• 제목/요약/키워드: LiNbO$_3$

검색결과 599건 처리시간 0.032초

단일 레이저 펄스 발생을 위한 $LiNbO_3$ Q-스윗치 동작 특성 (The Operational Characteristics of $LiNbO_3$ Q-Switch for Generating a Single Pulse Laser)

  • 문종민
    • 대한전자공학회논문지
    • /
    • 제13권3호
    • /
    • pp.7-10
    • /
    • 1976
  • 단일 펄스의 Nd-YAG 레이저를 발생시키기 위한 Q-스인치로서 LiNbO3 크리스탈을 사용할때 생기는 난점을 해결하기 위하여 그 중계자 특성을 조사하였으며 간단한 해결 방법을 제시하였다. To eliminate some difficulties encountered in the operation of LiNbO3crystal as a Q-switch for generating a single pulse Nd-YAG laser, the operational characteristics of the crystal, was investigated. Also a simple method for solving the difficulties was presented.

  • PDF

Rf-magnetron sputtering 방법으로 Li-Nb-K-O 세라믹 타겟을 사용하여 제작한 $\textrm{LiNbO}_3$박막의 제작 및 전기적 특성 (Fabrication and Electric Properties of $\textrm{LiNbO}_3$ Thin Film by an Rf-magnetron Sputtering Technique Li-Nb-K-O Ceramic Target)

  • 박성근;백민수;배승춘;권성열;김광태;김기완
    • 한국재료학회지
    • /
    • 제9권2호
    • /
    • pp.163-167
    • /
    • 1999
  • LiNbO$_3$films were prepared by an rf-magnetron sputtering technique using sintered target containing potassium. The potassium was included to help to fabricate stoichiometric LiNbO$_3$film. Structural and electrical properties of thin films was investigated as a function of deposition condition. Optimum sputtering conditions were rf power of 100W, working pressure of 1m Torr and substrate temperature of 58$0^{\circ}C$. The thin film was grown to (012) preferred orientation. The dielectric constant of the thin film LiNbo$_3$ fabricated under optimum condition was 55 at 1MHz. Average grain size is about 200$\AA$ and roughness of the film is small enough to apply to optic devices.

  • PDF

$LiNbO_3$의 단결정 성장 (Single Crystal Growth of $LiNbO_3$)

  • 최종건;오근호
    • 한국세라믹학회지
    • /
    • 제22권5호
    • /
    • pp.43-46
    • /
    • 1985
  • Constitutional supercooling due to concentration gradient at solid-liquid interface in the melt can be avioded by increasing rotational speed for growing $LiNbO_3$ single crystals from the stoichiometric melt. Growth conditions for high quality crystals were determined by rotational speed by which other growth parameters were adjusted.

  • PDF

$LiNbO_3$단결정성장 및 특성 연구 (Growth And Characterization of $LiNbO_3$ Single Crystals)

  • 손진영;노광수;이진형
    • 한국결정성장학회지
    • /
    • 제2권1호
    • /
    • pp.43-50
    • /
    • 1992
  • 인상속도를 변수로 Czochralski법을 이용하여 $ LiNbO_3$결정들을 성장시켰다. 성장된 단결정에 균열, 기포, 셀 구조 등의 결함들이 관찰되었다. 균열들은 인상속도와 냉각속도에 매우 민감하였는데 6~7mm/h의 인상속도와 20^{circ}C/h의 냉각속도가 직경 15mm정도의 결정성장에 적당한 조건임을 알 수 있었다. 소자응용에 필요한 유전적 성질 및 광학적 성질 등을 알아보기 위하여 a축, c축방향에 따라 절삭된 시편을 온도를 변화시켜가며 측정하였다.

  • PDF

μ-PD법을 이용하여 성장시킨 Er2O3와 MgO를 첨가한 화학양론조성 LiNbO3 단결정의 Up-conversion 특성 (Up-conversion Property of Er2O3 and MgO Co-doped Stoichiometric LiNbO3 Single Crystal by Using the μ-PD Method)

  • 서중원;전원남;이성문;양우석;이한영;윤대호
    • 한국세라믹학회지
    • /
    • 제39권9호
    • /
    • pp.835-839
    • /
    • 2002
  • Micro-Pulling Down(${\mu}$-PD)법을 이용하여 직경 1 mm, 길이 30∼35 mm의 $Er_2O_3$와 MgO가 첨가된 화학양론조성 $LiNbO_3$단결정을 성장하였다. 성장된 결정의 $Er_2O_3$와 MgO 첨가에 따른 up-conversion 특성의 변화 및 MgO 첨가량이 광손상에 미치는 영향을 관찰하기 위해 투과율을 측정하였다. 또한 $LiNbO_3$ 단결정 내의 결함유무를 광학현미경을 이용하여 관찰하였고, Electron Probe Micro Analysis(EPMA)를 이용하여 결정 내에 $Er_2O_3$와 MgO가 균일하게 분포되어있음을 확인하였다.

$Ti:LiNbO_3$ 도파로 제작을 위한 열처리 과정 동안 강유전 도메인 특성에 미치는 영향 (Ferroelectric domain inversion in $LiNbO_3$ crystal plate during heat treatment for Ti in-diffusion)

  • 양우석;이형만;권순우;김우경;이한영;윤대호
    • 한국결정성장학회지
    • /
    • 제15권3호
    • /
    • pp.124-127
    • /
    • 2005
  • [ $Ti:LiNbO_3$ ], 광도파로 제작을 위해 큐리온도$(T_c)$ 아래에서 백금박스 내에서 알곤 과 산소 분위기 내에서 열처리 과정 동안 기판 표면의 강유전 도메인 특성 변화를 관찰하였다. 열처리 된 $LiNbO_3$ 기판의 +Z면의 경우 전체적으로 약 $1.6{\mu}m$ 두께로 도메인 반전이 이루어 졌으며, 표면에서 etch hillock이 관찰되었다. $LiNbO_3$ 결정 표면의 Li 이온이 외부로 확산 되는 영향을 감소시킬 수 있는 환경에 있는 기판 면에서 하나의 도메인이 관찰되었으며, 이때 결정 표면에서의 식각특성, 결정성 및 양이온 분포변화에 관하여 X-선 회절, AFM 및 SIMS를 이용하여 분석하였다.

빔세기에 따른 $Fe:LiNbO_3$ 결정의 회절효율 (Light-intensity Dependence of Diffraction Efficiency in - $Fe:LiNbO_3$ Crystals -)

  • 정태혁
    • 한국광학회지
    • /
    • 제4권3호
    • /
    • pp.323-329
    • /
    • 1993
  • 본 논문에서는 광굴절 특성을 나타내는 파라메타중 회절효율의 전도도비(${\sigma}_d$/{\sigma}_p$) 의존성에 관해 연구 하였다. 전도도비는 입사빔의 세기에 의존하며, 암전도도 ${\sigma}_d$가 광전도도 ${\sigma}_p$ 에 비해 무시할 수 없을 때 입사빔의 세기에 따라 전도도비가 변화되고, 전도도비의 변화는 결정 내의 정전기장에 영향을 주게 된다. 정전기장의 변화는 전기광학효과에 의해 굴절율을 변화시키고, 굴절율의 변화는 회절효율과 관계한다. 개방회로 상태에서 0.1%/mole $Fe:LiNbO_3$ 결정과 $LiNbO_3$ 웨이퍼에 Fe를 증착시킨 LiNb$O_3$에서 두 입사빔의 세기비와 입사빔세기의 합을 다르게 할 때 회절효율을 측정하고 이론값과 비교하였다.

  • PDF

Ag가 첨가된 0.9(Na0.52K0.48)NbO3-0.1LiTaO3 세라믹스 (Characterization of Ag doped 0.9(Na0.52K0.48)NbO3-0.1LiTaO3 Ceramics)

  • 이경수;고중혁
    • 한국전기전자재료학회논문지
    • /
    • 제23권7호
    • /
    • pp.517-520
    • /
    • 2010
  • Lead-free $0.9(Na_{0.52}K_{0.48})NbO_3$ - $0.1LiTaO_3$ piezoelectric ceramics doped with $Ag_2O$ (0-4 mol%) have been prepared by the conventional mixed oxide method. The structural and electrical properties were analyzed in order to find its potential applications. The crystal structure of 1-4 mol% Ag doped $0.9(Na_{0.52}K_{0.48})NbO_3$-$0.1LiTaO_3$ lead free piezoelectric ceramics were investigated for several sintering temperatures ($1100^{\circ}C$) by the use of X-ray diffraction analysis. In order to analyze the effect of Ag dopants on the $0.9(Na_{0.52}K_{0.48})NbO_3$-$0.1LiTaO_3$ ceramic, the diffraction intensity ratio of the (002) to (200) planes were calculated from the X-ray diffraction patterns of the ceramic samples.