• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1405-1405
• /
• 2011

Sudden earthquake is changing national energy stratagem for future energy resource. In case Germany, current nuke power station will be shut down with several decades. Newly constructed build in Japan must have photovoltaic system as a obligations.. As a long-term sustainable energy one, PV should give confidence to customers up to more than 20 years. Today, IEC 61215 and IEC 61646 standards are representative one for ensuring performance and safety of PV module. But it is still needed to develop more realistic test method. For example, if we think about extreme condition like desert and North Pole, the temperature condition describe in test standards can have little effect on life time expectation of PV module. Installation speed of PV system is very high, but establishing test standards are very complex and not easy. So in this paper, I tried to open the long-term test method for PV module to ensure 25 year's old life time. It is just starting point of PV related long-term test methods. The specific and technical explanation will be shown in the following paper in detail.

• 산업기술연구
• /
• 제23권A호
• /
• pp.139-147
• /
• 2003

The purpose of this study was to investigate and analyze the fatigue test data of pavement concrete. The static strength tests were carried out to check the compressive strength, flexural strength, and split tension strength at 56 days in order to minimize strength variation effect during test. The specimens were fabricated at twelves sections at a construction site of highway. The stress level and stress ratio of fatigue test were determined from static test results. The results are as follow: The flexural strength at 28 days mostly satisfied the criterion for design, but the compressive strength at 28 days were slightly below the criterion even though it satisfied at 56 days. The fatigue limit was 2 million cycles if the specimen was not failed to that cycles. The S-N curves were developed from the fatigue test results at each stress levels and each stress ratio. Then, the fatigue life of pavement concrete at a given stress level and fatigue strength of pavement concrete could be derived from these curves. Analysis using method No.2 was more acceptable because resulting of comparison and analysis using method No.2 was presented 2 sections were presented $R^2$ < 0.7, and other 2 sections were presented 0.7 < $R^2$ < 0.8, and the others 8 sections were $R^2{\geq}0.8$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.8-14
• /
• 2009

Corrugated fiberboard is a widely used packaging material because of its high compressive strength and stiffness despite light weight. Corrugated fiberboards with microflutes with height $\leq$ 1.5 mm, such as E, F or G, have been developed. As microflutes have a different geometry from other conventional flutes, they may behave differently in testing and require a new testing method. Therefore, we evaluated the flat crush resistance of corrugated fiberboard with microflutes according to the ISO and TAPPI standard test methods. In addition, the effects of specimen area and platen compression rate were examined. The goal of this study was to identify an appropriate method for flat crush test (FCT) of corrugated fiberboard with microflutes. When a test piece with a standard area was subjected to the FCT in accordance with ISO and TAPPI methods, microflute corrugated fiberboard demonstrated a different load-displacement curve. An area of 20 $cm^2$ was determined to be the most appropriate for FCTof microflute corrugated fiberboard.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.96-100
• /
• 2002

The purpose of this paper is presented a rational method of predicting dynamic/impact tensile strength of high tensile steel materials widely used fur structural material of automobiles. It is known that the ultimate strength is related with the loading speed and the Lethargy Coefficient from the tensile test. The Dynamic Lethargy Coefficient is proportional to the disorientation of the molecular structure and indicates the magnitude of defects resulting from the probability of breaking the bonds responsible for its strength. The coefficient is obtained from the simple tensile test such as failure time and stresses at fracture. These factors not only affect the static strength but also have a great influence on the dynamic/impact characteristics of the joist and the adjacent structures. This strength is used to analyze the failure life prediction of mechanical system by virtue of its material fracture. The impact tensile test is performed to evaluate the life parameters due to loading speed with the proposed method. Also the evaluation of the dynamic/impact effect on the material tensile strength characteristics is compared with the result of Campbell-Cooper equation to verify the proposed method.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.397-403
• /
• 2015

본 논문은 개발 중에 있는 굴삭기 무인조종 로봇을 대상으로 시스템 신뢰도 평가 방법을 제안하고, 제안한 방법을 이용하여 수행한 신뢰도 보증시험에 대한 결과를 나타낸다. 로봇 시스템은 위험한 작업환경에서 작업자의 안전을 위하여 개발되었으며 전체 시스템의 신뢰도는 각 구성품의 신뢰도로부터 계산될 수 있다. 따라서 세 가지 주요 구성품 각각에 대한 전용 시험 장비를 제작하여 가속수명시험에 사용하였다. 가속수명시험 결과를 이용하여 신뢰수준에 따른 보증할 수 있는 평균수명을 추정하고, 적은 시료 수를 사용하는 시스템 신뢰도 보증 시험법을 제안하였다.

• International Journal of Contents
• /
• 제13권4호
• /
• pp.16-22
• /
• 2017

The purpose of this study was to investigate the daily life experiences of medical students and to explore gender differences in these experiences using the Experience Sampling Method (ESM) as the method. The instrument, the Experience Sampling Form (ESF), consisted of questions on the external and internal experiences of the respondents. Data were collected from 2,035 ESFs by 91 students (male=52, female=39) at three medical schools for one week. The data was analyzed using the statistical tests of the t-test and ${\chi}^2$ test. Activity places were significantly different by gender (${\chi}^2=16.576$, p=.001). Males spent more time in learning places such as schools, libraries, etc., whereas females spent their time in personal places, including their homes, dormitories, etc. Males undertook more learning activities than did females, and females undertook more social/leisure activities and basic life activities than did male students (${\chi}^2=18.753$, p=.001). They were in a learning place and performing learning activities. There were significant perceptual differences between males and females about their flow levels, competency levels, and difficulty levels, based on the activity type. These results can help us to understand the daily lives of medical students and can be useful in developing counseling programs and educational activities for students.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1667-1672
• /
• 2007

In order to assess the reliability of the exhaust bellows for automobiles, accelerated life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; i) the main failure mechanism is crack or breakage of inner flexible tube by shaken displacement at shear direction. ii) temperature is a second factor to affect a failure. iii) the life distribution of exhaust bellows is fitted well to Weibull life distribution and the shape parameter is 13.3 on condition of shaken displacement and $600^{\circ}C$

• 한국의류학회지
• /
• 제13권3호
• /
• pp.197-206
• /
• 1989

This study was to investigate brand images of ladies wear and the effects of fashion advertisements, and to determine the difference of brand image preference and the effects of fashion advertising by clothing life style. 421 subjects were gathered through stratified sampling method and, for data analysis, frequency distribution, $x^2-test$, Cronbach'$\alpha$, ANOVA, Duncan's multiple Range test, Multiple Dimentional Scaling (M.D.S.), Factor analysis, Cluster analysis, were conducted. The results are as follows; 1. In image formation process, feminine as formal image, manish as casual image, were recognized. 2. Four factors were determined for analysis of clothing life styles and with these factors five different clothing life style groups were classified. 3. There was a meaningful difference between clothing life style and brand image preference, and also between clothing life style and the effects of fashion advertisement. From these findings, general and specific fashion advertising strategies are proposed.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.45-53
• /
• 2009

In this study, Finite Element Analysis (FEA) was used to decide three kinds of material property of vibration proof rubber with the unique characteristic of non-linear and large deformation. As well, three types of hardness (Hs 50, 55, 60) were compared with the result of fatigue tests, fatigue life was able to be predicted. The request for fatigue life becomes strict more and more as increasing stress under conditions like a compaction, high load and high temperature for parts because it is main characteristics of rubber mount for automotive. Regarding to the fatigue life under dynamic deformation condition, it can be predicted as checking forced deformation extends and its frequency and its strain-life curve. As for material property tests of uniaxial tension test, uniaxial compression test, pure shear test, Ogden model was used for FEA by observing relations between stress and strain's rate as curve fitting. As a result of FEA, fatigue life for rubber mount was predicted and accorded well with the experimental data of fatigue test with hourglass specimens. In addition, its property of the predictable fatigue life method suggested in this study was accorded well with the experimental data by comparing the predicted fatigue life of FEA with the result of fatigue test for rubber component of engine rubber mount.