• Journal of Electrochemical Science and Technology
• /
• 제5권4호
• /
• pp.109-114
• /
• 2014

The $Li_3V_2(PO_4)_3$/graphene nano-particles composite was successfully synthesized by a facile sol-gel method. The addition of a graphene in $Li_3V_2(PO_4)_3(LVP)$(LVP) showed the high crystallinity and influenced the morphology of the $Li_3V_2(PO_4)_3$ particles observed in X-ray diffraction (XRD) and scanning electron microscopy (SEM). The LVP/graphene samples were well connected, resulting in fast charge transfer. The effect of the addition graphene nano-particles on electrochemical performance of the materials was investigated. Compared with the pristine LVP, the LVP/graphene composite delivered a higher discharge capacity of $122mAh\;g^{-1}$ at 0.1 C-rate, better rate capability and cyclability in the potential range of 3.0-4.3 V. The electrochemical impedance spectra (EIS) measurement showed the improved electronic conductivity for the LVP/graphene composite, which can ensure the high specific capacity and rate capability.

• 실천공학교육논문지
• /
• 제8권1호
• /
• pp.9-14
• /
• 2016

졸업 조건 인증을 위한 졸업 작품 및 졸업 논문 제출 규정에 따라 설계/제작한 절차를 제시하고, 개선사항을 이론적으로 제안한다. 설계 내용은 태양 에너지로 충전시키는 Li-Po 배터리로 동작하는 쿼드콥터의 자세를 확인하고, PID(Proportional Integral Differential) 제어를 통하여 균형을 유지한 결과이다. 특히 2개의 Li-Po 배터리들을 탑재하고 태양 에너지를 이용하여 하나의 배터리를 충전시키는 동안에 다른 배터리로 구동하며, 배터리 전환 회로는 2종류의 릴레이들을 사용하여 배터리 전환 회로를 구성한다. 완전 충전되지 않았더라도 특정 전압으로 충전된 배터리를 구동중인 배터리와 수시로 절환시켜, 체공시간과 항속거리를 증가시키는 방법을 제안한다.

• Journal of Electrochemical Science and Technology
• /
• 제9권2호
• /
• pp.85-92
• /
• 2018

Olivine structure of $LiFePO_4$ (LFP) is one of the most commonly used materials in aqueous rechargeable lithium batteries (ARLBs), and can store and release charge through the insertion/de-insertion of $Li^+$ between LFP and FP. We have fabricated LFP and LFP/FP electrodes on titanium paper and studied their electrochemical properties in 2 M $Li_2SO_4$. The LFP/FP electrode was determined to be a suitable electrode for electo-ostmotic pump (EOP) in terms of efficiency in water and 0.5 mM $Li_2SO_4$ solution. Experiments to determine the effect of cations and anions on the performance of EOP using LFP/FP electrode have shown that $Li^+$ is the best cation and that the anion does not significantly affect the performance of the EOP. As the concentration of $Li_2SO_4$ solution was increased, the current increased. The flow rate peaked at $4.8{\mu}L/30s$ in 1.0 mM $Li_2SO_4$ solution and then decreased. When the EOP was tested continuously in 1.0 mM $Li_2SO_4$ solution, the EOP transported approximately 35 mL of fluid while maintaining a stable flow rate and current for 144 h.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.817-823
• /
• 2000

A solid-state electrochemicall cell for sensing CO2 gas was fabricated using a solid electrolyte of Li2CO3-Li3PO4-Al2O3 mixture and a reference electrode of LiMn2O4. The e.m.f. (electromotive force) of sensor showed a good accordance with theoretical Nernst slope (n=2) for CO2 gas concentration range of 100-10000 ppm above 35$0^{\circ}C$. The e.m.f. of sensor was constant regardless of oxygen partial pressure at the high temperature above 0.1 atm. It was, however, a little depended on oxygen partial pressure as the pressure decreased below 0.1 atm. The oxygen-dependency of our sensor gradually disappeared as the operating temperature increased. The sensing behavior of our CO2 sensor was affected by the presence of water vapor, but its effect was small comparing with other sensors.

• 한국광물학회지
• /
• 제22권1호
• /
• pp.63-72
• /
• 2009

개량된 MA법으로 합성된 $LiFe(PO_4)/C$에 대해 X-선 회절분석을 실시하여 리트벨트법에 의해 결정학적 연구를 수행하였다. 리트벨트 계산 결과 리트벨트 R 지수 값은 $R_p=8.14%,\;R_{wp}=11.1%,\;R_{exp}=9.09%,\;R_B=3.88%$, S (GofF, Goodness of fit) = 1.2으로 계산이 잘 이루어졌음을 알 수 있다. $LiFePO_4/C$는 공간군 Pnma를 가지며, 격자상수 값은 a = 10.3229(3)${\AA}$, b = 6.0052(2) ${\AA}$, c = 4.6939(1) ${\AA}$이고 체적값은 V = 290.98(1) ${\AA}^3$으로 기존 다른 합성법의 연구결과와 잘 일치한다. 분말 입자는 고순도를 가지고 나노 크기($65{\sim}90nm$)로 기존 MA법보다 상대적으로 미세하고 균질도가 향상되었다. 따라서 개량된 MA법은 상업용 리튬 2차 전지의 양극물질 생산을 위한 우수한 제조법으로 판단된다.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.519-524
• /
• 2019

Spherical $Li_3V_2(PO_4)_3$ (LVP) and carbon-coated LVP with a monoclinic phase for the cathode materials are synthesized by a hydrothermal method using $N_2H_4$ as the reducing agent and saccharose as the carbon source. The results show that single phase monoclinic LVP without impurity phases such as $LiV(P_2O_7)$, $Li(VO)(PO_4)$ and $Li_3(PO_4)$ can be obtained after calcination at $800^{\circ}C$ for 4 h. SEM and TEM images show that the particle sizes are $0.5{\sim}2{\mu}m$ and the thickness of the amorphous carbon layer is approximately 3~4 nm. CV curves for the test cell are recorded in the potential ranges of 3.0~4.3 V and 3.0~4.8 V at a scan rate of $0.01mV\;s^{-1}$ and at room temperature. At potentials between 3.0 and 4.8 V, the third $Li^+$ ions from the carbon-coated LVP can be completely extracted, at voltages close to 4.51 V. The carbon-coated LVP exhibits an initial specific discharge capacity of $118mAh\;g^{-1}$ in the voltage region of 3.0 to 4.3 V at a current rate of 0.2 C. The results indicate that the reducing agent and carbon source can affect the crystal structure and electrochemical properties of the cathode materials.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.306-306
• /
• 2010

일반적으로 가장 많이 사용되고 있는 양극재료 가운데 $LiCoO_2$는 비교적 용량이 크고, 우수한 수명특성의 장점을 가지고 있는 반면, 단점으로 원재료의 높은 가격과 독성이 있으며, 열적으로 불안정하다. 반면, 원재료의 높은 가격과 독성, 열적 불안정성은 단점으로 지적된다. 이러한 단점을 극복할 수 있는 양극재료로 원료 가격이 저렴하고 높은 용량(170 mAh/g)과 열적으로 안정한 올리빈 구조를 형성하고 있는 $LiFePO_4$가 가장 이상적으로 고려되어져 왔다. 하지만 낮은 이온, 전기전도도 때문에 다양한 연구가 이루어졌다. 특성향상을 위한 연구가 필요하며, 다양한 전이금속의 도핑과 카본 코팅을 통하여 전기전도도의 향상과 함께 구조적으로도 리튬 이온의 확산을 더 용이하게 한다는 결과가 최근 보고되어 있다. 최근 다양한 전이금속의 도핑과 카본코팅을 통하여 전기전도도의 향상과 함께 구조적으로도 리튬이온의 확산을 더 용이하게 한다는 결과가 보고되어 있다. 본 연구에서는 고상반응법을 이용하여 $LiFePO_4$를 합성하였고, 카본소스를 첨가하여 전기전도도의 향상과 함께 높은 용량의 $LiFePO_4$/C양극재료를 합성하였다. 제조된 분말은 XRD 회절시험을 통하여 결정구조를 분석 하였으며, SEM을 이용하여 분말의 형상과 크기를 관찰 하였고, 또한 전기화학적 특성도 평가하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1664-1673
• /
• 2016

Lithium rechargeable cells are used in many industrial applications, because they have high energy density and high power density. For an effective use of these lithium cells, it is essential to build a reliable battery management system (BMS). Therefore, the state of charge (SOC) estimation is one of the most important techniques used in the BMS. An appropriate modeling of the battery characteristics and an accurate algorithm to correct the modeling errors in accordance with the simplified model are required for practical SOC estimation. In order to implement these issues, this approach presents the comparative analysis of the SOC estimation performance using equivalent electrical circuit modeling (EECM) and noise suppression technique (NST) in three representative $LiCoO_2/LiFePO_4/LiNiMnCoO_2$ cells extensively applied in electric vehicles (EVs), hybrid electric vehicles (HEVs) and energy storage system (ESS) applications. Depending on the difference between some EECMs according to the number of RC-ladders and NST, the SOC estimation performances based on the extended Kalman filter (EKF) algorithm are compared. Additionally, in order to increase the accuracy of the EECM of the $LiFePO_4$ cell, a minor loop trajectory for proper OCV parameterization is applied to the SOC estimation for the comparison of the performances among the compared to SOC estimation performance.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.587-591
• /
• 2011

The effect of the precipitator (NaOH, $NH_4OH$) and the amount of the precipitator (150, 200, 250, 300 ml) on the formation of $Fe_3(PO_4)_2$, which is the precursor used for cathode material $LiFePO_4$ in Li-ion rechargeable batteries was investigated by the co-precipitation method. A pure precursor of olivine $LiFePO_4$ was successfully prepared with coprecipitation from an aqueous solution containing trivalent iron ions. The acid solution was prepared by mixing 150 ml $FeSO_4$(1M) and 100 ml $H_3PO_4$(1M). The concentration of the NaOH and $NH_4OH$ solution was 1 M. The reaction temperature (25$^{\circ}C$) and reaction time (30 min) were fixed. Nitrogen gas (500 ml/min) was flowed during the reaction to prevent oxidation of $Fe^{2+}$. Single phase $Fe_3(PO_4)_2$ was formed when 150, 200, 250 and 300 ml NaOH solutions were added and 150, 200 ml $NH_4OH$ solutions were added. However, $Fe_3(PO_4)_2$ and $NH_4FePO_4$ were formed when 250 and 300 ml $NH_4OH$ was added. The morphology of the $Fe_3(PO_4)_2$ changed according to the pH. Plate-like lenticular shaped $Fe_3(PO_4)_2$ formed in the acidic solution below pH 5 and plate-like rhombus shaped $Fe_3(PO_4)_2$ formed around pH 9. For the $NH_4OH$, the pH value after 30 min reaction was higher with the same amount of additions of NaOH and $NH_4OH$. It is believed that the formation mechanism of $Fe_3(PO_4)_2$ is quite different between NaOH and $NH_4OH$. Further investigation on this mechanism is needed. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and the pH value was measured by pH-Meter.

• Journal of Electrochemical Science and Technology
• /
• 제4권3호
• /
• pp.113-118
• /
• 2013

Fluorophosphate, $Na_2MnPO_4F$ as new cathode material was synthesized by carbothermal treatment method. Prepared $Na_2MnPO_4F$ has particle size under 100 nm and residual carbon exists in surface of $Na_2MnPO_4F$. Additional carbon coating was performed in order to increase the electrochemical properties. Even capacity and overpotential were improved by carbon coating using mechanical ball milling, the reduced crystallinity limited the drastic improvement of the electrochemical properties. To solve this problem, re-heat treatment was involved to recover crystallinity and then notable improvement of electrochemical properties was obtained. Specific amount of $Li^+$ that participates in electrochemical $Li^+$ insertion / extraction reaction, was x = 1 in $Li_xNa_{2-x}MnPO_4F$ within the voltage range of 2.0 to 4.8 V. The doubled capacity by 2 electron reaction can be obtained when NMPF is charged to higher voltage over 4.8 V.