• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.394-399
• /
• 2009

Since some decades ago, there has been a concern for resource depletion and environmental pollution associated with building properties. In addressing such impact of the built environment, there is a recognition of the existence of alternative building materials, fuels for energy supply as well as technologies for waste handling and disposal. Nevertheless, for long time, the choice between such alternatives was dictated by factors such as differences in prices and aesthetic values. A new important dimension in discriminating between different options is the environmental dimension. This aspect is important since buildings are one of the spatially big new additions to the natural environment that consume a lot of materials and energy during their long lifetime. Thus, with the environmental dimension kept in mind, a existing cost estimation needs to be changed. A new cost assessment method, Life Cycle Cost, should calculate overall costs with dimensional factors: investment and utility costs as well as maintenance costs over the lifetime of the building. Aiming to give an overview of the present status of Building Life Cycle Assessment(LCA) tools as a basis for further research and development including economic performance, this paper describes and compares 3 different tools for Life Cycle Assessment(LCA) and economic analysis of the green buildings. This paper compared these approaches based on various aspects. These include economic analysis method, evaluation duration, data of results(index). Use of the comparison analysis is to produce a better picture and indicate profits and shortcomings for the tools as a group; thus providing important direction improvement of LCA tool as well as further research and development of this group of tools.

• 인터넷정보학회논문지
• /
• 제10권4호
• /
• pp.115-126
• /
• 2009

소프트웨어 규모 추정은 소프트웨어 Life-Cycle 초기에 분석되어 규모와 비용의 예측에 도움을 주어야 한다. 2004년 소프트웨어 사업대가 기준에 국제표준에 기반한 기능점수 방식이 도입된 후 사용자 입장에서 소프트웨어의 규모를 바라보고 비용을 산정하는 기반이 마련되었다. 그러나 현재의 기능 점수 측정 방식은 익숙하지 않은 일반 사용자가 접근하기 쉽지 않고, 모든 시스템 및 기능의 복잡도 가중치가 획일화되어 있어 내부 계산 로직이 복잡한 공학용 소프트웨어나 과학계산용, 시뮬레이션 소프트웨어에 대한 산정 방식에서 그 규모를 적절히 산정하지 못하는 문제점을 안고 있다. 본 논문에서는 기존의 기능점수 측정 절차를 간략화하고 프로젝트 초기에 규모의 추정을 쉽고 빠르게 수행할 수 있는 모델을 제시한다. 또한 특정 조직의 특성을 반영할 수 있는 수학적 가중치 산출 모형을 제시함으로써 고정된 복잡도 가중치에 대한 논란의 여지를 없애고 조직의 데이터가 쌓일수록 해당 조직의 특성을 반영해 나갈 수 있는 수학적 가중치 산출 모형을 제시한다. 제시한 모델은 평가 결과 기존의 FPA(Function Point Analysis) 방식보다 빠르게 규모를 측정할 수 있고 LOC(Line of Code)와의 상관관계도 더 높은 장점이 있다.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.173-177
• /
• 2020

Wastewater treatment plants (WWTPs) have been recognized as one of the significant greenhouse gas (GHG) generators, due to the complex biochemical reaction and huge consumption of energy and materials. Recently, WWTPs have been built underground and they will be confronted with the challenges of mitigating GHG emissions and improving the quality of treated wastewater. Here, we focus on estimating GHG emissions to set up effective management plans for a WWTP built underground. First, we apply the process-based life cycle assessment (LCA) with an inventory database of the underground WWTP for a case study. Then, we identify significant factors affecting GHG emissions during service life using sensitivity analysis and suggest the proper tactics that could properly reduce GHG emissions from the WWTP.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.125-129
• /
• 2007

In this paper, a PMS(Pavement Management System) application is presented to control the LCC(Life Cycle Cost) of road pavement. The aim of this paper is to provide the decision makers with the planning information regarding maintenance strategies for efficient road pavement management. The validity of PMS application presented in this paper is investigated through case studies for conducted for 22 national highway road sections in Korea.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.231-241
• /
• 1999

Recent market competition forces the price to be determined in the design stage so that the design would meet the target price of the product. However, most commercial PDM(Product Data Management) systems currently in use lack such a cost estimation function. In this paper, we propose detailed structure and functions of a new approach to estimate the cost of new products using integrated BOM in PDM. Such system will reduce the total life cycle cost of the products to be designed.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.371-378
• /
• 2006

This study investigates the effects of the material properties and the fatigue behaviors in the SM490A material butt weld specimens due to the heat-treatment and the grinding. In the fatigue behavior, the heat-treatment affects the fatigue life. The S-N curves of both matrix specimen and butt weld specimen are reversed at some cycle by the existence or nonexistence of heat-treatment. The grinding on the bead makes the fatigue limit decrease in the all specimens. But the reinforcement removed, the fatigue limit increases at the high cycle. Also, this study investigates the fatigue life estimation by examining butt weld bead profiles. The butt weld beads, which are welded by semi-robot method, have non-uniform bead profiles described by $\theta,\;\rho$ and h. The stress concentration factors $K_t$, are changed by each different $\theta,\;\rho$ and h from 1.395 to 2.863. Hence, the sensitivity of $K_t$ is changed by each $\theta,\;\rho$ and h. As $\theta$ becomes lower and $\rho$ and h become higher, $K_t$ increases. The fatigue life can he estimated very closely for the AAY specimens without residual stress using only butt weld bead profiles. But, fur the AAN specimens with residual stress, the fatigue life must be estimated by considering both the weld bead profiles and the residual stress data.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.101-108
• /
• 2003

Presented in this paper is the development of an product cost estimation system at the product design stage. The efficient cost estimation function at the design stage is essential for the cost reduction activities through the entire product life cycle. For this purpose, it is necessary to establish a systematic working procedure, and to develop information system for managing a great deal of production and product-related data required for the cost estimation. The developed system has the capability of estimating a cost of assembly type products as well as unit-item type products. As proposed system is based on the variant approach, it can be used easily at an early design stage without the need for detail design information. Also, this system is integrated with legacy PDM (Product Data Management) and ERP (Enterprise Resource Planning) system for fast. accurate and easy product cost estimation. The estimated cost includes material cost, overhead cost as well as labor cost.

• 토지주택연구
• /
• 제12권2호
• /
• pp.109-120
• /
• 2021

미래를 위협하는 요인의 하나로 이산화탄소 증가로 인한 지구온난화가 지적되고 있다. 각 나라들과 각 산업별로 이산화탄소 배출량을 줄이고자 하는 노력을 기울이고 있으며 전과정 평가라는 정량화된 방법으로 구조물 및 건축물의 전과정 동안 발생하는 환경부하 및 환경영향을 정량적으로 평가하고 았다. 하지만 건설분야의 경우에는 LCI DB도 충분히 구축되어 있지 않고 전과정 기간이 매우 길고 구조물 및 건축물도 유일무이한 경우가 많아서 전과정 평가를 수행하는데 많은 노력과 시간이 필요하다. 본 연구에서는 아주 정확한 탄소배출량을 추정하기 보다는 발주가 또는 설계자가 환경부하 저감과 관련한 신속한 의사결정이 필요한 경우에 적은 노력으로 이산화탄소 배출량을 편리하게 추정할 수 있는 간략화된 추정모델을 제시하는 것을 목적으로 하고 있다. 전국 25개 도로현장 데이터를 이용하여 일반적인 LCA를 수행하였으며 수행된 결과를 이용하여 다중회귀분석을 실시하여 간편 추정식을 도출하였다. 간편 추정식으로 산출된 이산화타소 배출량과 일반적인 LCA를 수행하여 추정한 배출량을 비교한 결과 16개 도로현장의 경우에 오차율이 5% 미만으로 의미있는 결과가 도출되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.384-389
• /
• 2008

An accelerated fatigue test is essentially required to maintain the reliability of the actual structure of KTX under operation conditions. However, actual fatigue life cannot be obtained if specimens are not adequate to the conventional fatigue test. Moreover component maker did not provide data of loading stress (S) - cycles at the failure (N). In this study, we suggest a prediction method of the S-N curve for establishing an accelerating test under various load levels. Load history was acquired from the field tests. A Rainflow method was used on the cycle counting of the field load data, and then, an S-N curve was obtained through the iteration process under the condition that the damage index satisfies to 1 in the Miner's rule.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.150-156
• /
• 2004

Though the concept of Life-Cycle Cost (LCC) itself is not new, its effectiveness for planning, design, rehabilitation and maintenance/management of civil infrastructures is becoming increasingly recognized. For the decision problems as in the case of the LCC of plant facilities, equipments, bridge decks, pavements, etc., the Life-Cycle Cost Analysis (LCCA) is relatively simple, and thus its practical implementation is rather straightforward. However, when it comes to major infrastructures such as bridge, tunnels, underground facilities, etc., the LCCA problem becomes extremely complex because lack of cost data associated with various direct and indirect losses, and the absence of uncertainty data available for the assessment as well. As a result, the LCC studies have been largely limited only to those relatively simple LCCA problems of planning or conceptual design for making decisions. Accordingly, in the recent years, the researchers have pursued extensive studies on the LCC effectiveness mostly related to LCC models and frameworks for civil infrastructures. Moreover, recently the demand on the practical application of LCC effective decisions in design and maintenance is rapidly growing unprecedently in civil engineering practice. Indirction cost is very important on LCC formulation. But that is very difficult and complicate the estimation every LCC. The objective of this paper is to suggest efficient regression model for the estimation of indirect cost approach to the practical application of LCC for the design and rehabilitation of civil. infrastructures considering traffic, traffic network, detour condition, and workzone condition. In this paper, it performed the sensitivity analysis and correlation analysis of parameter for development of regression model of inflection cost.