• 품질경영학회지
• /
• 제49권3호
• /
• pp.341-358
• /
• 2021

Purpose: After product development, a Reliability Demonstration Test(RDT) is performed to confirm that the target life has been achieved. In the RDT, there are cases where the test equipment cannot accommodate all samples. Therefore, this study considers a test method to most economically demonstrate the target life of the product at a certain confidence level when the sample size is larger than the capacity of the test equipment. Methods: If the sample size is larger than the capacity of the test equipment, test equipments may be added or the test time of individual samples may be increased. So the test method is designed to cover this situation with limited capacity. A zero-failure test method is applied as a test method to RDT. To minimize the cost, the test cost is defined and the cost function is obtained. Finally, we obtain the optimal test plan. Results: A zero-failure test method is designed when the sample size is larger than the capacity of the test equipment, and the expected total cost is derived. In addition, the process of calculating the appropriate sample size, test time, and number of test equipment is illustrated through an example, and the effects of model parameters to the optimal solutions are investigated numerically. Conclusion: In this paper, we study a zero-failure RDT with test equipment that has limited capacity. The expected total cost is derived and the optimal sample size, test time, and number of test equipment are determined to minimize the expected total cost. We also studied numerical examples and for further studies, we can relax some restrictions in the test model and optimize the test method.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.92-99
• /
• 1999

High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in load bearing structures of pressurized components operationg at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damgage have been used. So far, the replica method is mainly used for the inspection of high temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or intergranular microcracks were carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation was analyzed. As a result of ultrasonic tests for crept for specimens, we founded that the sound velocity was decreased as increase of creep life fraction(${phi}c$) and also, confirmed that hardness was decreased as increase of creep life fraction(${phi}c$).

• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.18-23
• /
• 2013

Thermal aging test is performed to qualify the life time of equipment in thermally aged condition. Due to long life time more than 10 years like as in power plant, the equipment is subjected to the accelerated thermal aging condition which is able to shorten the long aging test period by increasing aging temperature. Normally, conservatism of thermal aging test causes to impose unbalanced and excessive thermal load on components of the equipment, and deformation and damage problems of the components. Additionally, temperature rise of each component through heat generation of the electric equipment leads to long-term problem of the test period. Multi-phase accelerating aging test is to perform thermal aging test in multiple aging conditions after dividing into groups with various components of equipment. The groups might be classified considering various factors such as activation energy, temperature rise, glass transition temperature and melting temperature. In this study, we verify that the multi-phase accelerating aging test method can reduce and equalize the thermal over load of the components and shorten aging test time.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.50-57
• /
• 2017

Purpose : This paper is a comparative analysis results of the fatigue test for dental implants and accelerated life test by using a static type loading device commonly used in Korea and a dynamic type loading device (universal-joint) recommended by FDA. Methods : Fatigue tests of dental implant is based on ISO 14801 and classified into static load test and dynamic load test. The tests were carried out on three test specimens by four load stress steps under each loading device. For analysis on failure mode such as crack, fracture and permanent deformation of test specimens, we used X-ray three-dimensional computed tomography on test specimens before and after the fatigue tests. The design of the accelerated life test was based on the analysis results of the fatigue life data obtained from the dynamic load test and the statistical analysis software (Minitab ver.15) was used to analyze the appropriate life distribution. Results : As a result of the fatigue tests and the accelerated life tests at same acceleration condition under each test method, the fatigue life under the dynamic type loading device (universal-joint) was shorter than when static type loading device was applied. Conclusion : This paper can be used as a reference when the universal-joint type loading device for implants fatigue test is applied as ISO 14801.

• 한국가정과교육학회지
• /
• 제2권1호
• /
• pp.101-110
• /
• 1990

The purpose of this study is to survey the learner’s need achievement, interest and practical level of the learning objectives according to the teacher’s teaching method in home economics of middle school(Dietary Life Unit), to examine the differences according to the local situation, and to get some information to improve the teaching method. This study surveyed the eight units of dietary life with 459 students in the rural community (224 students) and Seoul(235 Students). The collected data were analyzed by T-test, F-test. To sum up this study are as follows: 1. When the need, achievement, interest and practical level of unit “food”are compared the students of seoul with those of rural community, the student of Seoul show high in “The use of Processed Foodstuffs” and low in “Cooking the Processed Foodstuffs.”The student of rural community show in “A kind of Cooking Method”and low in “Environment and Food Life”. 2. The need, achievement, interest, practical level of the whole unit in rural community is higher than those is Seoul. 3. According to teaching method, comparison Seoul with rural community is revealed as follows. Seoul region is revealed significance to discovery learning in “Cooking Foodstuffs(The achievement and interest level) and ”Environment and Food Life”(interest level). Rural community is revealed significance to discussion learning in “The constituent and Food Life”(The need level, interest level). Rural community is revealed significance to explanation learning in “Environment and Food Life”(The achievement level).

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2271-2279
• /
• 1993

In the case of life prediction on the structures and machines after long service, it is natural to consider a degradation problems. Most of degradation data form practical structures are isolated data obtained at the time of periodical inspection or repair. From such data, it may be difficult to obtain the degradation curve available and necessary for life prediction. In this paper, for the purpose of obtaining a degradation curves, developed the simulate degradation method and fatigue test and Charpy impact test were conducted on the degraded, simulate degraded and recovered materials. Fatigue life prediction were conducted by using the relationship between fracture transition temperature (DBTT : vTrs) obtained from the Charpy impact test through the degradation process and fatigue crack growth constants of m and C obtained from the fatigue test.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.202-205
• /
• 2010

In this paper, mechanical reliability(Life-time) estimation method for 25.8kV SIS(Solid Insulated Switchgear) has been studied. Recently enacted KEPCO's standard includes clause that have to submit a warrantable reliability data for life-time(over B10 25 years) of an epoxy-solid insulating material. Accordingly, this research was carried out on the ALT(Accelerated Life Test) and Life-Estimation method for SIS's insulating material. Mechanical life-time estimation for SIS's insulating material is to verify reliability for tensile creep & fatigue stress, which is the major mechanical stress of SIS. This study proved that SIS's reliability for mechanical stress and established that confidence for estimation results in further verification test.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
• /
• pp.41-48
• /
• 2011

In order to assess the reliability of the Tire Pressure Sensor for automobiles, accelerated life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; i) the main failure mechanism is degradation failure that is, PCB destruction and battery Discharge by high temperature. ii) the life distribution of the Tire Pressure Sensor fitted well to Weibull life distribution and the accelerated life model of that is fitted well to Arrhenius model. iii) at the result of the life distribution, accelerated life test method is developed

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제2권1호
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권3호
• /
• pp.191-198
• /
• 2008

FRP 복합체의 함침 접착에 사용되는 에폭시 수지와 같은 2액형 접착제는 두 성분을 상호 혼합함으로써 경화반응이 시작되며, 일정 시간이 경과되면 접착제의 점도와 온도가 급격히 증가된다. 이와 같이 접착제의 점도가 증가되면 작업성과 접착력이 저하되므로, 현장에서의 작업은 시공연도(workability)가 유지되는 한계, 소위 "사용가능시간(pot life)" 이내에 완료되어야만 한다. 본 연구에서는 구조보강용 FRP 복합체의 함침 접착에 사용되는 에폭시 수지의 사용가능시간을 평가하기 위하여 기존에 제안되고 있는 점도변화법 및 발열온도상승법의 적합성을 검증하고, 실험결과의 비교 분석을 통하여 구조용 접착제의 사용가능시간을 보다 합리적으로 산정할 수 있는 시험방법 및 평가기준을 제안하였다.