• 산업공학
• /
• 제17권spc호
• /
• pp.122-130
• /
• 2004

Since the cost of software maintenance occupies about 50~75% in a general successful organization, the software maintenance plays an important role in software life cycle. In particular, if the managed system needs to be operated in a long term or the system is very large and complex, then the maintenance is especially more important. Software maintenance is defined as software modification activities after customer delivery, such as improvement of performance or functionality, error correction, adaptation to environmental changes, etc. In this paper, software cost estimation models are proposed, that is based on productivity of manpower in maintenance projects. In order to do this, the activities of maintenance are classified into function change, non-function change, user support and application operation. The proposed models are constructed and verified based on the real size and cost information of projects in the real world. The approach in this paper is to discriminate the heterogeneous activities in maintenance projects, and then to calculate the respective cost of each discriminated activity. By using the proposed models, the total cost of maintenance project is summed from the costs of four activities. In addition the number of conflicts between owner and order receiver about the amount of cost will be reduced and the reasonable cost estimation system will be established.

• 산업공학
• /
• 제23권3호
• /
• pp.221-228
• /
• 2010

With the development of science and technology, modern submarines are equipped with high technology devices and multi-functioned precise armaments, consequently, acquisition cost as well as maintenance cost of the submarines are getting higher and higher. However, tight defense budget forces navy to significantly reduce military operating and maintenance costs. In this study, the maintenance and operating costs of submarine Jangbogo-II are estimated through M&S (Modeling and simulation) methodologies in order to reasonably and consistently work out the requirement verification system of Jangbogo-II. The maintenance and operating costs of Jangbogo-II along the next 25 years are estimated as 312.65 billion won via engineering analysis methods while 312.69 billion won from PRICE Model, which shows only 0.04 billion won differences as a whole. This study is expected to be able to provide meaningful decision making data for not only short and/or mid term operating planning but military budgeting.

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.159-169
• /
• 2007

본 연구에서는 효율적인 포장관리를 위해 경제성을 고려하여 생애주기비용(LCC)이 최소가 되는 시점에서 필요한 유지보수공법을 적용할 수 있는 포장관리시스템(PMS)을 개발하여 실제 포장관련 자료를 기반으로 한 유지관리방안을 제시하였다. 나아가 예산제약이 없는 경우를 대상으로 일정한 수준의 도로 서비스수준을 유지하기 위해 필요한 예산은 매년 차이가 있음도 확인하였다. Visual Basic 프로그램으로 개발하여 시스템의 응용성과 실효성의 검증을 위해 22개의 국도포장단면을 대상으로 현장조사를 시행하여 얻은 자료를 바탕으로 포장단면의 장기공용성 추정과 예산범위를 고려한 효율적인 유지관리 방안을 제시하였다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.730-731
• /
• 2015

This study aims at giving the framework to estimate the environmental load at planning and schematic phase. With increasing awareness of environmental issues, the effort to reduce the environmental impacts caused by human activity has been increasingly enlarged. So far most of researches estimating CO₂ emissions have analyzed energy consumption based on BOQ (Bills of Quantity) acquired after detailed design. There is also lack of reliability in the estimated environmental impact using the basic unit of a facility at the planning stage, because it uses a limited specific section of historical data. Thus, this study is targeted at developing framework to assess reliable environmental loads based on information available at project early phases by making case-bases from historical design information on PSC Beam Bridge. Historical database is built on the basis of the LCA (Life Cycle Assessment) and in order to set input information for estimating model, the literature about information in an early project phase are reviewed. Using the information available in the planning and schematic design stage, the Framework is presented to estimate the environmental load in an early stage in the project. Developing an environmental load estimation model in accordance with the Framework presented in this study, it is expected that the environmental load in the initial project phase can be estimated more quickly and accurately.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.47-54
• /
• 2014

선체 내구성은 기존 선급 규격에 의하여 구조 치수를 결정한 후 이러한 치수의 선체구조에 대하여 스펙트랄과 결정론적 및 간이 방법에 의하여 평가되고 있다. 이러한 방법은 선체재료를 선급 규격에서 제안하고 있는 재료로 구성하는 경우에는 적용할 수 있으나 선체 재료를 신소재로 구성하는 경우에는 적용할 수 없다. 따라서 본 연구에서는 폴리에틸렌 보트 선체에 대한 피로 손상을 평가하기 위하여 선체에 부하되는 단기간 선체 가속도를 직접 측정하고 이러한 데이터를 기초로 구조설계와 피로수명평가방법이 확립되지 못한 소형 선박의 선체 내구성을 선형누적손상 법칙으로 평가하는 방법을 제안하였다. 개발된 폴리에틸렌 보트의 경우 최대 가속도 상태에서 보트에 부하되는 최대 Von-Mises 응력은 1.8MPa로서 $1{\times}10^9$ 사이클 피로강도 5.9MPa 아래에 있고 유한피로수명개념을 적용한 폴리에틸렌 보트의 내구수명은 415년으로 평가되어져 거의 무한수명을 가지고 있다.

• 한국안전학회지
• /
• 제22권5호
• /
• pp.71-76
• /
• 2007

Failures of equipments for train control systems are linked directly to extensive damages of human lives or financial losses from the increasing uses of train control equipments utilizing computers. Then safety activities for assuring safety and reliability are needed during the system life-cycle. Risk analysis is important phase to increase safety from determining the risk presented by the identified hazard. In this paper, we investigated several methods for risk estimation of safety activities, and then we drew a comparison between original methods to suggest optimized one in the application to train control systems. In the result of the comparison, we had plan to propose the risk analysis method called Best-Practice(BP) risk method combining advantages of the qualitative and the quantitative analysis. In addition, we attempted to apply the BP-risk method to domestic train control systems handling in Korea.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.387-404
• /
• 2016

In this paper, the response and failure of sharp-notched 6061-T6 aluminum alloy circular tubes with five different notch depths of 0.4, 0.8, 1.2, 1.6 and 2.0 mm subjected to cyclic bending were experimentally and theoretically investigated. The experimental moment-curvature relationship exhibits an almost steady loop from the beginning of the first cycle. And, the notch depth has almost no influence on its relationship. However, the ovalization-curvature relationship exhibits a symmetrical, increasing, and ratcheting behavior as the number of cycles increases. In addition, a higher notch depth of a tube leads to a more severe unsymmetrical trend of the ovalization-curvature relationship. Focusing on the aforementioned relationships, the finite element software ANSYS was used to continue the related theoretical simulation. Furthermore, the five groups of tubes tested have different notch depths, from which five unparallel straight lines can be observed from the relationship between the controlled curvature and the number of cycles required to produce failure in the log-log scale. Finally, a failure model was proposed to simulate the aforementioned relationship. Through comparison with the experimental data, the proposed model can properly simulate the experimental data.

• 산업경영시스템학회지
• /
• 제34권1호
• /
• pp.74-79
• /
• 2011

Engineering valuation is a specialized discipline requiring expert knowledge and judgment, which scientifically estimates the economic value of industrial properties. By industrial properties, we mean engineering structures such as mines, factories, buildings, machines, and other industrial facilities as well as facilities of public enterprises. Particular industrial properties can have longer economic life if their performance is excellent and they are still suitable for current manufacturing needs. If not, its economic life will be shorter. As speed of technological progress becomes rapid, life-cycle and development period of a product is becoming shorter. In an industry characterized by rapid development of technology, industrial properties can become obsolescent faster. Even if they are in good working order, they could be no longer suitable for manufacturing new products based on radically different technology. In our research, we apply engineering approach to estimating functional economic life by factoring in technological obsolescence in such an industry.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.264-274
• /
• 2001

An integrated fatigue strength assessment system was computerized. The system developed consists of 9 modules: user interface, cycle counting, load history construction, data searching, fatigue properties estimation, fatigue data analysis, true stress and strain analysis, expert system for crack initiation life prediction, fatigue crack initiation and propagation life prediction. Fatigue strength database also was included in this system. The fatigue expert system helps a beginner to predict a fatigue crack initiation life in fatigue strength assessment. The expert system module in this system is developed on the personal computer by using C language and UNiK, an expert system developing tool. To evaluate the system, the results of test under variable loading of SAE and failure data from a field were analyzed. The evaluation show that the system provided fatigue life prediction within 3-scatter band and gave reasonable predictions. To get more accurate predictions of fatigue life without fatigue properties, we recommend utilizing the system along with the fatigue strength database.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.61-66
• /
• 2010

Organic light emitting diode(OLED) has been developed fast from 1963 when electric light emitting phenomenon was discovered. PMOLED(passive matrix OLED) is producted earlier than AMOLED(active matrix OLED). PMOLED is mainly mounted at sub display, but AMOLED is mounted at main display. Nowadays AMOLED is expanded to PMP(portable multimedia players), navigation and TV market. Even thought OLED's market is opening to many applications, OLED's life is worried until now. If we know about OLED's real life, we need time to test so much time over 20,000hrs. Realistically, there is difficult to test such as long time with products from the information-technology sector having a short life cycle. In this paper, we study about OLED's accelerated test to reduce life test by current. We can design OLED's accelerated life model by the result of test. The model consists of design variables like ratio of light emitting, organic material structure, condition of aging, etc. In conclusion, this model can be applied to study about organic material, machine and manufacturing process etc, and also it's possible to develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.