• Journal of Korean Public Health Nursing
• /
• v.15 no.2
• /
• pp.225-238
• /
• 2001

The purpose of this study is to examine public health nurses for their morale, test the effect of each factor on the morale, determine the variables affecting the morale, and thereby, provide for some basic data useful to the development of personnel affair administration for nurses. The survey on the nurses for public health centers was conducted for 10 days from April 23 to May 2, 2001; 96 nurses from Pusan, 101 from Kyonggi-do and 108 from Kangwon-do. The results of the study are as follows; 1. For the demographic variables, those aged between 31 and 39 accounted for the majority $(50.2\%)$ of the sample. $90.8\%$ was married, and $67.9\%$ of the sample graduated from junior colleges. $29.6\%$ of them had worked for 10-14 years and $62.5\%$ was of the seventh rank. $62.3\%$ of the nurses was recruited, and $59.4\%$ had chosen the public job for its guaranteed status. Half the nurses were working for the county population of which was more than 260 thousands, and $53\%$ of the nurses was serving the public health centers with 11-15 members. $47.3\%$ of them perceived that their living standard is middle or lower. 2. The degree of the moral was found as mean score. 2.65, which is interpreted as low. It has 11 factors. The rank of mean score of the factors is job satisfaction (3.36), sense of belonging (3.36), sense of recognition (3.30), stress due to supervision (3.13), degree of participation (3.05) and self-achievement (3.04), while those scoring lower points were assurance of status (2.58), pay level (2.53), working conditions (2.35) and promotion opportunity (2.31). 3. The degree of moral depending on the demographic variables was significantly affected by such variables as age. academic background, career, rank, employment method, motive for the job, size of the population served and living standards. 4. The result of the Stepwise multiple regression analysis for the morale factors, it was found that self-achievement accounted for $61\%$ of the total variance of the degree of morale, followed by stable status $(18\%)$, working conditions $(8\%)$, job requirements $(4\%)$ and promotion opportunities $(2\%)$; these five factors explained about $94.6\%$ of total variance of the degree of nurses' morale. On the other hand. age $(8\%)$ and academic background $(2\%)$ accounted for $10\%$ of the total variance of the degree of morale. 5. The factors affecting nurses' job life was economic need $(26.7\%)$, personnel management $(17.5\%)$, sense of recognition $(13.2\%)$, human relationship $(11.0\%)$, stable status and personal development in rank. On the other hand, the factors influencing on their possible resignation were children's bringing-up $(27.8\%)$, poor personnel management and promotion $(13.3\%)$, workload $(11.1\%)$ and little personal development $(8.9\%)$, Since such morale factors as promotion opportunity, working condition. pay level and stable status scored lower, it is required to reconsider those factors to improve nurses' morale.

• Journal of Korean Public Health Nursing
• /
• v.11 no.2
• /
• pp.152-170
• /
• 1997

The purpose of this study was to identify physical. psychological. sexual and socio-cultural problems that the adolescents have experienced and to assess the demands of counseling about the experienced problems. The design of this study was descriptive-survery study. The sample size was 601 middle and high school students. Data analysis was done by frequencies. Percent. t -test. ANOVA. Pearson correlation coefficiency, stepwise regression and Cronbach's $\alpha$ Score was produced for the reliability of the tool by using the item analysis method. The results was as follows : 1. The distribution of the each item that the adolescents experienced according to the physical, psychalogical. Sexual and Socio-cultural problem Categories was examined. In the physical problem category, the number of items that half and more than half of the adolescents experienced of often or frequently were 10 among all 19 items. In the psychological problem category. 13 item were among all 19 items. In the sexual problem category, 1 item among all 17 items and in the socio-cultural problem category, 10 items were among all 30 items. 2. The distribution of the each items that the adolescents wanted to the counseling according to the physical. psychological. sexual and socio-cultural problem categories was examined. In the physical problem category, the numbers of the items that half and more than half of the adolescents wanted counseling were 1 among all 19 items. In the psychological problem category, the numbers of the items that half and more than half of the adolescents wanted counseling were 2 items among all 19 items. In the sexual problem category, 0 item among all 17 items and in the socio-cultural problem category, 2 items were among all 30 items. 3. In the comparison of the female student and male student about the experienced problems and the demands of counseling according to the physical. psychological. sexual and socio-cultural problem categories. There was a significant difference statistically in all categories between groups(P<.001) 4. In the comparison of high school students and middle school students about the demands of counseling according to the physical. psychological. sexual and socio-cultural problem categories(P<.001). Particulary, grade II of high school students have experienced problems according to the physical. psychological. sexual and socio-cultural problem categories. There was a significant difference statistically in all categories(P<.001). 5. In the correlation between the experienced problem and the demands of counseling according to 4 categories. there was the positive correlation at P<.001 level. 6. The less the satisfaction for family and school life. the more experienced problems according to the physical. psychological. sexual and socio-cultural problem categories. There was a significant difference statistically in all categories(P<.001).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.319-325
• /
• 2015

High-strength steel has replaced mild steel as the material of choice for truck decks or frames, owing to the growing demand for lightweight vehicles. Although studies on the weld fatigue characteristics of mild steel are available, studies on high-strength steels have been seldom conducted. In this study, firstly, we surveyed a chosen number of approaches and selected the Radaj method, which uses the notch factor approach, as the one suitable for evaluating the fatigue life of commercial vehicles. Secondly, we obtained the S-N curves of HARDOX and ATOS60 steel welds, and the F-N curves of the T-weld and overlapped-weld structures. Thirdly, we acquired a general S-N curve of welded structures made of high-strength steel from the F-N curve, using the notch factor approach. Fourthly, we extracted the weld fatigue characteristics of high-strength steel and incorporated the results in the database of a commercial fatigue program. Finally, we compared the results of the fatigue test and the CAE prediction of the example case, which demonstrated sufficiently good agreement.

• Fire Science and Engineering
• /
• v.16 no.1
• /
• pp.18-23
• /
• 2002

Efficiency estimation of toxicity free resistance cable experiments were conducts to understand toxicity free fire ersistance polyolefin insulation material and smoke density characteristic and combustion gas corrosion analysis. A main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated fire resistance cable materials. In this paper, Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5$\pm40.04〔w/$\textrm{cm}^2$〕for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. Also, the fire gases was occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC which has high content of carbon in chemical compound.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.334-340
• /
• 2005

This experiment was conducted to evaluate the nutrient loss and to assess the eutrophication into small stream by intensive rains in the steeped cornfield during cultivation. The crop cultivated was a soiling com (DW5969), and the experimental plots were divided into two parts that were 10 and 18% of slope degrees. The amount of T-N and T-P loss was calculated by analysis of surface run-off water quality, and was investigated the effect of eutrophication to small stream as a part of life cycle assessment (LCA) methodology application. For the surface run-off water quality, EC and T-N values were highest in first runoff event as compared to the other events and maintained the stage state with litter variations at every hour during the runoff period except for EC in the slope 18%. However, T-P concentration has been a transient stage after runoff event of July 27. Total surface run-off ratio was not significantly different with slope degrees, but amount of T-N and T-P losses at 18% of slope were high as $5.96kg\;ha^{-1}\;and\;0.65kg\;ha^{-1}$ as relative to 10% of slope degree, respectively. Furthermore, T-N losses from run-off water in the sloped cornfield 10 and 18% were approximately 9.8 and 12.5% of the N applied as fertilizer when the fertilizer applied at recommended rates after soil test, respectively. For the eutrophication impact to the small stream, it was shown that $PO_4$ equivalence and Eco-indicator value at 18% of slope degree were greater as much $6.11kg\;ha^{-1}$ and 0.81 as compared to the slope angle 10%, respectively. Therefore, it was appeared that each effect of nutrient losses, eutrophication and Eco-indicator value was enhanced according with higher slope degree.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.418-428
• /
• 2015

This study conducted influencing and mediated effect on stroke to lead correct health behavior of stroke patients and tried to provide preliminary data of stroke prevention. It used stage 4 and 5 data of a national health and nutrition examination survey, analysis method was frequency analysis, Chi-square test, multiple logistic regression and structural equation modeling. In case of male, factors affecting to stroke were age, job, self-related health, alcohol, hypertention and diabetes. In case of female, age, job, self-related health, stress level and hypertention affected to stroke. In tested results on whether or not mediated effect of preceding disease exists, 5.80 difference in ${\chi}^2$ between partial mediated modeling and full mediated modeling was statistically significant(p<0.01). Therefore, partial mediated modeling was adequate to this study. We need preventive health education for changing wrong health behaviors and policy that strengthens health care network. If someone has preceding disease, they need long-term diagnosis for health condition and continuous improvement in life style.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.

• Archives of design research
• /
• v.11 no.3
• /
• pp.101-110
• /
• 1998

It is impossible that the corporation can make up good corporate images with sales promoting and pursuing profits only. To form impressive oorporate images, the corporation should acquire efficient marketing images and social oonfidences with the investment for the culture, the art, the preservation of public health, educations and social welfare programs. The oorporate image is indined to be formed by audiences subjectively even though the corporation makes great efforts to have its unique images. The audience has a tendency to have their subjective opinions about the corporate image based on several informations communicated by the corporation and various sources. The sensitive approach and emotional persuation can be efficient for making good corporate images because corporate images of audiences arise from emotional and sensitive factors rather than rational ones. There are many previous studies verifying that the humor effect should be one of powerful means for inducing concentrations, memorizations and persuations. The majority of popular advertisings are humor touched one and the questionaire proves that almost all university students participating sample test, prefer humorous advertisings to serious advertisings. The questionaire verifies that it is a most efficient method is using humor effects at product advertising to improve the corporate image indirectly. And there are very possitive reactions about applying humor effects for the corporate image advertising and the other advertisement types such as pamphlets and catalogues. The humor effect motivates the persuation with spiritual pleasures and intimacy, and it minimize the negative aspects of advertising for the formation of the corporate image. The humor effect is valuable not only for the formation of the corporate image reflecting the entity of the oorporation itself but also for the ideation of advertising communications. The study on the humor effect related with the corporate image is significant because the humor is a different version of the humanism based on deep oontemplation and oomprehension of human life rather than simple means to motivate laughers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.372-379
• /
• 2017

Software reliability factor during the software development process is elementary. Case of the infinite failure NHPP for identifying software failure, the occurrence rates per fault (hazard function) have the characteristic point that is constant, increases and decreases. In this paper, we propose a reliability model using the chi - square distribution which depends on the degree of freedom that represents the application efficiency of software reliability. Algorithm to estimate the parameters used to the maximum likelihood estimator and bisection method, a model selection based on the mean square error (MSE) and coefficient of determination($R^2$), for the sake of the efficient model, were employed. For the reliability model using the proposed degree of freedom of the chi - square distribution, the failure analysis using the actual failure interval data was applied. Fault data analysis is compared with the intensity function using the degree of freedom of the chi - square distribution. For the insurance about the reliability of a data, the Laplace trend test was employed. In this study, the chi-square distribution model depends on the degree of freedom, is also efficient about reliability because have the coefficient of determination is 90% or more, in the ground of the basic model, can used as a applied model. From this paper, the software development designer must be applied life distribution by the applied basic knowledge of the software to confirm failure modes which may be applied.

• Journal of Biosystems Engineering
• /
• v.43 no.1
• /
• pp.72-80
• /
• 2018

Purpose: A modern greenhouse consists of various Information and Communications Technology (ICT) components e.g., sensor nodes, actuator nodes, gateways, controllers, and operating softwarethat communicate with each other. The interoperability between these components is an essential characteristic for any greenhouse control system. A greenhouse control system could not work unless the components communicate via common interfaces. The TTAK.KO-06.0288 is an interface standard consisting of four parts. Notably, TTAK.KO-06.0288-Part3, which describes the interface between a greenhouse operating system (GOS) and a greenhouse control gateway (GCG), is the core standard of TTAK.KO-06.0288. The objectives of this study were to analyze the TTAK.KO-06.0288-Part3 standard, to suggest alternative solutions for identified issues, and to develop a library as a proof of the alternative solutions. Methods: The "data field" was analyzed using a comparative analysis method, since it is a data transmission unit of TTAK.KO-06.0288-Part3. It was compared with other parts of TTAK.KO-06.0288 in terms of definition, format, size, and possible values. Although TTAK.KO-06.0288-Part1 and TTAK.KO-06.0288-Part2 do not use a "data field," they have a similar data structure. That structure was compared with the "data field" of TTAK.KO-06.0288-Part3. Results: Twenty-one issues were identified across four categories: inter-standard issues, intra-standard issues, operational issues, and misprint issues. Since some of the issues can raise interoperability problems, 16 alternative solutions were suggested. In order to prove the alternative solutions, an open-source communication library called libtp3 was developed. The library passed 14 unit tests and was adapted to two research. Conclusions: Although TTAK.KO-06.0288-Part3 is an interface standard for communication between a GOS and a GCG, it might not communicate between different implementations because of the identified issues in the standard. These issues could be solved by the alternative solutions, which could be used to revise TTAK.KO-06.0288. In addition, a relevant organization should develop a program for compatibility testing and should pursue test products for smart greenhouses.