• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.435-442
• /
• 2018

This study implemented an FPGA-based system to extract PCB defect patterns. The FPGA-based system can perform pattern matching at high speed for vision automation. An image processing library that is used to extract defect patterns was also implemented in IPs to optimize the system. The IPs implemented are Camera Link IP, Histogram IP, VGA IP, Horizontal Projection IP and Vertical Projection IP. In terms of hardware, the FPGA chip from the Vertex-5 of Xilinx was used to receive and handle images that are sent from a digital camera. This system uses MicroBlaze CPU. The image results are sent to PC and displayed on a 7inch TFT-LCD and monitor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.43-48
• /
• 2005

A robot system encompassing a remote control and monitoring through a virtual robot design is addressed and a tracking problem for a 2D (2 dimension) moving target by a robot vision is chosen as a case study. The virtual robot is developed, and it synchronizes with the real robot by compensating delay time. Two systems are displayed on a remote panel by communicating command and image data. The virtual robot utilizes an OpenGL library in Visual $C^{++}$ environment. Additionally, the remote monitoring and control between the real robot and the virtual robot are accomplished by employing an appropriate data compression in a network communication.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.90-96
• /
• 2024

In this paper, we propose an automated system. It utilizes a Raspberry Pi camera and a function generator to analyze luminance in an image. Then, it applies voltage based on this analysis to control light transmission through coloring smart windows. The existing luminance meters used to measure luminance are expensive and require unnecessary movement from the user, making them difficult to use in real life. However, after taking a photography, luminance analysis in the image using the Python Open Source Computer Vision Library (OpenCV) is inexpensive and portable, so it can be easily applied in real life. This system was used in an environment where smart windows were applied to detect the luminance of windows. Based on the brightness of the image, the coloring of the smart window is adjusted to reduce the brightness of the window, allowing occupants to create a comfortable viewing environment.

• Journal of the Korean Society for information Management
• /
• v.17 no.2
• /
• pp.207-229
• /
• 2000

The lack of an understanding of the characteristics of a specific user group in computer-based information systems in libraries hinders library and information science professionals in grasping users' needs and making the best decisions when designing, acquiring, and managing information systems. The objective of this study was to provide information on the characteristics of specific user groups such as male ＆ female student groups. undergraduate ＆ graduate ones, Sciences and Humanities majored ones etc. This study also provides system developers (vendor) and adopters with users' needs and the merits or demerits of a specific system on the basis of students' evaluation. For the purpose, questionnaire was prepared and administered to Korean college students in the city of Taegu, Korea and adjacent area. One hundred and seventeen usable questionnaires were obtained and analyzed. These were analyzed using descriptive, inferential statistics. and SPSS software. The major findings of this study are: (1) Gender of the students affects the preference for the type of OPAC system selected more than that of academic level of study, age, and academic major; (2) The domestic in-house OPAC systems in Korea affect the user preference of system much more than that of foreign package ones; (3) System designers should prepare and use professional terms or abbreviations for system users more carefully, and explain them in detail; (4) Most of users preferred package OPAC systems to in-house ones, and preferred GUI systems to Telnet-based ones. Also, there was a significant difference between them. Conclusions are drawn from the findings in this paper, and recommendations are proposed when designing, adopting, or managing a new system. Topics for future studies on the characteristics of OPAC systems and their user are also suggested.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.57.2-57.2
• /
• 2017

Remote and robotic telescopes are the most effective instrument for astronomical survey projects. The system is based on the dynamic operation of all astronomical instruments such as dome and telescope control system (TCS), focuser, filter wheel and data taking camera. We adopt the ASCOM driver platform to control the instruments through the integrated software. It can convert different interface libraries from various manufacturers into a uniform standard library. This allows us to effectively control astronomical instruments without modifying codes. We suggest a conceptual design of software for automation of a small telescope such as the new wide-field 0.25m telescope at McDonald Observatory. It can also be applied to operation of multi-telescopes in future projects.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.669-679
• /
• 2018

Energy consumption savings in buildings should be reviewed in diverse areas such as air conditioning system and lighting responsible for cooling and heating, and energy management systems such as BAS (Building Automation System) and BEMS (Building Energy Management System) are introduced to improve energy consumption efficiency and to promote economic control of related facilities by integrated management of energy generated and consumption in buildings. The measured building of this study uses regenerative geothermal system. Measured values of heat pump and system COP were 4.7 and 4.2 respectively, and they were found to be higher 11.9% and 23.5% than rated values. As a result of analyzing the air conditioning and lighting energy from the first floor to the fourth floor performing the air conditioning, the second and third floors, which have a high frequency of use, are compared with the first and fourth floors 50% higher energy consumption ratio. On the other hand, the general heat storage system uses the nighttime power of the previous day to store heat and use it the next day. The total number of days of abnormal operation during the summer season is 61 days. The electricity cost corresponding to the abnormal operation is 1,840,641 KRW, and the normal operation using the nighttime power is 1,363,561 KRW, which is difference of 477,080 KRW, 35% increase in cost. We will utilize it as the main data of BEMS through analysis of winter operation characteristics as well as summer operation characteristics.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.137-145
• /
• 2011

BIM Data exchange using standard format can provide a user friendly and practical way of integrating the BIM tools in the life cycle of a building on the currently construction industry which is participated various stakeholder. It used IFC format to exchange the BIM data from Design software to energy analysis software. However, since we can not use the material name data in the library of an energy analysis directly, it is necessary to input the material property data for building energy analysis. In this paper, to matching the material named of name of DOE-2 default library, rhe extracted material names from BIM file are inferred by the ontology With this we can make the reliable input data of the engine by development a standard data and also increase the efficient of building energy analysis process. The methodology can enable to provide a direction of BIM-based information management system as a conceptual study of using ontology in the construction industry.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.135-143
• /
• 2016

In this study, an embedded system composed of equipment setting, block importing, scenario setting and output reporting is developed in multi-body dynamics program, ADAMS, for conducting dynamic structural analysis of block lifting process. First, equipment used for block lifting process is set in the simulation environment and the shapes and functions of two lifting beams, and six block loaders are provided as the equipment. Second, the modal analysis result of the lifting block is imported from the static structural analysis system, NASTRAN. Third, the lifting scenarios, such as hoisting, waiting, trolley moving, and wire connecting, are set in the system. Finally, output results in the forms of plots, texts and tables, are reported after the dynamic structural analysis. The test examples conducted in a shipyard are applied into the developed system in various condition and scenarios. The loads at the lug points, the stress contours, and the hot spot tables of the developed system are compared with the result of the static analysis system.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.23-47
• /
• 1998

Ornaments is a province of the fashion. It usually express noble metals and jewel's adorn-ment as the symbol of status and riches for a long time. The ornament design of Jewels drawing project and a product by computer are increased development and as exertion as a realization of automation. Through the use of CAD software(Auto CAD R 13 & Jewel CAD) \circled1 A design development of the jewels in industrial society \circled2 A metals art & design on the dress and it's ornaments - Study about application of principle(liberal curve, arrangement of repeated form, gradual unity, rhythmical harmony) Although Auto CAD don't various expression of Jewels than a Jewel CAD, formative.scientific.funtional development of geometrical form is free. That is (to say), geometrical form is given much weigh in the general CAD, but Jewel CAD made concentrate software on the jewels design for the expression of liberal form. The CAD/CAM software for jewellery program is composed of main menu, icons, hotkeys. Changing form is derived from a definite point, curve elements of a drawing. \circled1 3-Dimensional \circled2 Easy and flexible \circled3 Bulit-in and self created library \circled4 From simple wire frame to full color images. As a CAD can practice all the creation activity effectively, from Design & Drafting Software to Rendering generally can present precise results. A point of view of the connection the scientist and art, this practicableness of CAD have a lot of possiblity of development. That will do much for the related fields of industry. Consequently, subjective intension of a creator & humanity with value plays role in practical application of the design.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.48-52
• /
• 2023

From the past to the present, banners are consistently used as effective advertising means. In the case of Korea, there are frequent situations in which hidden advertisements are installed. As a result, such hidden advertisement materials may damage urban aesthetics and moreover, incur unnecessary manpower consumption and waste of money. The proposed method classifies the detected banners into good banner and bad banner. The classification results are based on whether the relevant banners are installed in compliance with legal guidelines. In the process, YOLO and Open Computer Vision library are used to determine from various perspectives whether banners in CCTV images comply with the guidelines. YOLO is used to detect the banner area in CCTV images, and OpenCV is used to detect the color values in the area for color comparison. If a banner is detected in the video, the proposed method calculates the location of the banner and the distance from the designated bulletin to determine whether it was installed within the designated location, and then compares whether the color used in the banner is complied with local government guidelines.