• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.681-693
• /
• 2007

Construction techniques for continuous steel bridges were applied to steel-concrete double composite box girder bridges. Concrete depth and length at the bottom of the steel box in the negative moment region were determined by plastic moment region and negative moment region of the double composite section, respectively. Construction methods, such as crane lifting method, free cantilever method, and incremental launching method were used for the analysis of the construction stage. Two cases of the construction phase were considered and analyzed for the stress resultant of double composite girders. The behavior of the nose-deck elastic system was examined by three-dimensionless parameters, such as the nose length, the unit weight of the launching nose, and the flexural stiffness of the nose. The adoption of the launching nose has become an effective solution in the incremental launching of steel-concrete double composite box girder bridges.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.2
• /
• pp.140-150
• /
• 2005

Maxillary sinus lifting procedure and bone grafting are used to reconstruct atrophic maxillae. These procedure are usually followed by the placement of endosseous dental implants. Different materials and techniques can be used for sinus bone grafting. Platelets are known to contain various growth factors involved in the repair of the vasculature and tissues, and it is known that the specialized platelet secretory granules, the alpha granules, contain platelet derived growth factor(PDGF), transforming growth factor-beta(TGF-beta), insuline like growth factor-I(IGF-I), epidermoid growth factor(EGF), and others. This study was to evaluate the effect of PRP on bone formation in a sinus bone grafting. Twelve rabbits were included in this randomized, blinded, prospective pilot study. In experimental group, sinus bone grafting with autobone and platelet rich plasma. In control group, sinus bone grafting with only autobone. Rabbits were sacrificed at 2nd, 4th, 8th, 12th weeks postoperatively. Clinical and radiographic tests, histological analysis were conducted to compare both sides. In clinical examination, there in no significant difference between experimental group and control group. But, in radiographic examination, a distinct incresed in the radiopaque of the PRP experimental group at 2nd and 4th weeks. The histologic examination revealed that more new bone formation and osteoblast activity were seen in experimental group at 2nd and 4th weeks. In conclusion, PRPs action in sinus bone grafting had a capacity of increased new bone formation in a early bone healing stage.

• Journal of computational fluids engineering
• /
• v.14 no.1
• /
• pp.53-61
• /
• 2009

The objective of this research is to design blade planform to reduce high speed impulsive(HSI) noise from a non-lifting helicopter rotor using CFD method and optimization techniques. As for the aero-acoustic analysis, CFD technique for aerodynamic analysis and Kirchhoff's method for the acoustic analysis were used. As for the optimization method, Kriging-based genetic algorithm(GA) model as a high-fidelity optimization method was chosen. Design variables and constraints are determined for arbitrary blade planform. The result shows that the optimized blade planform with high swept-back and taper ratio can reduce HSI noise by suppressing generation of the strong shock wave on blade surface and propagation of the noise to the farfield flow region.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.531-536
• /
• 2013

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.4
• /
• pp.210-217
• /
• 2019

Objective: This study was conducted to compare the immediate effect of hamstring stretching techniques of static stretching, proprioceptive neuromuscular facilitation (PNF) hold-relax and PNF irradiation on the hamstring muscle. Design: Three-group pretest-posttest design. Methods: Fifty-one subjects with shortened hamstrings were randomly assigned to the static stretching group (n=17), PNF hold-relax group (n=17), and the PNF irradiation group (n=17). All subjects performed an active knee extension (AKE) test to assess for the lower extremity with a shortened hamstring. The static stretching group performed stretches by lifting their leg to the maximum extent (3 times, 30 seconds). The PNF hold-relax group performed maximal isometric contraction against the experimenter's resistance (3 times, 10 seconds). The PNF irradiation group performed maximum isometric contraction against the experimenter's resistance toward the direction of the body (5 times, 5 seconds). The pre and post-tests measured range of motion (ROM), pressure pain thresholds (PPT) and muscle tone. Results: There were significant differences in ROM and PPT between pre and post intervention in each group (p<0.05). There was a significant difference only in the ROM among groups (p<0.05). Post-hoc analysis showed that the changes in ROM occurred in the order of the PNF hold-relax group, static stretching group and PNF irradiation group (p<0.05). Conclusions: The findings of this study suggest that the PNF irradiation technique may improve ROM and may be used to improve ROM similar to other stretching techniques. Therefore, the PNF irradiation technique could be included in stretching programs and can be used as a suitable stretching method depending on the situation.

• Journal of Korean Academy of Nursing
• /
• v.46 no.1
• /
• pp.39-49
• /
• 2016

Purpose: This study was done to develop a postural-stability patient transfer technique for care helpers in nursing homes and to evaluate its effectiveness. Methods: Four types of patient transfer techniques (Lifting towards the head board of the bed, turning to the lateral position, sitting upright on the bed, transferring from wheel chair to bed) were practiced in accordance with the following three methods; Care helpers habitually used transfer methods (Method 1), patient transfer methods according to care helper standard textbooks (Method 2), and a method developed by the author ensuring postural-stability (Method 3). The care helpers' muscle activity and four joint angles were measured. The collected data were analyzed using the program SPSS Statistic 21.0. To differentiate the muscle activity and joint angle, the Friedman test was executed and the post-hoc analysis was conducted using the Wilcoxon Signed Rank test. Results: Muscle activity was significantly lower during Method 3 compared to Methods 1 and 2. In addition, the joint angle was significantly lower for the knee and shoulder joint angle while performing Method 3 compared to Methods 1 and 2. Discussion: Findings indicate that using postural-stability patient transfer techniques can contribute to the prevention of musculoskeletal disease which care helpers suffer from due to physically demanding patient care in nursing homes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.644-651
• /
• 2000

In cases of severe alveolar bony resorption in the edentulous posterior maxillae, implant placement is limited anatomically due to maxillary sinus. If the ridge is atrophic, the various bone grafting methods are required for the ridge augmentation. But the result of the onlay grafting procedure is not always promising. On the posterior maxilla, maxillary sinus mucosa lifting and bone grafting into the sinus floor, subantral augmentation(SA) technique are recommended. Various SA procedures have been developed for implant installation. We perfer to simultaneous block bone graft and implant installation through the residual alveolar ridge into the grafted block bone to fix the grafted bone and to gain the primary stability of the installed fixture. When a sagittal skeletal discrepancy in present due to the severe alveolar bony resorption of the maxilla, the advancement of the maxilla by Le Fort I osteotomy simultaneously with installation of implant fixtures combined with sinus lifting and interpositional bone graft procedure can be indicated. We applied various SA techniques for implant installtion to the 46 edentulous posterior maxillae, and total 154 implants were installed at our department from 1992 to 1999. Various SA techniques were classified in detail and the indications of each techniques were discussed. The changes of residual bony height following SA procedure were studied. The results were as follows. 1. The SA procedure combined with bone graft and simultaneous fixture installation were performed in 41 cases, 126 fixtures were installed and 5 fixtures were removed out of them. Le Fort I osteotomy procedure combined with sinus lifting and interpositional bone graft simultaneous with fixture installation were performed in 5 cases. Total 28 fixtures were installed and 2 fixtures were removed so far. 2. Autogenous block bone graft into sinus floor were performed in 35 cases, autogenous particulated marrow cancellous bone(PMCB) graft in 9 cases, and demineralized human bone powder in 2 cases. The donor site for bone graft were anterior iliac bone in 39 cases, posterior iliac bone in 3 cases and mandibular symphysis in 1 case and mandibular ramus in 1 case. 3. In 9 cases with which SA procedure had been performed with the block bone graft, the change of pre- and postoperative residual bony height were measured using MPR(multiplanar reformatted)-CT. The mean residual bony height was 8.0mm preoperatively, 20.2mm at 6 months following up operation and we gained average 12.2mm alveolar bony height. So, we can recommend this one-stage subantral augmentation and fixture installation technique as a time conserving, safe and useful method for compromised posterior edentulous maxilla.

• Journal of English Language & Literature
• /
• v.56 no.2
• /
• pp.219-236
• /
• 2010

As a poet, a reviewer of books, and an editor of a major literary journal, Marianne Moore participated in aesthetic revolution which invented the American poetry of the twentieth century. Of all the modernists, she was one of the few truly technical originals, and became an endearing mascot of poetry. Innately attentive to detail, Moore wrote a myriad of poems about animal and plant subjects, and set out to develope and secure her own particular paradigm for modernist poetic and the poetry of objective and scientific description. Foregrounding a mind scientifically trained, Moore used her verse to demonstrate a means by which to see the reality beyond the obvious. Ironically enough, however, a central difficulty with understanding Moore's poetry lies with her concern for such scientific or surface description and precision. In order to understand Moore's poetry fully, it is of special necessity to appreciate relativity among the seemingly disparate entities such as science and literature, as Moore herself did. This paper explores the way in which the poetic techniques of Moore substantiate her sense of morality that underlies the creation of her poetry. Rather than merely addressing her artistic genius or craftsmanship as a modernist poet, Moore's methods engage the power of imagination, magic, lifting the human spirit and eschewing anthropocentric perspectives. For Moore, the poet's magic comes by diligence. In so doing, as I would argue here, Moore draws on the nature of language, especially what Bakhtin insisted with his notions of polyphony and carnival. By introducing openness to various perspectives and meanings in her verse, Moore succeeds in maintaining her own sense of creativity while continuing to acknowledge morality. In a similar skein, her use of active verbs in animal poems and the kaleidoscopic descriptions demonstrate how Moore accommodates imagination and reality, and form and content.

• Archives of Plastic Surgery
• /
• v.42 no.5
• /
• pp.521-531
• /
• 2015

Facial rejuvenation procedures can be roughly divided into face lift surgery and nonoperative, less invasive procedures, such as fat grafts, fillers, botulinum toxin injections, thread lifts, or laserbrasion. Face lift surgery or rhytidectomy is the procedure most directly associated with rejuvenation, due to its fundamental ability to restore the anatomical changes caused by aging. Various methods of face lift surgery have been developed over the last hundred years, thanks to advances in the understanding of facial anatomy and the mechanisms of aging, as well as the dedication of innovative surgeons. However, no generally applicable standard method exists, because the condition of each patient is different, and each operative method has advantages and disadvantages. Specific characteristics of the skin of Asians and their skeletal anatomy should be considered when determining the operative method to be used on Asian patients. Plastic surgeons should improve their ability to analyze the original aesthetic properties and problem areas of each patient, drawing on scientific knowledge about the aging process, and they should develop the skills necessary to perform various rejuvenative techniques. In the present article, we reviewed various face lift procedures and the current methods of modified double plane face lift, based on our clinical experience of over 30 years.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.445-452
• /
• 2008

Purpose: The purpose of this study was comparison of survival rate of implant as two sinus elevation techniques and when window opening procedure had done it was comparison of survival rate of implant between the procedure of implantation after 6 month of sinus elevation to allow healing period and that of implantation with sinus elevation simultaneously. Material and Methods: All 79 of patients treated at DanKook University Dental Hospital Dept. of Periodontics for 164 implantation of maxillary posterior edentulous area with sinus elevation. Sinus elevation technique was divided of the technique : Osteotome technique and window opening technique. Result: 14 implants among 96 implants was failed implants of using osteotome for sinus elevation whereas one implant of 68 implants was failed of using window opening technique. Conclusion: Window opening technique had higher survival rate than osteotome technique. In case of window opening, there was no significant difference of immediate implantation and delayed implantation.