• 한국안전학회지
• /
• 제24권2호
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• 한국운동역학회지
• /
• 제28권4호
• /
• pp.199-205
• /
• 2018

Objective: The purpose of this study was to examine the effect of increase in barbell weight on closely related variable to the anterior cruciate ligament (ACL) injury which are knee joint kinematics, joint load, joint moment, and maximum load attainment point during snatch of the weight lifting. Method: The subjects of the study were 10 male Korean national weight lifting athletes (69 kg 5, 77 kg 5; age: $21.80{\pm}3.91yrs.$, height: $168.00{\pm}4.06cm$, weight: $75.00{\pm}4.02kg$, career: $7.8{\pm}3.99yrs.$, snatch records: $168{\pm}4.06kg$). The weight of the barbell during the snatch operation was set at 70%, 75% and 80% of the highest records for each subject studied. Results: The result obtained from the one-way repeated measure ANOVA are as follows: With increased barbell weight, the extension moment of the left knee joint was higher in the 80% condition than the 70% (p<.001). However, other variables were not statistically significant difference. According to the factor analysis of the variables related to maximum load attainment point of the ACL major injury variables, the first sub-factor was the internal shear force, the posterior shear force, the abduction moment, and the muscle activity of the VL. The second sub-factor was the extension moment of the knee joint, compressive force, adduction moment, and the third sub-factor was the muscle activity of BF. Conclusion: These results indicate that the possibility of ACL injury can be lowered when performing a stable snatch movement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.143-150
• /
• 2015

현재 국내 모듈러 구조물은 저층의 단독주택 및 군 병영생활관에 한정되어 있는 실정이며, 적층식 모듈러 구조물에 대한 표준화된 구조설계 방법이 없으므로 구조물의 시공과정에서 모듈의 양중이나 운송 시 발생되는 관성력, 양중 시 구조물에 대한 풍하중의 영향, 모듈의 적층 설치 시 충격력 등에 대한 검토가 일반적으로 이루어지고 있지 않다. 따라서 본 연구에서는 대상 모듈러 시스템에 대한 단계별 시공방법을 살펴보고, 각 시공단계에 대한 구조해석 시 경계조건 및 하중 작용위치를 결정하였다. 또한 모듈의 양중 및 차량운반 시 각각의 속도에 따른 관성력을 산정하였으며 모듈의 적층설치 작업 시 양중속도에 따른 충격하중과 양중에 의한 설치작업 시 순간풍속에 의한 풍하중을 산정하였다. 제안된 방법을 토대로 대상 모듈러 시스템에서 양중 시와 운송 시, 설치 시 등 시공단계별 하중크기 결정조건을 변화시켜 구조검토를 수행하였으며 구조적으로 안전성이 확보되는 시공조건을 도출하였다.

• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.77-85
• /
• 2003

기존 강상자형 연속교의 단점을 보완하고 보다 경제적인 단면의 설계를 위한 지점 상승 하강 강상자형교는 내측 지점의 부모멘트 구간에 전단 연결재를 설치하고 콘크리트를 충진시켜 단면의 강성을 높이고 지점의 상승 및 하강 과정을 통하여 바닥판 콘크리트에 선압축력을 도입한다. 본 공법을 사용하면 한국도로공사 도로설계실무편람(1996)이 제시한 강상자형교의 설계 및 표준 단면의 형고에 비해 약 12%를 낮출 수 있으므로 형하 공간 확보에 유리하고, 같은 형고를 가지는 경우 상 하 플랜지 두께를 줄여 전체 강재량을 14%가량 감소시킬 수 있다. 평판의 강성을 크게 하기 위해 두께를 증가시키는 것보다 보강재로 보강하는 것이 일반적인 방법이므로 강상자형교 주형의 상 하부 플랜지 및 복부판은 각종 보강재로 보강된 얇은 판의 형태로 구성되어 있다. 이와 같이 보강된 평판의 탄성 좌굴계수(k)는 작용력의 종류, 형상비, 경계조건 외에도 보강재로 수, 배치 간격, 강성비와 면적비에 따라 각기 다른 특성을 가진다. 기존의 강상자형 연속교와 달리 지점 상승하강 강상자형교의 하부 플랜지 및 복부판은 내측 지점의 상승 과정에서 큰 압축력을 받게 되므로 전체 주형의 좌굴이 발생하기 전에 구성 판이 먼저 좌굴을 일으킬 가능성이 크다. 그러므로 본 연구에서는 내측 지점의 상승력과 보강된 판의 강도를 고려하여 일부 정모멘트 구간의 하부 플랜지 및 복부판의 종방향 보강재 수를 증가 시키고 수평 보강재를 연장하여 배치한다.

• The Journal of Korean Physical Therapy
• /
• 제13권1호
• /
• pp.73-82
• /
• 2001

In order to study the effect of the isometric exercises on the flexibility. the strength and the waist and hip circumferences, 10 female university students who aged 22.10 ${\pm}$ 1.10 years were measured by sit-up for strength, and trunk flexion test and trunk lifting for flexibility, and also measured by waist and hip circumferences before and during, and after the Swiss ball exercise program. Statistical analysis was performed using SPSS/PC WIN 7.0 version. and one-way repeated ANOVA Test, The results of the test were as shown; We found that the number of performing sit-up was increased. and the trunk flexion test and trunk lifting was increased, and the waist and hip circumferences were increased after the 6 weeks Swiss ball exercise program. These findings indicate that Isometric exercise using Swiss ball could be beneficial to the low back pain patients due to the effect of increasing strength and flexibility of the patients.

• 한국콘텐츠학회논문지
• /
• 제9권2호
• /
• pp.252-260
• /
• 2009

본 연구는 신체능력향상프로그램이 다운증후군 성인의 작업강도에 미치는 영향을 알아보고자 하였다. 이를 위해, 8명의 다운증후군 성인이 신체능력향상프로그램에 참가하고 작업강도를 측정하였다. 신체능력 향상프로그램은 악력, 들어올리기, 운반 운동으로 구성되었으며, 주 1회 2시간 씩 12주에 걸쳐 진행되었다. 프로그램 실시 전과 비교해 보면, 참가자들은 우측 악력과 들어올림 능력에서는 유의한 변화를 나타냈고 운반 능력에서는 유의한 변화가 없었다. 들어올림에서는 2명의 작업강도 수준이 보통 작업에서 힘든 작업의 수준을 나타냈다. 운반에서는 1명은 아주 가벼운 작업에서 보통 작업으로 그리고 2명은 가벼운 작업에서 보통 작업 수준으로 변화를 나타냈다. 이러한 결과는 신체능력향상프로그램이 다운증후군 성인의 작업강도 향상에 유용함을 제시하고 있다.

• 설비공학논문집
• /
• 제27권5호
• /
• pp.263-268
• /
• 2015

In this study, the performance of an ejector in the refrigeration cycle was experimentally studied using R600a. The performance of the ejector is analyzed according to the inlet pressure and nozzle position. The increase in the primary nozzle pressure decreased the pressure difference across the ejector. In the low entrainment region, the increased suction flow pressure led to an increase in the pressure difference. In the high entrainment region, the pressure difference was inversely proportional to the suction pressure. The effects of nozzle position ($L_n$) were also analyzed and for $L_n<0$, the decreased suction chamber volume led to a large pressure drop with the small increase in the suction mass flow rate. For $L_n>0$, the increased $L_n$ disturbed the primary nozzle flow and thus an increase in the primary nozzle flow increased the pressure lifting effect. In contrast, the increased suction mass flow rate decreased the pressure difference. When the nozzle outlet was located at the mixing part entrance ($L_n=0$), the ejector showed the highest pressure lifting effect.

• 대한본초학회지
• /
• 제21권1호
• /
• pp.25-31
• /
• 2006

Objectives : We investigated the aniti-aging effects of the cosmetic products with Pinus densiflora on human skin by using non-invasive instruments. Methods : We made cosmetic products containing the extract of the needles of red pine, and measured physiological effects such as skin wrinkles, clarity, evenness, lifting, corneocyte exfoliation after volunteers applied the cosmetic products for 8 weeks. Results : We observed a skin lifting effect and a decrease in corneocytes amount after using the cosmetic products for 4 weeks. And the wrinkles, evenness and clarity of face skin improved significantly. Conclusion : We concluded that the cosmetic products containing the extract of the needles of reel pine had an anti-aging effect on the human face skin.

• 한국전문물리치료학회지
• /
• 제28권3호
• /
• pp.227-234
• /
• 2021

Background: The serratus posterior inferior (SPI) muscle originates from the spinous process of T11-L2 and inserts at the lower border of the 9-12th ribs. This muscle is involved in thoracolumbar rotation and stability. Several positions can be used to improve trunk stability; the quadruped position is a good position for easily maintaining a neutral spine. In particular, during one arm lifting, various muscles act to maintain a neutral trunk position, and the SPI is one of these muscles. If trunk stability is weakened, uncontrolled trunk rotation may occur at this time. Tape can be used to increase trunk stability. There have been no studies on the effect of taping applied to the SPI muscle on thoracolumbar junction (TLJ) stability. Objects: This study compared the TLJ rotation angle between three different conditions (without taping, transverse taping, and SPI muscle direction taping). Methods: Thirty subjects were recruited to the study (18 males and 12 females). The TLJ rotation angle was measured during one arm lifting in a quadruped position (ALQP). Two taping methods (transverse and SPI muscle direction taping) were applied, and the TLJ rotation angle was measured in the same movement. Results: SPI muscle direction taping significantly reduced TLJ rotation compared to that without taping (p < 0.001) and with transverse taping (p < 0.001). There was a significant difference in the TLJ rotation angle between transverse taping and SPI muscle direction taping (p < 0.017). Conclusion: SPI muscle direction taping reduces the TLJ rotation angle during ALQP. Therefore, SPI muscle direction taping is one method to improve TLJ stability and reduce uncontrolled TLJ rotation during ALQP.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.204-209
• /
• 2007

This study was carried out to analyze the effect of wind load on the structural stability of a container crane according to the increase of the lifting capacity using wind tunnel test and provided a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load at 75m/s wind velocity is applied on a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary-layer wind tunnel with $11.52m^{2}$ cross-section area. Each directional drag and overturning moment coefficients were investigated.