• 한국주거학회논문집
• /
• 제24권4호
• /
• pp.53-60
• /
• 2013

Apartments amount to 58.3%, the highest proportion of domestic housing types. These apartments' lifespan (approximately 27 years) are one-third of the developed countries' housing lifespan due to the property developers and mass production. It is significantly short-cycle period considering the original physical lifespan of the apartment housing are 60 years. It has caused economic loss and environmental degradation. In recent years, research and development for the long life of the apartment housing has been actively performed, but it is limited on reconstruction and new construction. Reconstruction of existing a number of high-rise apartments is difficult owing to restrictions on the floor area ratio allowing for 40 years limit of decay resistance after the completion. Improving lifespan of the building has recently begun to receive attention as an alternative to remodeling. However, These sort of remodeling techniques tend to be focused on technology developed for the physical life extension. That means developing the techniques about dwelling-unit environment for residents satisfaction are required as well as improving physical construction. The purpose of this study is to propose and verify the Participatory Design Technique which can help the residents as the active participation in the design decision-making process.

• Wind and Structures
• /
• 제5권6호
• /
• pp.527-542
• /
• 2002

Wind-excited vibrations of slender structures can induce fatigue damage and cause structural failure without exceeding ultimate limit state. Unfortunately, the growing importance of this problem is coupled with an evident lack of simple calculation criteria. This paper proposes a mathematical method for evaluating the crosswind fatigue of slender vertical structures, which represents the dual formulation of a parallel method that the authors recently developed with regard to alongwind vibrations. It takes into account the probability distribution of the mean wind velocity at the structural site. The aerodynamic crosswind actions on the stationary structure are caused by the vortex shedding and by the lateral turbulence, both schematised by spectral models. The structural response in the small displacement regime is expressed in closed form by considering only the contribution of the first vibration mode. The stress cycle counting is based on a probabilistic method for narrow-band processes and leads to analytical formulae of the stress cycles histogram, of the accumulated damage and of the fatigue life. The extension of this procedure to take into account aeroelastic vibrations due to lock-in is carried out by means of ESDU method. The examples point out the great importance of vortex shedding and especially of lock-in concerning fatigue.

• 한국응용곤충학회지
• /
• 제51권2호
• /
• pp.141-148
• /
• 2012

본 실험은 2011년 전남 구례지역의 산수유, 감, 밤 등에 대발생하여 피해가 심한 갈색날개매미충의 기주식물, 산란특성, 형태적 특징, 생활환을 조사하고 친환경 방제자재 선발을 위하여 수행하였다. 갈색날개매미충의 기주식물은 목본류 32종, 초본류 19종을 포함한 51종이였으며, 산란 선호식물은 산수유, 감나무, 밤나무, 두충나무, 때죽나무였다. 알은 길이 1.24 mm, 폭 0.55 mm 의 장타원형으로 1년생 가지 속에 난괴 당 평균 28.8개의 알을 산란하였다. 약충은 4회 탈피하는데 항문 주변에 x자 모양의 흰색 또는 노랑색 밀납물질을 형성한다. 전남 구례지역에서 연 1세대 발생하며 알로 월동하여 부화시기는 5월 중순~6월 상순, 약충시기는 5월 중순~8월 중순, 성충은 7월 중순~11월 중순이며 알은 8월 중순부터 산란한다. 갈색날개매미충은 산란에 의한 1년생 가지 고사, 양분흡즙으로 인한 생육저해, 그을음병 유발에 의한 상품성을 하락시키는 피해를 준다. 갈색날개매미충 약충과 성충 방제에 효과적인 친환경자재는 고삼추출물제와 천연식물추출물제로 살충율이 80% 이상이었다.

• 미생물학회지
• /
• 제43권4호
• /
• pp.264-272
• /
• 2007

인간면역결핍바이러스(Human Immunodeficiency Virus; HIV) 진단을 위한 초고속 실시간 PCR법을 개발하였다. 검출 대상의 DNA 염기서열은 495염기 HIV-1 특이 env 유전자(gi_l184090)및 294염기 HIV-2 특이 env 유전자(gi_1332355)를 사용하였다. 초고속 실시간 PCR은 microchip에 $6\;{\mu}l$의 PCR 용액을 탑재하는 $Genspector^{TM}$ (Samsung, Korea)을 사용하였으며, PCR의 각 회전 중 단지 두 단계(denaturation, annealing/extension)를 극단적으로 짧은 시간을 주어 수행하게 하였다. 융점분석을 포함한 30회전의 PCR 검색 시간은 총7분30초 이내에 완료되었으며, HIV-1 특이 117염기와 HIV-2 특이 119염기의 PCR산물은 최소 $2.3{\times}10^3$개의 각 env 유전자로부터 30회전의 2단계 초고속 PCR에 의해 성공적으로 증폭시킬 수 있었다. 이러한 초고속 실시간 PCR법은 HIV의 빠른검색뿐 아니라, 다른 병원채의 빠른 검색에도 유용하계 적용될 수 있을 것이다.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1919-1931
• /
• 2005

Human joint motion can be kinematically described in three planes, typically the frontal, sagittal, and transverse, and related to experimentally measured data. The selection of reference systems is a prerequisite for accurate kinematic analysis and resulting development of the equations of motion. Moreover, the development of analysis techniques for the minimization of errors, due to skin movement or body deformation, during experiments involving human locomotion is a critically important step, without which accurate results in this type of experiment are an impossibility. The traditional kinematic analysis method is the Angular-based method (ABM), which utilizes the Euler angle or the Bryant angle. However, this analysis method tends to increase cumulative errors due to skin movement. Therefore, the objective of this study was to propose a new kinematic analysis method, Position-based method (PBM), which directly applies position displacement data to represent locomotion. The PBM presented here was designed to minimize cumulative errors via considerations of angle changes and translational motion between markers occurring due to skin movements. In order to verify the efficacy and accuracy of the developed PBM, the mean value of joint dislocation at the knee during one gait cycle and the pattern of three dimensional translation motion of the tibiofemoral joint at the knee, in both flexion and extension, were accessed via ABM and via new method, PBM, with a Local Reference system (LRS) and Segmental Reference system (SRS), and then the data were compared between the two techniques. Our results indicate that the proposed PBM resulted in improved accuracy in terms of motion analysis, as compared to ABM, with the LRS and SRS.

• Weed & Turfgrass Science
• /
• 제3권2호
• /
• pp.78-85
• /
• 2014

충북지역의 이앙재배 논의 잡초 분포 현황을 조사하기 위하여 2013년 충북지역 12개 시 군의 346지점에 대한 잡초 발행 분포를 조사한 결과를 요약하면 다음과 같다. 충북지역 논에 발생하는 잡초는 모두 15개과 43초종이었고 과별 우점도는 방동사니과 21.5%로 가장 높았고 그뒤로, 화본과 17.4%, 물옥잠과 15.5%, 국화과 12.7%순이었다. 충북지역에서는 1년생 잡초는 32초종, 다년생 초종이 11종 분포하였고, 발생비율은 일년생이 71.3%, 다년생이 28.1%로 일년생잡초 발생 비율이 높았다. 충북지역 우점잡초는 물달개비(14.5%), 올챙이고랭이(10.5%), 강피(9.3%), 올방개(7.0%), 자귀(6.2%), 순이었다. 그 외의 지역은 모두 물달개비가 가장 우점하는 초종으로 조사되었다. TWINSPAN 분석을 통한 시 군의 잡초 유사성 분석 결과 개여뀌, 사마귀풀, 고마리, 바람하늘지기, 올챙이솔, 바랭이, 가래, 나도방동사니가 시 군을 구별하는 지표종으로 영향을 미쳐 이 초종의 출현 유무에 따라 지역별 논 잡초 유사성을 비교할 수 있었다. 이러한 정보를 이용하여 충북지역 잡초발생을 예측하고, 이에 맞는 잡초 관리방안을 수립할 수 있을 것으로 판단된다.

• 한국CDE학회논문집
• /
• 제12권1호
• /
• pp.74-85
• /
• 2007

During the lifecycle of a nuclear power plant many organizations are involved in KOREA. Korea Plant Engineering Co. (KOPEC) participates in the design stage, Korea Hydraulic and Nuclear Power (KHNP) operates and manages all nuclear power plants in KOREA, Dusan Heavy Industries manufactures the main equipment, and a construction company constructs the plant. Even though each organization has a digital data management system inside and obtains a certain level of automation, data sharing among organizations is poor. KHNP gets drawing and technical specifications from KOPEC in the form of paper. It results in manual re-work of definition and there are potential errors in the process. A data warehouse based on a neutral model has been constructed in order to make an information bridge between design and O&M phases. GPM(generic product model), a data model from Hitachi, Japan is addressed and extended in this study. GPM has a similar architecture with ISO 15926 "life cycle data for process plant". The extension is oriented to nuclear power plants. This paper introduces some of implementation results: 1) 2D piping and instrument diagram (P&ID) and 3D CAD model exchanges and their visualization; 2) Interface between GPM-based data warehouse and KHNP ERP system.

• 한국농촌건축학회논문집
• /
• 제17권4호
• /
• pp.57-65
• /
• 2015

In contrast to apartments, detached houses offer the possibility of more than one entrance connecting interior and exterior spaces. This study examines the location, function, and use of second doors in detached houses in rural areas. The study employs survey and interviews conducted in 2015, focusing on 18 detached houses among 40 houses previously surveyed in 1995. In 1995, 21 second doors were found, while in 2015, 19 were found. The study led to the following conclusions. First, most houses did have second doors installed by 1995 or 2015. Second doors tended to be installed in kitchen and utility rooms. The function of second doors was most closely connected to the kitchen because utility rooms were placed adjacent to kitchens. Secondly, changes in the use and number of second doors were changes in family life cycle and composition, the need for new equipment facilities, the use of new architectural materials, and the installation of new second doors for extension of space. Finally, exterior spaces accessed by second doors tend to be a meeting of semi-interior or semi-exterior space and exterior space only. Those spaces tended to be designed for kitchen fixtures or to support kitchen activities.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.32.1-32.1
• /
• 2008

It is well known that solar and space weather activities can influence the performance and reliability of modern technological system and can endanger human life. Since 2007, the Korea Astronomy and Space Science Institute (KASI) has initiated a research project for the construction of Korean Space Weather Prediction Center (K-SWPC) to make preparations for the next solar cycle maximum (~2012). In this talk, we briefly introduce the current progress of KASI activities for K-SWPC; extension of ground observation system, construction of space weather database and network, development of prediction models, and space weather effects. In addition, future plans for KSWPC will be discussed.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.930-937
• /
• 2003

The extension of design life among power plants is increasingly becoming a world-wide trend. Kori #1 unit in Korea is operating two cycle. It has two man-ways for tube inspection in a steam generator which is one of the important components in a nuclear power plant. Especially, stud bolts fur man-way cover have damaged by disassembly and assembly several times and degradation for bolt materials for long term operation. It should be evaluated and compared by ASME Code criteria for integrity evaluation. Integrity evaluation criteria which has been made by the manufacturer is not applied on the stud bolts of nuclear pressure vessels directly because it is controlled by the yield stress of ASME Code. It can apply evaluation criteria through FEM analysis to damaged female threads and to evaluated safety fer helical-coil method which is used according to Code Case-N-496-1. From analysis results, we found .that it is the same results between stress intensity which got from FEM analysis on damaged female threads over 10％ by manufacture integrity criteria and 2／3 yield strength criteria on ASME Code. It was also confirmed that the helical-coil repair method would be safe.