• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.457-465
• /
• 2009

리튬계열 전지는 다른 이차전지에 비해 평균전압 및 에너지 밀도가 높으며 가볍고 수명이 긴 장점으로 인해 휴대용 전자기기에 폭넓게 사용되고 있으며, 특히 전기 자동차용으로 높은 수요가 예측되고 있다. 전기 자동차용 리튬 전지의 경우 운행 가능 거리의 정확한 계산이 요구되며, 또한 크랭킹이 불가능한 상태로 방전이 되지 않아야 하므로 충전상태에 대한 정확한 정보는 신뢰성 있는 운전을 위한 필수적인 요소가 된다. 본 논문에서는 AC 임피던스를 이용하여 리튬 폴리머 전지의 충전상태(SOC: State of Charge)를 추정하는 새로운 방법에 관해 제안한다. 제안된 방법에서는 주파수 별로 측정된 임피던스를 등가 임피던스 모델에 커브 피팅하여 파라미터를 추출하고, 추출된 파라미터를 이용하여 충전상태를 추정하였다. 제안된 방법에 의해 추출된 파라미터를 통해 리튬전지의 SOC 추정이 가능함을 증명하였고, 다수의 제조사에서 제작된 비슷한 용량의 리튬 폴리머 전지를 대상으로 한 실험을 통해 제안된 방법의 유용함을 검증하였다.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.794-801
• /
• 2003

건축물의 요구성능에 대한 관심이 점차 높아짐에 따라 건축물의 성능평가를 통하여 사용연한을 예측하고 건축물의 수명을 연장시키거나, 새롭게 재구성하려는 노력이 계속되고 있다. 그러나 아직 염화물에 의한 성능저하 평가에 있어 그 비용의 문제와 평가과정의 전문성 등의 많은 난점을 가지고 있다. 본 연구는 콘크리트 내부의 염화물침투 깊이를 측정하는 간이적 방법인 비색판별법을 이용하여 염화물에 의한 성능저하평가를 하고자 비색판별법의 적용가능성을 검토 후 변색위치의 침투염화물량을 정량분석하였다. 또한, 이를 이용하여 콘크리트 표면염화물량을 산정하고 철근위치 염화물량의 예측 및 한계염화물량에 도달시간 예측의 실용적 평가수단을 제시하였다. 염화물에 의한 철근콘크리트 구조물의 성능평가에 있어 간이평가 수단인 비색판별법의 활용에 따라 샘플수의 다량확보를 통한 신뢰수준의 향상을 이룰 수 있을 것으로 사료된다.

• The Journal of Korean Physical Therapy
• /
• 제27권1호
• /
• pp.38-42
• /
• 2015

Purpose: Accuracy and variability of movement in daily life require synchronization of muscular activities through a specific chronological order of motor performance, which is controlled by higher neural substrates and/or lower motor centers. We attempted to investigate whether transcranial direct current stimulation (tDCS) over primary sensorimotor areas (SM1) could influence movement variability in healthy subjects, using a tapping task. Methods: Twenty six right-handed healthy subjects with no neurological or psychiatric disorders participated in this study. They were randomly and equally assigned to the real tDCS group or sham control group. Direct current with intensity of 1 mA was delivered over their right SM1 for 15 minutes. For estimation of movement variability before and after tDCS, tapping task was measured, and variability was calculated as standard deviation of the inter-tap interval (SD-ITI). Results: At the baseline test, there was no significant difference in SD-ITI between the two groups. In two-way ANOVA with repeated measurement no significant differences were found in a large main effect of group and interaction effect between two main factors (i.e., group factor and time factor (pre-post test)). However, significant findings were observed in a large main effect of the pre-post test. Conclusion: Our findings showed that the anodal tDCS over SM1 for 15 minutes with intensity of 1 mA could enhance consistency of motor execution in a repetitive-simple tapping task. We suggest that tDCS has potential as an adjuvant brain facilitator for improving rhythm and consistency of movement in healthy individuals.

• Industrial Engineering and Management Systems
• /
• 제12권3호
• /
• pp.244-253
• /
• 2013

In industries, shipping is an important issue in improving the forecasting accuracy of sales. This paper introduces a hybrid method and plural methods are compared. Focusing the equation of exponential smoothing method (ESM) that is equivalent to (1, 1) order autoregressive-moving-average (ARMA) model equation, a new method of estimating the smoothing constant in ESM had been proposed previously by us which satisfies minimum variance of forecasting error. Generally, the smoothing constant is selected arbitrarily. However, this paper utilizes the above stated theoretical solution. Firstly, we make estimation of ARMA model parameter and then estimate the smoothing constant. Thus, theoretical solution is derived in a simple way and it may be utilized in various fields. Furthermore, combining the trend removing method with this method, we aim to improve forecasting accuracy. This method is executed in the following method. Trend removing by the combination of linear and 2nd order nonlinear function and 3rd order nonlinear function is executed to the original production data of two kinds of bread. Genetic algorithm is utilized to search the optimal weight for the weighting parameters of linear and nonlinear function. For comparison, the monthly trend is removed after that. Theoretical solution of smoothing constant of ESM is calculated for both of the monthly trend removing data and the non-monthly trend removing data. Then forecasting is executed on these data. The new method shows that it is useful for the time series that has various trend characteristics and has rather strong seasonal trend. The effectiveness of this method should be examined in various cases.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2819-2832
• /
• 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and petroleum plants has been recently concerned. The raw materials used in this study are the 1Cr-1Mo-0.25V steel which intensified P and S compositions along with the nominal compositions of ASTM A 470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging heat treatment at 630.deg.C. The mechanical properties and rotated bending fatigue strength of virgin and aged 1Cr-1Mo-0.25V steel have been investigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at 538.deg.C and room temperature, respectively. Thus the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows ; The decrease of the yield and tensile strength due to degradation was distinguished until 50, 000hrs simulated service time. And it was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The rotated bendingd fatigue strength at 538.deg.C of virgin, 25, 000, 50, 000, 75, 000 and 100, 000 hrs aged material was decreased 44.6 %, 49.6 %, 51.5 %, 52.4% and 53.8% than that of virgin material at 10$_{7}$cycles of room temperature, respectively. The major cracks of virgin and aged materials mainly initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.n.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권1호
• /
• pp.64-75
• /
• 2013

실내촉진실험과 동시에 현장폭로실험을 병행하였기 때문에 연차별 실험계획에 따라 최근 5년차의 현장실험체 분석을 수행하고 모델을 업그레이드하는 과정에서 모델 검증을 위해 준공된 지 30년 가량된 방조제의 배수갑문콘크리트의 염화물 침투프로파일을 분석하였다. Zhang의 연구결과에서 언급된 표면에 가까운 콘크리트내부 염화물 농도를 기본모델의 표면염화물농도 대신으로 적용하였다. 장기간 노출되는 실험체의 염화물 측정자료 분석에서 확산계수의 변화분석을 통하여 Maage의 제안식을 기본모델에 적용하였다. 이렇게 보완된 수정모델을 통하여 예측된 자료와 현장자료를 비교하고, 임계시점, 즉 보수시점을 도출함으로서 본 연구의 제안모델과 유지보수 시스템이 간만대 염화물 침투프로파일 추정과 적정보수 시점 및 비용 예측에 사용될 수 있음을 보였다.

• 대한수의학회지
• /
• 제46권3호
• /
• pp.285-289
• /
• 2006

This study was performed to assess the growth plate closure time with aging in the Korean native goat. Radiographs of proximal and distal epiphysis of humerus, radius, ulna, femur and tibia were obtained at 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 17, 18, 20, 21, 30, 43 and 52 weeks after birth in 30 Korean native goats. The secondary ossification centers were scrutinized and assessed the maturity process on the basis of the criteria(stage 0 to 10). The secondary ossification centers of proximal and distal epiphysis of humerus, radius, femur and tibia and proximal ulna epiphysis appeared immediately after birth. While, that of distal ulna epiphysis appeared during the 1st to 2nd week of life. The fusion of distal humeral epiphysis occurred during the period from 8 to 12 months. The fusion of proximal radial epiphysis and distal tibial epiphysis were found at 1 year. The fusion of proximal and distal epiphysis of ulna and femur, proximal epiphysis of humerus and tibia and distal epiphysis of radius were found at 1 year or more than 1 year. As a result, growth plate closure was highly related to age in the Korean native goat and it is suggested that the estimation of animal's age might be useful by illustration of maturity process of the secondary ossification centers in the Korean native goat.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.147-153
• /
• 2012

철도교량과 같이 주기적 가진에 의해 공진발생의 가능성이 높은 구조물에 있어서, 정확한 구조물의 동적거동 분석은 설계단계 및 공용중 안정적인 응답을 확보하기 위해 필수적이다. 특히, 콘크리트궤도는 강성기여와 질량기여를 통해 철도교량의 동특성을 변화시킬 수 있음에도 불구하고 일반적으로 철도교량 동적해석 시 질량으로만 고려되어진다. 본 연구에서는 실제 콘크리트궤도가 부설된 거더시험체를 제작하여 철도교량의 정 동적거동을 분석하였다. 또한, 궤도질량만을 고려한 경우와 궤도강성을 고려한 수치해석을 통해 중립축 위치와 고유진동수를 실험치와 비교 분석하였다. 이를 통해 콘크리트궤도 부설 철도교량의 경우 정량적인 산정이 가능한 콘크리트궤도의 강성과 질량을 고려한 해석값이 실험값과 근사한 결과를 얻을 수 있음을 확인하였다. 따라서 본 연구에서는 콘크리트궤도 부설 철도교량에 대한 동적설계 및 동적안정성 분석 시 콘크리트궤도의 강성과 질량을 함께 고려할 것을 제안하였다.

• 수산경영론집
• /
• 제46권3호
• /
• pp.103-118
• /
• 2015

The purpose of this paper is to discuss possibilities of applying growth curve models, such as Logistic, Log-Logistic, Log-Normal, Gompertz and Weibull, to three specific technology areas of Fishery Science and Technology in the process of measuring their technology level between Korea and countries with the state-of-the art level. Technology areas of hazard control of organism, environment restoration, and fish cluster detect were selected for this study. Expert panel survey was conducted to construct relevant panel data for years of 2013, 2016, and a future time of approaching the theoretical maximum technology level. The size of data was 70, 70 and 40 respectively. First finding is that estimation of shape and location parameters of each model was statistically significant, and lack-of-fit test using estimated parameters was statistically rejected for each model, meaning all models were good enough to apply for measuring technology levels. Second, three models other than Pearl and Gompertz seemed very appropriate to apply despite the fact that previous case studies have used only Gompertz and Pearl. This study suggests that Weibull model would be a very valid candidate for the purpose. Third, fish cluster detect technology level is relatively higher for both Korea and a country with the state-of-the-art among three areas as of 2013. However, all three areas seem to be approaching their limits(highest technology level point) until 2020 for countries with the state-of-the-art. This implies that Korea might have to speed up her research activities in order to catch up them prior to 2020. Final suggestion is that future study may better apply various and more appropriate models respectively considering each technology characteristics and other factors.

• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.153-168
• /
• 1993

파랑중을 항해하는 선박의 선체강도에 있어 선체에 작용하는 파랑하중을 정확히 추정하는 것은 매우 중요하다. 파랑하중 추정에 있어서 현재 널리 쓰이고 있는 선형스트립 이론은 배의 운동이 작은 낮은 파고에 의한 선체의 강체운동 응답에 기인한 파랑하중 계산법이다. 그러나, 대파고 파랑중에서 특히 슬래밍이 발생하게 되면 선체는 탄성체로서의 응답특성을 가지게 된다. 따라서 이런 경우 선체운동뿐만 아니라 탄성체 운동을 고려한 파랑하중 선체강도 해석법이 요구된다. 이미 본 연구자들은 이러한 배경으로 비선형 유체력이 선체에 작용할 때 선체변위로부터 파랑하중을 계산하여 선체강도를 평가하는 방법을 제안한 바 있다. 본 논문에서는 이러한 동적강도 해석법을 세가지 선종에 적용시켜 계통적인 수치계산을 수행하여 강체응답 및 파랑하중 특성을 비교, 고찰함으로써 파랑중 선체동적강도법의 기초자료를 제시하고자 한다.