of CPB. On both light and electron microscopic examinations, mild to moderate acute lung change was observed. Interstitial edema, leakage of erythrocytes into the alveolar space and endothelial cell swelling were the main findings. Water content of the lung showed a slight increase after the start of CPB, but there was no statistical significance. Conclusion: These findings indicate that ischemia-repersusion lung injury may not be from complement activation-leukocyte sequestration but from another source of oxygen free radicals related to CPB.

  • PDF

Effect of the Plasma-assisted Patterning of the Organic Layers on the Performance of Organic Light-emitting Diodes

  • Hong, Yong-Taek;Yang, Ji-Hoon;Kwak, Jeong-Hun;Lee, Chang-Hee
    • Journal of Information Display
    • /
    • 제10권3호
    • /
    • pp.111-116
    • /
    • 2009
  • In this paper, a plasma-assisted patterning method for the organic layers of organic light-emitting diodes (OLEDs) and its effect on the OLED performances are reported. Oxygen plasma was used to etch the organic layers, using the top electrode consisting of lithium fluoride and aluminum as an etching mask. Although the current flow at low voltages increased for the etched OLEDs, there was no significant degradation of the OLED efficiency and lifetime in comparison with the conventional OLEDs. Therefore, this method can be used to reduce the ohmic voltage drop along the common top electrodes by connecting the top electrode with highly conductive bus lines after the common organic layers on the bus lines are etched by plasma. To further analyze the current increase at low voltages, the plasma patterning effect on the OLED performance was investigated by changing the device sizes, especially in one direction, and by changing the etching depth in the vertical direction of the device. It was found that the current flow increase at low voltages was not proportional to the device sizes, indicating that the current flow increase does not come from the leakage current along the etched sides. In the etching depth experiment, the current flow at low voltages did not increase when the etching process was stopped in the middle of the hole transport layer. This means that the current flow increase at low voltages is closely related to the modification of the hole injection layer, and thus, to the modification of the interface between the hole injection layer and the bottom electrode.