• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.135-143
• /
• 2012

초고층 건축물은 일반적 건축물에 비해, 구조, 환경적 분야 뿐 아니라 시공 분야에서도 골조공사와 마감공사의 시공방법, 재료, 공사관리 등에서 차이점이 있다. 특히 초고층 건축물 시공에서 요구되는 다양한 관리기법 중 양중계획 및 관리는 핵심적인 분야이며, 건설공사에 필요한 인원 및 자재와 같은 자원을 리프트카와 같은 양중기계장비를 이용하여 효율적으로 수직이동하여야 한다. 그러나 리프트카의 경우 초기 수립된 계획과 실제 운영에 차이가 발생하는 경우가 많고 이러한 비효율성으로 인해 문제가 발생하는 경우가 많다. 본 연구에서는 양중작업에 사용되는 리프트카를 대상으로 건축마감공사의 자원물량에 근거한 양중부하 산정 방법 및 예측 모델을 제시하고자 한다. 그 결과 리프트카 운행시간 및 사이클타임을 계산하여 총 양중장비 가동시간 및 양중가능 물량을 산출할 수 있을 것이다. 이를 양중장비조합을 위한 의사결정 지원 모델 구축을 위한 연구로 발전시켜 나갈 것이다.

• 한국멀티미디어학회논문지
• /
• 제8권1호
• /
• pp.19-26
• /
• 2005

본 논문에서 사용한 웨이블릿 변환의 기저 함수는 일반적인 웨이블릿 변환과 다른 리프팅 스킴을 사용하여 만들어 졌다. 리프팅 스킴은 푸리에 변환을 사용하여 기저 함수를 생성하지 않는 새로운 쌍직교 웨이블릿 기저 함수를 생성하는 방법이다 본 본문은 리프팅 스킴을 이용한 새로운 영상 압축 및 에지 검출 방법을 제안하고 있다. 그리고 이 방법은 부분 복원과 공간 복원을 할 수 있어 데이터 가시화를 향상시킬 수 있다. 다양한 해상도에서의 근사 영상은 원래 영상으로부터 적은 정보만으로 다양한 크기의 특징을 뽑아낼 수 있고, 적은 양의 스케일링 계수를 사용하여 생성된 근사 영상은 빠르게 원래 영상의 대략적인 개요만이 필요할 때 유용하게 사용된다. 본 논문에서 제안한 영상 압축 및 에지 검출 기법은 멀티미디어 데이터베이스에서 데이터 관리와 데이터 가시화를 향상시킬 수 있는 좋은 기틀을 마련해 준다.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.257-262
• /
• 2011

Purpose: In neurofibromatosis patients, complete surgical excision of the mass is almost impossible and surgical treatment usually consists of multiple serial excisions that only result in a debulking effect. Remnant tumor mass has a gravitational effect on facial soft tissues that leads to sagging of skin and soft tissue, and eventually, facial disfigurement and asymmetry. The purpose of our surgical method is to perform soft tissue lifting with longer lasting effect with less surgical risk of damaging facial nerve and vessels. With external fixation using K-wire or surgical screw, the procedure only called for a short incision length and had additional adhesive properties that enabled anchoring of soft tissue in a lifted position for a longer postoperative period. Methods: A total of 5 neurofibromatosis patients (NF-1) visited our clinic for mass reduction and face lifting. The age of patients ranged from 13 to 42 (mean 28.8 years), and most patients had a long history of multiple excisions in the past. Face lifting was performed in 2 different areas, the periorbital area in 3 patients, and the midface in 2 patients. The materials used in fixation of retaining ligament were K-wire (n=3) and titanium screw (n=2). Results: Follow up period was from 5 month to 3 years and 1 month (mean=2 years and 1 month). All patients conveyed satisfaction with the results and no major complications were reported. The lifting effect lasted for as long as 3 years, and there were no complaints of relapse of soft tissue depression or sagging within the operated area. 1 patient (M/13) needed secondary k-wire insertion and additional mass excision in 1 year and 10 months postoperatively due to tumor growth. In two patients with K-wire fixation, mild dimpling and tenderness were observed in the follow up period, but in about 2 months postoperatively, dimpling was relieved and there was no need for removal of fixating material. Conclusion: Surgical lifting in neurofibromatosis patients can be challenging, for mass excision cannot be done completely and gravitational effect by residual mass can be persistent. External fixation of the retaining ligament in patients with neurofibromatosis can give satisfactory results-for incision length is relatively shorter, and the lifting effect can last longer compared to other various face lifting techniques.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.251-255
• /
• 2008

Flow field around helicopter involves incompressible flow near the blade root and compressible flow at the blade tip. A problem occurs for low Mach number flow due to the stiffness of the governing equations. Time-derivative preconditioning techniques have been incorporated to reduce the stiffness that occurs at low speed region. The preconditioned form of the compressible Navier-Stokes and Euler equations is used. Computations are performed for the Caradonna-Tung's hovering and non-lifting forward flight case. Computational results are in good agreement with the experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.251-255
• /
• 2008

Flow field around helicopter involves incompressible flow near the blade root and compressible flow at the blade tip. A problem occurs for low Mach number flow due to the stiffness of the governing equations. Time-derivative preconditioning techniques have been incorporated to reduce the stiffness that occurs at low speed region. The preconditioned form of the compressible Navier-Stokes and Euler equations is used. Computations are performed for the Caradonna-Tung's hovering and non-lifting forward flight case. Computational results are in good agreement with the experimental data.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2315-2318
• /
• 2003

The Wavelet Transform has been applied in mathematics and computer sciences. Numerous studies have proven its advantages in image processing and data compression, and have made it a basic encoding technique in data compression standards like JPEG2000 and MPEG-4. Software implementations of the Discrete Wavelet Transform (DWT) appears to be the performance bottleneck in real-time systems in terms of performance. And hardware implementations are not flexible. Therefore, FPGA implementations of the DWT has been a topic of recent research. The goal of this thesis is to investigate of FPGA implementations of the DWT Processor for image compression applications. The DWT processor design is based on the Lifting Based Wavelet Transform Scheme, which is a fast implementation of the DWT The design uses various techniques. The DWT Processor was simulated and implemented in a FLEX FPGA platform of Altera

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.113-114
• /
• 2016

This paper proposes a technical requirements analysis of implementation of multi-trade prefabrication. Recently, there has been a rise in the use of prefabrication to minimize on-site work for time reduction to increase productivity. Prefabrication technique is evolved into multi-trade prefabrication combining other trades from single-trade prefabrication. For implementation of new technique, not only itself but complementary techniques have to be prepared. In this paper, MEP corridor rack, a major item of multi-trade prefabrication, was implemented in the test bed and its process was analyzed to find out technical requirements. As a result, comparatively high level of IT technique was required for efficient use of multi-trade prefabrication in design, lifting and construction phase. In design phase, component level of BIM library was needed for manufacturing; and in lifting phase, BIM-based site logistics process was required. Also in construction phase, laser scanning was implemented for gathering shape and geometry of the wall and slab that were attached to multi-trade prefabrication module.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.321-323
• /
• 2015

Monitoring crane motion in real time is the first step to identifying and mitigating crane-related hazards on construction sites. However, no accurate and reliable crane motion capturing technique is available to serve this purpose. The objective of this research is to explore a method for real-time crane motion capturing and investigate an approach for assisting hazard detection. To achieve this goal, this research employed various techniques including: 1) a sensor-based method that accurately, reliably, and comprehensively captures crane motions in real-time; 2) computationally efficient algorithms for fusing and processing sensing data (e.g., distance, angle, acceleration) from different types of sensors; 3) an approach that integrates crane motion data with known as-is environment data to detect hazards associated with lifting tasks; and 4) a strategy that effectively presents crane operator with crane motion information and warn them with potential hazards. A prototype system was developed and tested on a real crane in a field environment. The results show that the system is able to continuously and accurately monitor crane motion in real-time.

• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.81-86
• /
• 2012

본 논문은 하드웨어 곱셈 연산을 최적화 한 리프팅 기반의 9/7 웨이블릿 필터의 VLSI 구조를 제안한다. 제안하는 구조는 범용 곱셈기를 사용하는 기존의 리프팅 기법과 달리 웨이블릿 계수에 패턴 탐색 기법의 Lef$\grave{e}$vre 알고리즘을 적용하였으며, MCM(Multiple constant multiplication)과 폴딩 방식을 9/7 DWT 필터에 적용하여 효율적으로 하드웨어 설계가 이루어 질수 있도록 제안하였다. 이러한 구조는 하드웨어 자원을 100% 활용하는 이점을 지니며, 이전의 성능에 비해 화질 열화 없이 단순한 하드웨어 구조, 속도, 면적, 전력소모 측면에서 효율적이다. 비교 실험을 위해 Verilog HDL을 통해 구현하였으며, $0.18{\mu}m$ CMOS 공정의 스탠다드 셀을 이용하여 합성하였다. 제안한 구조를 기존의 구조와 200MHz의 합성 타겟 클럭 주파수에서 비교하였을 때 면적, 전력소모 측면에서 60.1%, 44.1% 감소하였으며, 이를 통해 이전의 리프팅 기법에 비해 하드웨어 구현에 보다 최적화된 구조임을 보여준다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권6호
• /
• pp.442-450
• /
• 2009

Purpose: Simultaneous implantation has been traditionally limited to patients with at least 5 mm of residual bone to ensure that the implant is completely stabilized. This is considered to be one of the most critical factors for primary implant stability and parallelism and, subsequently osseointegration. Recently, improved initial implant stability is provided by advancement of surgical techniques, implant designs and surface treatments. This has led surgeons to extending simultaneous treatment option to patients with below 4 mm of residual bone height, despite the lack of much data. The purpose of this study was to retrospectively evaluate and compare the status of implants which are installed by delayed and simultaneous methods. Material and methods: The subjects were patients(121 patients, 278 implants) who had been operated with sinus lifting from 2003 to 2007 in Sun Dental Hospital. Lateral window approach with autograft and xenograft(1:1 ratio) were carried out for all sinus lifting. 4 types of implant were used. The mean follow up period was 26.3 months(19 - 58 months) in delayed group, and 22.8 months(18 - 43 months) in simultaneous group. Results: The survival rate of implant restoration of this study was 98.2% in delayed group and 91.7% in simultaneous group. In simultaneous group, wide-platform type implants showed 100% survival rate. The total average of marginal bone loss in radiographs was $0.96\;{\pm}\;0.29\;mm$ in delayed group and $1.02\;{\pm}\;0.31\;mm$ in simultaneous group. Conclusion: Simultaneous implantation with sinus lifting(below 4mm of residual bone height) could be predictable treatment.