• 대한수학교육학회지:수학교육학연구
• /
• 제16권4호
• /
• pp.273-295
• /
• 2006

본 연구는 수학학습 능력이 서로 다른 3학년 6명의 학생을 대상으로 총 6회의 실생활 문제 상황을 활용한 어림수업을 실시하여 어림에 어떤 변화가 보이는지 분석하고 어림학습 전과 후에 실생활 문제 상황 학습지를 투입하여 그에 대한 변화를 비교해 보았다. 실생활 문제 상황을 활용하여 역할극으로 진행된 어림수업에서 학생들은 자신의 생활과 친숙한 문제 상황 속에서 어림을 사용하였으며, 문제 상황에 따라 적절한 자리 수를 결정할 수 있음을 확인하였다.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.202-205
• /
• 2010

In this paper, mechanical reliability(Life-time) estimation method for 25.8kV SIS(Solid Insulated Switchgear) has been studied. Recently enacted KEPCO's standard includes clause that have to submit a warrantable reliability data for life-time(over B10 25 years) of an epoxy-solid insulating material. Accordingly, this research was carried out on the ALT(Accelerated Life Test) and Life-Estimation method for SIS's insulating material. Mechanical life-time estimation for SIS's insulating material is to verify reliability for tensile creep & fatigue stress, which is the major mechanical stress of SIS. This study proved that SIS's reliability for mechanical stress and established that confidence for estimation results in further verification test.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.223-230
• /
• 2003

Generally, the life-span of a multi-housing complex is over 50 years, but in reality they are usually demolished after 20 years in spite of its remaining life expectancy. Thus, this research focuses on the estimation of the optimum economic life-span of a multi-housing complex. To estimate the minimum total cost point of start to finish of a multi-housing complex, we'll apply MAPI(Machinery and Allied Product Institute) and LCC(Life Cycle Cost) theory.

• 산업경영시스템학회지
• /
• 제30권4호
• /
• pp.164-169
• /
• 2007

The estimation of mortality characteristics of industrial property is an important adjunct to engineering valuation and depreciation estimation. Once the important of depreciation estimation is determined, it is desirable to understand the processes upon which these estimates are based. The Iowa type survivor curves are a set of generalized retirement dispersion models. These curves were based on analysis of actual retirement experience and represent typical retirement behavior patterns likely to be encountered. The retirement rate of Iowa type survivor curves on the semiconductor equipments in Korea industry was estimated by the life estimation process. In this paper, estimates of service lives based on directly observed data of the domestic semiconductor equipments are presented.

• 대한산업공학회지
• /
• 제36권4호
• /
• pp.212-218
• /
• 2010

This paper shows accuracy comparison results of reliability estimation methods for one-shot systems with respect to sample sizes. To compare accuracy in reliability estimation methods, quantal-response data, characterizing one-shot systems, were simulated using failure times of LED obtained through the accelerated life test, and then the true reliability over time was evaluated using the failure times. The simulated quantal-response data were used to estimate the true reliability through applying reliability estimation methods in open literature. Accuracy of each reliability estimation method was compared in terms of both SSE (Sum of Squared Error) and MSE (Mean Squared Error), and then estimation trend for each method is found. Feasible bounds which true reliability would exist within were estimated through applying the found trends to quantal-response data set of a real weapon system.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.130-136
• /
• 2009

Estimation of mortality behavior of a industrial property are useful for calculating depreciation and making management decisions relating to property. The common methods of computing depreciation require an estimation of service life, and some methods may require an estimate of life expectancy. Estimation of service life and life expectancy can be computed from a smoothed and extended life table of original life tables developed through life analysis techniques. Several actuarial techniques are available to construct a life table for depreciation application. Of these methods, the graphic approach and graduation by mathematical formula are the most widely used in the field of depreciation. A commonly used technique of smoothing and of extending the life table is to fit a lows type survivor curves to the observed retirement rate by the least square method. In this paper, estimates of depreciation rate based on directly observed data of the domestic petrochemical equipments are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
• /
• pp.46-49
• /
• 2000

This paper studied development of the program for estimation the life time of insullating materials and the longtime breakdown voltage. First, short-time breakdown voltage of Epoxy and insulating oil was measured. Life exponent was gained from measurement of insulating breakdown time of the specimens. Life time is presumed from program. The estimation program is based on the "Inverse Power Law", defined $V^nt$ is constant. After gaining the life exponent n, it is mapping the longtime breakdown voltages. On the base of life exponent, the estimation the lifetime and usefulness of the insulation systems are possible, furthermore easy calculation is possible.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.11-19
• /
• 2012

PURPOSES: The new methodology is proposed for estimation of long-term performance and pavement life based on the national highway database in Daejeon area. Furthermore, this study tried to verify the applicability of performance estimation using NHPCI (National Highway Pavement Condition Index) on tendency of pavement deterioration as time goes by under Korean road environments. METHODS: Reliability theories are applied to estimate the mean life and to determine the appropriate distribution using 3 levels of traffic loads (high, medium, low) based on maintenance and rehabilitation history data for 15 years. RESULTS: As a result, Lognormal distribution is suitable for explanation of pavement lifetime in Daejeon area regardless of traffic loads. In addition, we found that the results of mean life and maintenance timing based on NHPCI for the pavement sections of 3 levels of traffic loads are available. CONCLUSIONS: Based on this study, it was found that mean life of high, medium and low levels of traffic loads are about 8.1 years, 12.2 years and 12.7 years, respectively. Higher level of traffic loads shorten the pavement mean life.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.57-60
• /
• 2000

An aluminum electrolytic capacitor is used in DC Link of ac motor drive system. In this case it usually has the shortest lifetime in the system and then determines the system lifetime. Therefore life estimation of the electrolytic capacitor is needed for maintenance of th circuit. In this paper a method for life estimation is presented with a ESR(equivalent series resistance) model and a heat transfer model of capacitor that can be used to estimate operating temperature it is investigated through a simple example using ESR and heat transfer.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.65-70
• /
• 1998

In this report, the creep properties and creep life estimation by Larson-Miller Parameter(LMP) Method for 2.25Cr1Mo steel to be used as power plant tubes or other components were presented at the high temperatures of 500, 550, and $600^{\circ}C$. It was confirmed experimentally and quantitatively that a creep life estimation equation at such various high temperatures was well derived by LMP and could be used very effectively within the creep life of 10$^3$ hours, but very unreliable and even dangerous for design in a long term of creep life such as 10$^4$ or $10^5$ hours.