• 응용통계연구
• /
• 제9권2호
• /
• pp.119-134
• /
• 1996

가속수명검사는 시간과 경비를 현실적인 여건에 맞추기 위하여 정상조건보다 열악한(강도가 높은) 조건에서 검사를 수행하여 그 결과를 정상조건에서의 수명분포와 관련된 관심사(기대수명, 신뢰도) 등을 추정하는 것을 목적으로 하는 검사 방법이다. 이 연구에서는 고장률이 다른 두 개의 부품이 직렬형으로 구성된 시스템의 가속수명검사 자료를 분석할 때 사용되는 하나의 모형을 제안하고 분석 과정 및 기존의 두 개의 부품이 서로 독립이라고 가정한 모형과 비교하는 것을 주요 내용으로 하였다. 시스템이 작동될 때 받는 관찰이 가능하지 않은 총체적인 환경의 효과를 동일 시스템내의 두 개의 부품이 공유하게 됨으로써 발생되는 두 부품의 수명의 의존성을 frailty 모형을 이용하여 모형화하였고, 분석 과정에서는 Profile 우도함수를 사용하여 최대 우도 추정 과정에서의 초기치 문제를 해결하는 방법을 제시하고 모의실험을 통하여 독립성의 가정을 검토하여 보았다.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1119-1124
• /
• 2009

This paper deals with the variability analysis of short term creep rupture test data based on the previous creep rupture tests and the possibility of the creep life prediction. From creep tests performed by constant uniaxial stresses at 600, 650 and $700^{\circ}C$ elevated temperature, in order to investigate the variability of short-term creep rupture data, the creep curves were analyzed for normalized creep strain divided by initial strain. There are some variability in the creep rupture data. And, the difference between general creep curves and normalized creep curves were obtained. The effects of the creep rupture time (RT) and steady state creep rate (SSCR) on the Weibull distribution parameters were investigated. There were good relation between normal Weibull parameters and normalized Weibull parameters. Finally, the predicted creep life were compared with the Monkman-Grant model.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.274-283
• /
• 2016

본 논문은 복잡해지는 군수분야에서 효율적이고 효과적인 예방정비업무 할당을 위해 Hard Time업무의 최적 주기산정 및 이를 통한 경제적 효용성을 분석하는데 연구 목적이 있다. 본 연구는 기존 연구에서 제시하는 예방정비 주기 선정방법의 한계점을 분석하였다. 또한 일반적인 Wearout 고장 특성을 설명하는 와이블 수명분포에서 다양한 형상모수 조건과 예방정비비용과 고장정비비용 조건을 가정한 시뮬레이션을 통해 가상의 시스템에 대한 정비활동을 모의하여 총 정비비용의 추의를 분석하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.45-51
• /
• 2014

Thermal shock tests at two stress levels were performed to see the life (cycles) of LPF ASSY (low pass filter assembly) at normal stress level. In this case Coffin-Manson relationship is generally used to describe the relationship between the temperature difference and the life, together with the Weibull distribution describing the life at each stress level. So for given data Coffin-Manson is fitted to predict the life at normal stress level. However, different types of models are appropriate for this type of test. Hence, a more appropriate model such as General log-linear model which can also incorporate the duration at the highest and lowest temperatures and acceleration time will be introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.498-499
• /
• 2006

Oil-filled transformer technology has been around more than 100 years. The principle of operation in the same today as it has been for the previous decades. But all transformers have their life so it is important to know their useful life and the time for replacement. This paper will address this issue and provide the distribution transformer oil aging test results. Distribution transformer and laboratory specimens were externally heated to their respective maximum temperatures. Sample of oil and paper were removed at convenient intervals for testing. We believe that the results of this study will show the possibility of assessing the life of transformers.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.52-60
• /
• 2019

In this paper, four types of insulation coils were fabricated by adding various kinds of glycols to improve the flexibility and adhesion of insulating coils in varnish dispersed with PAI / Nano Silica_15wt%. The applied voltage and frequency were 1.5 kV / 20 kHz for accelerated life evaluation. Through the 6th temperature stress level, the cause of the insulation breakdown of the coil was ignored and only the breakdown time was measured. The Arrhenius model was chosen based on the theoretical relationship between chemical reaction rate and temperature for estimating the insulation life of the coil due to accelerated thermal stress. Three types of distributions (Weibull, Lognormal, Exponential) were selected as the relationship between thermal stress model and distribution. The average insulation lifetime was estimated under the temperature stress of four types of insulation coils through the relationship between one kind of model and three kinds of distributions.

• 대한가정학회지
• /
• 제35권1호
• /
• pp.1-14
• /
• 1997

The purpose of this study is to investigate time use of married female clerical workers and their husbands. Data for 143 couples were gathered from using structured questioinaire and time dairy. The analysis of time use data was carried out two approaches. They are the amount of time spent and the distribution of time for dailly activities. And also the couples' perceptions how restricted their long time labor to their family life was analyzed. The results were shown as follows: (1) Married female clerical workers and their husbands have long labor time and their physiological and leisure time is too short. This means the patterns of their time use are very unbalanced type. (2) Wives worked longer than husbands on total labor with a large sexual difference in household works.(3) Couples perceived that wives' work more negative affection on their family life than husbands' work.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.338-344
• /
• 1996

This study was an investigation of plasma-induced damages on silicon substrate in the semiconductor manufacturing technology. The plasma-induced damage level on silicon substrate was analyzed and compared in various plasma etching systems. The analysis methods were therma wave, life-time recovery, SCA (Surface Charge Analyzer) and TRXF (Total Reflection X-ray Fluorescence) measurements, and the measured values were compared for each systems. In the comparison of the values which were obtained by a system that had low life-time recovery, there was not any differences in DC parameters. However, the reflesh time distribution of device of that system had decreased about 10 to 20m sec compared to a system which had high life-time recovery.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.5-8
• /
• 2009

The reliability of multilayer ceramic capacitor with active thin dielectric layer was investigated by highly accelerated life test at various stress condition. The distribution of multilayer ceramic capacitor failure times is plotted as a function of time from Weibull distribution function. According to the test result, voltage acceleration factor is obtained from 2.24 to 2.96. The acceleration by temperature is much higher than other values of active thick dielectric layer. It is clear that median time to failure is affected by the stress voltage for high volumetric efficiency ceramic capacitors with active thin dielectric layer. The degradation under stress of voltage involves electromigration and accumulation of oxygen vacancy at Ni electrode interface of cathode.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.73-80
• /
• 2018

Certification revocation list(CRL) is needed for excluding compromised, faulty, illegitimate vehicle nodes and preventing the use of compromised cryptographic materials in vehicular communications. It should be distributed to vehicles resource-efficiently and CRL computational load of vehicles should not impact on life-critical applications with delay sensitive nature such as the pre-crash sensing that affords under 50msec latency. However, in the existing scheme, when a vehicle receives CRL, the vehicle calculates linkage values from linkage seeds, which results in heavy computational load. This paper proposes, a new CRL distribution scheme is proposed, which minimizes the time for CRL processing of vehicles. In the proposed scheme, the linkage value calculation procedure is performed by road-side unit(RSU) instead of the vehicle, and then the extracted linkage values are relayed to the vehicle transparently. The simulation results show that the proposed scheme reduces the CRL computational load dramatically, which would minimize impact on life-critical applications' operations with low latency.