• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.4
• /
• pp.315-320
• /
• 2004

Digital technologies have largely changed our way of life in a time-space traditional paradigm. Information Technology(IT) has become the most primary measurement in evaluation of social value. So the efficient education for IT has a big responsibility for the better living conditions. The importance of IT education continue to grow more and more. The intent of this work is to enforce the competitive power of IT education under open-education and to develop the special model of the practical IT curriculum for industry. The proposed curriculum is consisted of various modules which can be easily adapted to real world. So someone who finished IT curriculum can be re-educated the only necessary module with this developed model.

• Journal of the Korea Furniture Society
• /
• v.20 no.5
• /
• pp.517-532
• /
• 2009

This study was carried out to review the characteristics of the Swedish modern furniture design and the works of Bruno Mathsson, who is appreciated as one of the most important furniture designers in the history of modern Swedish design. First, the authors examined how the Swedish designers set the value of warm, graceful humanity, practical simplicity, and the traditional craftsmanship in their furniture design with modernist ideology. Second, by examining the range of Bruno Mathsson's works from the 1930s to the 1980s, the authors searched for how these works show the realized models of the ideals of Swedish modern furniture. In this, this article explains that Mathsson's works and the modern Swedish furniture could have been regarded and beloved as being innovative and modern for more than 50 years for their friendliness to human body by the ergonomic structure and to human feeling by the quality of natural materials and finishes. In addition, their consistent effort to adopt traditional craftsmanship into functionalist ideals of modern design shows how these furniture designs could have keep the lasting quality in the life of people in different time frames.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.838-844
• /
• 2001

The enzyme Fuc aldolase from Methanococcus jannaschii that catalyzes the aldol condensation of DHAP and L-lactaldehyde to give fuculose-1-phosphate was inactivated by DEP. The inactivation was pseudo first-order in the enzyme and DEP, which was biphasic. A pseudo second-order rate constant of 120$M^{-1}min^{-1}$ was obtained at pH 6.0 and $25{\circ}C$. Quantifying the increase in absorbance at 240nm showed that four histidine residues per subunit were modified during the nearly complete inactivation. The statistical analysis and the time course of the modification suggested that two or three histidine residues were essential for activity. The rate of inactivation was dependent on the pH, and the pH inactivation data implied the involvement of the amino acid residue with a $pK_a$ value of 5.7. Fuc aldolase was protected against DEP inactivation by DHAP, indicating that the histidine residues were located at the active site of Fuc aldolase. DL-Glyceraldehyde, as an alternative substrate to L-lactaldehyde, showed no specific protection for the Fuc aldolase.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.8
• /
• pp.1348-1357
• /
• 2016

An enzymatic reaction system was developed and optimized for bioconversion of resveratrol from glucose. Liquid enzyme extracts were prepared from Alternaria sp. MG1, an endophytic fungus from grape, and used directly or after immobilization with sodium alginate. When the enzyme solution was used, efficient production of resveratrol was found within 120 min in a manner that was pH-, reaction time-, enzyme amount-, substrate type-, and substrate concentration-dependent. After the optimization experiments using the response surface methodology, the highest value of resveratrol production (224.40 μg/l) was found under the conditions of pH 6.84, 0.35 g/l glucose, 0.02 mg/l coenzyme A, and 0.02 mg/l ATP. Immobilized enzyme extracts could keep high production of resveratrol during recycling use for two to five times. The developed system indicated a potential approach to resveratrol biosynthesis independent of plants and fungal cell growth, and provided a possible way to produce resveratrol within 2 h, the shortest period needed for biosynthesis of resveratrol so far.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.184-192
• /
• 2006

On this study, we are focusing on the spatial value of the flagship store as an effective way of experiential communication for a brand. The purpose of this study is to create effective methods for the spatial identity by connecting significance of experiential communication and strategic factors of experiential marketing. The process of this research is summarized as follows: First, we select some cases of the flagship stores realizing differentiated methods of experiential marketing and classify the types according to the marketing strategy. Second, we can analyze each function in the context of social, cultural life style. Finally, for the company flagship stores can be a tool to construct a sustainable brand image and tool differentiation, and at the same time for the consumer they can create relationships through customers' experience in the space expressing brand identity and style. Also, flagship stores can be valued as a place offering emotional experiences of cultural consumption as well as product consumption when planned given the style suitable for brand image and strategies.

• Journal of Surface Science and Engineering
• /
• v.41 no.3
• /
• pp.102-108
• /
• 2008

In this paper, the LiF and polymer thin film as passivation layer have been evaporated on green OLED devices. HDPE, polyacenaphthylene, polytetrafluoroethylene, poly(2,6-dimethyl-1,4-pheneylene oxide), poly sulfone and poly(dimer-acid-co-alkyl poly-amine) have been used as polymer materials. The optical transmittance of evaporated polymer thin film was very good as an above 90% in visible range. The morphology of polymer thin film was measured by AFM. As a result of the measurement average roughness($R_a$) value of the polysulfone was very low as 2.2 nm. The green OLED devices with a structure of ITO/HIL/HTL/EML/Buffer/Al in series of various passivation films were fabricated and analyzed. It was observed that an OLED device with LiF as first passivation film has shown the good electrical and optical property, and all kind of polymer films did not influence on the I-V-L characteristics and the life time of OLED devices. Therefore, we found that polymer layer played a key role as a buffer layer between the inorganic passivation layers to relieve the stress of the inorganic layers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.428-428
• /
• 2007

In this study, It was studied about the luminance characteristics of 17inch direct-type back light using EEFL(External Electrode Fluorescent Lamp). EEFI has a long life time because the electrode is installed outside of lamp. And it is produced low price than conventional CCFL. It does not need process of installing internal electrode. But EEFL technology has several problems such as difficulty of design driving inverter, and prevents leckage current along the skin of lamps. Therefore, by the optimizing of inverter properties, 7525 nit center luminance was acquired in almost same power consumption condition. It was almost same luminance in CCFL backlight unit. And it was operated stably in low operating temperature such as the value of $40^{\circ}C$, so that it was adopted in conventional LCD-TV application.

• Journal of Information Technology Services
• /
• v.8 no.3
• /
• pp.209-221
• /
• 2009

The successful mass media drama, 'The 1st Shop of Coffee Prince', has received lots of supports from the audience by showing them a vivid life and also enabling them to dream a real fantasy. One among the most powerful strategies that made this drama stay successful is the marketing value of the drama space fully maximized when doing the production. This study, introducing a unique representation of 2-D cell matrix with x-y plots of drama space set along the time stream following the scenario, first proposes a quantitative way of uncovering the hidden relation between drama space and scenario using nonlinear matrix filtering method and, secondly, suggests possible service designs mainly constrained by economical standpoints of the stakeholder in producing the drama. The methodology may invoke a plausible contradiction with art instincts that have hardly been supposed to be affected by financial debate, which, nevertheless, must sometimes be allowed under the circumstance of pursuing optimality in programming and producing the drama that must survive in the world of competitive market of service business.

• Geomechanics and Engineering
• /
• v.18 no.5
• /
• pp.459-469
• /
• 2019

It is important to estimate the shear strength of shallow compacted soils as a construction material. A series of constant water content triaxial compression (CWCC) tests under low confining state in this study were performed on compacted geomaterials. For establishing a relationship of the shear strengths between saturated and unsaturated states on compacted geomaterials, the suction stresses were derived by two methods: the conventional suction-measured method and the Suction stress-SWRC Method (SSM). Considering the suction stress as an equivalent confining stress component in the (${\sigma}_{net}$, ${\tau}$) plane, it was found that the peak deviator stress states agree well with the failure line of the saturated state from the triaxial compression test when the SSM is applied to obtain the suction stress. On the other hand, the cavitation phenomenon on the measurement of suction affected the results of the conventional suction-measured method. These results mean that the SSM is distinctly favorable for obtaining the suction value in the CWCC test because the SSM is not restricted by the cavitation phenomenon. It is expected that the application of the SSM would reduce the time required, and the projected cost with the additional equipment such as a pore water measuring device in the CWCC test.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.1-6
• /
• 2019

CCTV video recording system is recognized as evidence value of video data, and is widely used in real life for the purpose of security of facilities or security control, and it is developing in order to process high-resolution and high-capacity data in real time through network. However, there is no description of redundancy to prevent the loss of image data due to defects of unexpected equipment or external attack, and even if the redundancy is implemented, a high-capacity video stream is transmitted through the network, network overload can not avoided. In this paper, we propose and verify a failover method based on rules that can operate the redundancy scheme without inducing network overload in CCTV network video recording environment.