• Steel and Composite Structures
• /
• 제43권4호
• /
• pp.465-481
• /
• 2022

This paper presents a comprehensive integrity assessment of welded structural components, including uniform high- and low-cycle fatigue assessment of welded plate joints and fatigue-induced fracture assessment of welded plate joints. This study reports a series of fatigue and fracture tests of welded plate joints under three-point bending. To unify the assessment protocol for high- and low-cycle fatigue of welded plate joints, this study develops a numerical damage assessment framework for both high- and low-cycle fatigue. The calibrated damage material parameters are validated through the smooth coupon specimens. The proposed damage-based fatigue assessment approach describes, with reasonable accuracy, the total fatigue life of welded plate joints under high- and low-cycle fatigue actions. Subsequently, the study performs a tearing assessment on the ductile crack extension of the fatigue-induced crack. The tearing assessment diagram derives from the load-deformation curve of a single-edge notched bend, SE(B) specimen and successfully predicts the load-crack extension relation for the reported welded plate joints during the stable tearing process.

• 자원ㆍ환경경제연구
• /
• 제27권2호
• /
• pp.261-286
• /
• 2018

본 논문은 제 7차 전력수급기본계획에서 제시한 신규 원자력발전, 석탄 발전, 그리고 LNG 복합 발전의 균등화발전비용과, 고리 1호기(가압형 경수로, PWR) 및 월성 1호기(가압형 중수로, PHWR)의 계속운전 기간별(10년과 20년) 균등화발전비용을 추정하여 비교해서 원전 계속운전의 노형별 및 계속운전 기간별 경제성을 평가하였다. 균등화발전비용을 이용한 원자력 발전의 계속운전 경제성은 노형, 계속운전기간, 할인율, 이용률 등으로부터 영향을 받는다. 분석결과에 따르면 가압형 경수로(고리 1호)는 가압형 중수로(월성 1호)보다 경제성이 높다. 원자력발전의 계속운전과 다른 전원의 경제성 비교 결과를 보면 가압형 경수로(고리 1호)의 경우에 20년 계속운전이 신규 원자력 발전 및 석탄발전보다 경제적이다. 그러나 가압형 중수로(월성 1호)의 경우에 20년 계속운전은 LNG 복합 발전보다 경제적이지만, 신규 원전 및 신규 석탄발전보다 비경제적이다. 원자력발전의 계속운전에서 보면 20년 계속운전이 경제적이며, 특히 가압형 경수로는 다른 전원보다 비용효율적이다. 원자력발전의 계속운전 정책은 모든 원전을 폐로하기 보다는 안전성과 경제성을 동시에 고려하는 선별적 접근 방식이 유효하다.

• 농촌지도와개발
• /
• 제10권1호
• /
• pp.1-14
• /
• 2003

This study proposes strategies for information requirements analysis (IRA) for successful agricultural management information system (MIS) development. The study frist defines IRA based on literature review and emphasizes the importance of IRA by its position in SDLC (System Developments Life Cycle). Then, the study reviews fifteen cases of agricultural MIS development projects appeared in the report of all the MIS related ARPC(Agricultural R&D Promotion Center) projects from 1995 to 1998 and finds that IRA is not properly performed in most of the projects. Finally, this study proposes seven strategies for IRA for successful agricultural MIS development based on the finding of this study and those from the literature related to IRA methods.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.515-519
• /
• 1997

The purpose of this study is to reduce the fast neutron fluence at the reactor pressure vessel(RPV) and to provide a basis for plant-life extension. In this study, different neutron absorbers were employed in the core outer assemblies of Kori Unit 1 Cycle 14. The modified assemblies were used to calculate fast neutron fluence at the RPV and to evaluate reduction of outer assembly power and total power in core. By comparison with the case of no suppression fixture, the fast neutron fluence of a case with two rows stainless steel around the assembly with natural uranium pins is decreased by 85.8%. It is noted that the modification of outer assembly is more efficient than the previous low leakage loading pattern (LLLP) applied to Kori Unit 1. Also, compared fast neutron fluence in Cycle 1 with Cycle 14, fast neutron fluence at the RPV between Cycle 1 and Cycle 14 is not significantly different. It is found that LLLP applied to the Kori Unit 1 has not contributed to fast neutron fluence reduction at the RPV.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.122-129
• /
• 2004

In plastic working, as working becomes speedy, automatic and working condition deteriorates, the increase of forging working has been remarkable. Therefore, we need the estimation of mold lift in detail, in order to counterplan of effective mold life extension. In this study, on the SKH51, mold steel which is forged by cold working and the KCW1, tool steel of low alloy, we estimated mold life on the base of FEM analysis and investigated mold lift by low cycle fatigue test. Also, this paper suggested a new method of estimation of mold lift.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1103-1107
• /
• 2016

The automatic tensioning device of the catenary system constantly maintains the tension of the trolley wire by absorbing the variations due to the elasticity of the line caused by temperature variation. The tension plays an important role in affecting the electric motorcar operation directly. This paper suggests the methodology of the life cycle extension and the maintenance of the automatic tensioning device by means of performance diagnosis of the pulley type automatic tensioning device which has been commonly used for the electric railway system. Through conducting performance diagnosis and comparative test for the wornout pulley type automatic tensioning device by replacing the components such as the bearing and the bearing shaft without replacing all the assembly, the tensioning device is analyzed whether it is properly functioned. Provided that the maintenance regulation is reinforced so as to implement the bearing replacement through periodical precise inspection along with random check-up inspection which is now carried out by the operating organizations, it is ensured that the life cycle extension and the reduction of maintenance cost of the tensioning device could be achieved.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권5_6호
• /
• pp.503-514
• /
• 2003

폭포수 모형을 기반으로 하는 구조적 개발 방법론에서는 요구 분석 단계에서 요구 사항들이 일단 명세화되고 나면, 이들은 단지 후속의 개발 단계를 위한 중간 산출물로만 사용되고 더 이상 요구 사항 자체를 관리 대상으로 취급하지 않기 때문에 설계 단계 이후에 발생하는 요구 사항의 변경을 관리할 수 있는 절차가 미흡하다. 그러나 현실적으로는 정보 기술의 발전, 시장 환경이나 적용 환경의 변화 등으로 인하여 개발 기간 중 요구 사항은 끊임없이 변화하게 된다. 따라서 이러한 요구 사항의 지속적인 변경을 지원하기 위해서는 전체 개발 생명 주기에 걸쳐 요구 사항을 관리하고 특히 설계 단계 이후의 요구 사항 변경을 지원할 수 있는 요구 사항 변경 관리 프로세스가 필요하다. 이 논문에서는 하향식(top-down)의 구조적 개발 방법론에 적용할 수 있는 요구 사항 변경 관리 프로세스 모델을 제안하여 설계 단계 이후에 발생하는 요구 사항의 변경을 체계적으로 관리하고 요구 사항 자체를 모든 개발 생명 주기에서 활용하기 위한 방안을 제시한다. 제안 프로세스는 마르미 방법론의 개발 프로세스와 산출물 측면의 적용 검토를 통하여 개발 방법론의 요구 사항 변경 및 관리에 대한 개선 효과를 평가한다.

• 패션비즈니스
• /
• 제27권4호
• /
• pp.1-20
• /
• 2023

This study proposes the practical design elements of sustainable fashion by understanding the values of the MZ generation and analyzing the design characteristics that can extend the life of clothing. The theoretical concept of sustainable fashion through previous studies was reviewed and in-depth interviews were conducted with the MZ generation on "design characteristics of clothes that they have actually used for a long time." The result was drawn by approaching the constant comparison method through the qualitative methodology. As a result of the study, the design characteristics of clothes that can be worn for a long time are as follows. First, simple design pursues simplicity that is not excessive to the essential characteristics of clothes. Second, sturdy material is durable and not easily damaged. The clothing storage method and laundry method were also factors that could extend the life of the garment. Third, emotional design is a design that fits well with your mood and body type and gives a special meaning to your emotions. This study is meaningful in suggesting elements necessary for extending the life cycle of clothing and providing basic data that can be applied to the practical design steps of the fashion industry.

• 한국의상디자인학회지
• /
• 제19권2호
• /
• pp.1-14
• /
• 2017

The consumption trend of fashion in modern industrial society is developing from the rapid changes, and the lifespan of fashion products becomes shorter due to the various industrial wastes. Due to the attitude change caused by the ethical consumption consciousness and environment awareness, the up-cycle fashion products got to receive attention, and it is in the limelight as a new trend to realize the sustainable fashion products in the domestic and foreign fashion. The purpose of this study lies in drawing the expression characteristics by investigating and analyzing the cases of each type on the fashion bag products of up-cycle brand, and contributing to the diversification of product family fitting to the characteristics of fashion bag product of up-cycle brand, systematic strategies of up-cycle fashion products, and activation of up-cycle fashion market. In research methods, the theatrical researches were conducted centered the relevant domestic literature materials, preceding papers, etc., which ran paralleled with the actual case analysis study. Through the preceding research and websites related to selected products, websites of up-cycle companies, relevant books, related articles, etc., the expression characteristics of up-cycle fashion bag products were drawn. The results of this study are as follows: First, as it has the feature of historicality, the designs can be created by containing the designer's story, story of materials, and consumer's story. Second, since it has the characteristic of sustainability, the application of manufacturing process and materials, extension of product life, conversion of original material's function, etc. can be sustainable. Third, as it's a trait of scarcity, all products may be produced by hand, and it can have the specialty which the original materials have. Fourth, since it has an eco-friendly trait, even while saving the original materials, the aesthetic needs could be met according to the consumers' continuous demand.

• 한국CDE학회논문집
• /
• 제13권5호
• /
• pp.352-361
• /
• 2008

Architectural design work depends on information made from earlier phases such as feasibility study, planning, and conceptual design. This design guideline information includes design objectives, requirements, and constraints made by decision-making, and has great influence on various works of latter phases of design process. Despite of this cognition, however, the lack of design guideline information management still remains as one among the critical issues in design area. Design tools with design guideline information do not also address the issue of interoperability throughout the life-cycle of buildings. The purpose of this research is to propose a method for design guideline information management by using the IFC technology and IFC Property set (Pset) extension mechanism. The method comprises defining and mapping the practically used design guideline items and extensible IFC data model, and includes the management of relationships that exist between design guideline information and design model in the IFC data model.