• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.322-327
• /
• 2008

LGP is a key component of LCD back light unit because it determines brightness and sharpness of the display image. Usually, it has optical patterns fabricated on the bottom surface. These optical patterns convert point or line sources placed in the side of LGP to plane source at the top surface by changing the propagating direction of the incident light. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme was adopted to find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.02a
• /
• pp.184-184
• /
• 2007

• Proceedings of the Korean Vacuum Society Conference
• /
• 2001.02a
• /
• pp.196-196
• /
• 2001

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.253-256
• /
• 2017

A thin Te interlayer was applied to a Ni/n-InGaAs contact to reduce the contact resistance between Ni-InGaAs and n-InGaAs. A 5-nm-thick Te layer was first deposited on a Si-doped n-type $In_{0.53}Ga_{0.47}As$ layer, followed by in situ deposition of a 30-nm-thick Ni film. After the formation of the Ni-InGaAs alloy by rapid thermal annealing at $300^{\circ}C$ for 30 s, the extracted specific contact resistivity (${\rho}_c$) reduced by more than one order of magnitude from $2.86{\times}10^{-4}{\Omega}{\cdot}cm^2$ to $8.98{\times}10^{-6}{\Omega}{\cdot}cm^2$ than that of the reference sample. A thinner Ni-InGaAs alloy layer with a better morphology was obtained by the introduction of the Te layer. The improved interface morphology and the graded Ni-InGaAs layer formed at the interface were believed to be responsible for ${\rho}_c$ reduction.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.26 no.3
• /
• pp.146-155
• /
• 2023

Purpose: The starting time for probiotic supplementation in preterm infants after birth varies widely. This study aimed to investigate the optimal time for initiating probiotics to reduce adverse outcomes in preterm or very low birth weight (VLBW) infants. Methods: Medical records of preterm infants born at a gestational age (GA) of <32 weeks or VLBW infants in 2011-2020 were reviewed respectively. The infants who received Saccharomyces boulardii probiotics within 7 days of birth were grouped into an early introduction (EI) group, and those who received supplemented probiotics after 7 days of birth were part of the late introduction (LI) group. Clinical characteristics were compared between the two groups and analyzed statistically. Results: A total of 370 infants were included. The mean GA (29.1 weeks vs. 31.2 weeks, p<0.001) and birth weight (1,235.9 g vs. 1491.4 g, p<0.001) were lower in the LI group (n=223) than in the EI group. The multivariate analysis indicated that factors affecting the LI of probiotics were GA at birth (odds ratio [OR], 1.52; p<0.001) and the enteral nutrition start day (OR, 1.47; p<0.001). The late probiotic introduction was associated with a risk of late-onset sepsis (OR, 2.85; p=0.020), delayed full enteral nutrition (OR, 5.44; p<0.001), and extrauterine growth restriction (OR, 1.67; p=0.033) on multivariate analyses after adjusting for GA. Conclusion: Early supplementation of probiotics within a week after birth may reduce adverse outcomes among preterm or VLBW infants.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.189-195
• /
• 2009

$\beta-Ga_{2}O_{3}$ nanorods were synthesized by chemical vapor deposition method using nickel-oxide nanoparticle as a catalyst and gallium metal powder as a source material. The average diameter of nanorods was around 160 nm and the average length was $4{\mu}m$. Also, we confirmed that the synthesis of nanorods follows the vapor-solid growth mechanism. From the results of X-ray diffraction and HR-TEM observation, it can be found that the synthesized nanorods consisted of a typical core-shell structure with single-crystalline $\beta-Ga_{2}O_{3}$ core with a monoclinic crystal structure and an outer amorphous gallium oxide layer. Li/$\beta-Ga_{2}O_{3}$ nanorods cell delivered capacity of 867 mAh/g-$\beta-Ga_{2}O_{3}$ at first discharge. Although the Li/$\beta-Ga_{2}O_{3}$ nanorods cell showed low coulombic efficiency at first cycle, the cell exhibited stable cycle life property after fifth cycle.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.60-66
• /
• 2023

As supply chain management becomes a key factor in the sustainable growth of the industry, securing minerals at the national or corporate level is becoming important. Depending on the industrial structure, the economic status of each minerals is different and the supply risk is different In this study, to examine the economic status of minerals, an index that can quantify the Industrial Economic Importance by minerals was developed and calculated by reflecting the demand structure and cost weight of each industry. As a result, Li, Al, Cu, Si, Co, Ni, etc. were evaluated as having high industrial importance in Korea. In addition, by industry, Al, Cu, Zn, and Pb for primary metal manufacturing, general machinery, assembly metals,Sn, Ba, Ti, Si and Ga for precision equipment, Si and Ga for semiconductors, and Li, Ni, Co, Si, etc. for electronic components had high industrial importance. Such as Europe and the United States, in order to select Critical-minerals, Korea will need to analyze the economic impact on the domestic industry as well as the risks of supply chain by minerals.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.84-92
• /
• 2016

Compared with Si MOSFETs, the GaN FET has many advantages in a wide band gap, high saturation drift velocity, high critical breakdown field, etc. This paper compares the electrical properties of GaN FETs and Si MOSFETs. The soft-switching condition and power loss analysis in a flyback-forward high gain DC/DC converter with a GaN FET is presented in detail. In addition, a comparison between GaN diodes and Si diodes is made. Finally, a 200W GaN FET based flyback-forward high gain DC/DC converter is established, and experimental results verify that the GaN FET is superior to the Si MOSFET in terms of switching characteristics and efficiency. They also show that the GaN diode is better than the Si diode when it comes to reverse recovery characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.172-175
• /
• 2016

Time of Flight(ToF) LiDAR(Light Detection And Ranging) technology has been used for distance measurement and object detection by measuring ToF time information. This technology has been evolved into higher precision measurement field such like autonomous driving car and terrain analysis since the retrieval of exact ToF time information is of prime importance. In this paper, as a accuracy indicator of the ToF time information, timing jitter was measured and analyzed through Single-Shot LiDAR system(SSLs) mainly consisting of 1.5um wavelength MOPA LASER, InGaAs Avalanche Photodiode(APD) at 31M free space environment. Additionally, we applied spline interpolation and multiple-shot averaging method on measured data through SSLs to improve ToF timing information.