• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.161-176
• /
• 2021

In this study, the electrochemical behavior of Sm on the binary liquid Al-Ga cathode in the LiCl-KCl molten salt system is investigated. First, the co-reduction process of Sm(III)-Al(III), Sm(III)-Ga(III), and Sm(III)-Ga(III)-Al(III) on the W electrode (inert) were studied using cyclic voltammetry (CV), square-wave voltammetry (SWV) and open circuit potential (OCP) methods, respectively. It was identified that Sm(III) can be co-reduced with Al(III) or Ga(III) to form Al_zSm_y or Ga_xSm_y intermetallic compounds. Subsequently, the under-potential deposition of Sm(III) at the Al, Ga, and Al-Ga active cathode was performed to confirm the formation of Sm-based intermetallic compounds. The X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analyses indicated that Ga₃Sm and Ga₆Sm intermetallic compounds were formed on the Mo grid electrode (inert) during the potentiostatic electrolysis in LiCl-KCl-SmCl₃-AlCl₃-GaCl₃ melt, while only Ga₆Sm intermetallic compound was generated on the Al-Ga alloy electrode during the galvanostatic electrolysis in LiCl-KCl-SmCl₃ melt. The electrolysis results revealed that the interaction between Sm and Ga was predominant in the Al-Ga alloy electrode, with Al only acting as an additive to lower the melting point.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.99-105
• /
• 2002

This study investigated characteristics of ICR18650 batteries with different electrolyte compositions in the range of $80^{\circ}C\~-30^{\circ}C$. ICR18650 cells using $1M\;LiPF_6,\;EC:\;DEC:\;DMC(3:5:5)\;and\; 1M\;LiPF_6,\;EC:\;DEC:\;DMC:\;EMC(3:5:4:1)$ electrolyte systems, which DMC and EMC solvent were added in $1M\;LiPF_6,\;EC:\;DEC$ electrolytes have high specific energy in the wide range of temperature. The specific energy of ICR18650 batteries using $1M\;LiPF_6,\;EC:\;DEC:\;DMC(3:5:5)\;and\; 1M\;LiPF_6,\;EC:\;DEC;\:\;DMC:\;EMC(3:5:4:1)$ electrolyte at $-30^{\circ}C\;was\;64\%\;and\;59\%$ of room temperature$(25^{\circ}C)$, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.2
• /
• pp.87-92
• /
• 1991

The shrinkages and physical properties of silk yarn were studied on the effect of treatment concentration, time and temperature with various neutral salts. The degummed silk yarn was shrunk about 35 percent by highly concentrated solution of Ca(NO3)2 on conditions of S.G.(special gravity) 1.45 at 9$0^{\circ}C$ or S. G. 1.46 at 8$0^{\circ}C$. About 40 percent of silk yarn was contracted in length by the treatment of CaCl2 solution on conditions of S. G. 1.33 at 9$0^{\circ}C$ for 5 mins. or at 85$^{\circ}C$ for 10 mins. By treating the concentrated solution of LiBr the silk yarn showed about 40 percent of shrinkage on a conditions of S. G. 1.38, $25^{\circ}C$ 24hrs. The physical properties of salt-treated silk yarn could be significantly changed with shrinkage variations. There were some differences in shrinkages between different type of salts. However, it was observed that generally the tenacity was decreased and breaking elongation increased as the shrinkage increased. The bulkiness of salt-treated silk yarn was increased by 110 to 120 percent compared with untreated yarn.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.696-702
• /
• 1998

The effect of alkali metal salt on the activity of Co-Mo catalyst which has high resistance to sulfur poisoning for water gas shift reaction(WGSR) was studied. Two groups of catalysts were prepared to investigate the effects of anion and cation in alkali metal salts. For K-doped catalysts made with various potassium salts having different anion, the catalytic activity was explained to depend mainly on the BET surface area. Among the catalysts prepared by various nitrates of alkali metal as precursor, the Li-doped catalyst showed the best activity, and the others did not make significant differences giving relatively low activities. And the change of BET surface area by varying the loading of alkali metal showed a similar trend to that of activity. In this case, the activity was dependent on both BET surface area and the ratio of $Mo^{6+}$ with a tetrahedral coordination symmetry to $Mo^{6+}$ with an octahedral one, $Mo^6+[T]/Mo^{6+}[O]$ value.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.83-90
• /
• 1996

The changing shape of absorption and fluorescence spectra will increasing S/D in AO-AOT system decreases and then increases again. The aggregation and disaggreation in AO-AOT system occurres. According to increasing temperature, the absorbance increases in pure AO system. But it gradually decreases in premicellar range(S/D = 10, 20, 50 and 80). The disappearance degree of metachromasy according to the concentration of added salt to AO-AOT system is increased. However, the case of $NaNO_3$is reversed. The order of disappearance degree of metachromasy on cationic salts is $Li^+$, $Na^+$ > $Mg^{2+}$ > $Ca^{2+}$, and the order of it on anionic salts is $Cl^-$ > $SO_4{^{2-}}$ > $NO_3{^-}$.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.73-73
• /
• 2017

Pyroprocessing at KAERI (Korea Atomic Energy Research Institute) consists of pretreatment, electroreduction, electrorefining and electrowinning. SFR (Sodium Fast Reactor) fuel is prepared from the electrowinning process which is composed of LCC (Liquid Cadmium Process) and Cd distillation et al. LCC is an electrochemical process to obtain actinides from spent fuel. In order to recover actinides inert anodes such as carbon material are used, where chlorine gas ($Cl_2$) evolves on the surface of the carbon material. And, stainless steel (SUS) crucible should be installed in large-scale electrowinning system. Therefore, the effect of chlorine on the SUS material needs to be studied. LiCl-KCl-$UCl_3$-$NdCl_3$-$CeCl_3$-$LaCl_3$-$YCl_3$ salt was contained in 2 kinds of electrolytic crucible having an inner diameter of 5cm, made of an insulated alumina and an SUS, respectively. And, three kinds of electrodes such as cathode, anode, reference were used for the electrochemical experiments. Both solid tungsten (W) and LCC were used as cathodes. Cd of 45 g as the cathode material was contained in alumina crucibles for the deposition experiments, where the crucible has an inner diameter of 3 cm. Glassy carbon rod with the diameter of 0.3 cm was employed as an anode, where shroud was not used for the anode. A pyrex tube containing LiCl-KCl-1mol% AgCl and silver (Ag) wire having a diameter of 0.1cm was used as a reference electrode. Electrodeposition experiments were conducted at $500^{\circ}C$ at the current densities of $50{\sim}100mA/cm^2$. In conclusion, Fe ions were produced in the salt during the electrodeposition by the reaction of chlorine evolved from the anode and Fe of the SUS crucible and thereby LCC system using SUS crucible showed very low current efficiencies compared with the system using the insulated alumina crucible. Anode shroud needs to be installed around the glassy carbon not to influence surrounding SUS material.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.103-110
• /
• 2014

In the study, a room temperature ionic liquids as a co-solvent was used to evaluate the feasibility with various electrodes in Li-ion batteries. 1-Ethyl-1-methyl piperidinium bis(trifluoromethanesulfonyl) imide(PP12 TFSI) is an ionic liquid that melts at $85^{\circ}C$. Pure PP12 TFSI is not able to be used as an electrolyte because it is a solid salt at room temperature. PP12 TFSI is mixed with EC/DEC(1/1 vol.%) to prepare mixed solvents. The electrolyte 1.5M $LiPF_6$ in a mixed solvent having 44 wt.% PP12 TFSI is prepared to evaluated the various electrodes. The electrolytes provides good cycles life of cells with $LiNi_{0.5}Mn_{1.5}O_4(LNMO)$, $LiFePO_4(LFP)$, $Li_4Ti_5O_{12}(LTO)$ and artificial graphite. Further improvement of the cell performances can be accomplished by enhancing wettability of electrolytes to electrodes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.985-991
• /
• 2008

This study was to investigated the changes of physiologically active components in germinated brown rice treated with chitosan (CGBR) and its anti-obesity effect in rat fed a high fat diet. Contents of physiologically active compounds such as total phenolic compounds, total dietary fiber, $\gamma$-aminobutyric acid (GABA), and total phytic acid in CGBR were significantly higher than those of traditional germinated brown rice (GBR). Lipase inhibitory activity of CGBR was higher than those of GBR and brown rice (BR). High fat diets containing CGBR, GBR, and BR were administered to three groups of male Sprague-Dawley rats for four weeks. All groups showed no significant difference in body weight, total abdominal fat, and plasma lipid levels. However, CGBR group appeared to have lower body weight gain and total abdominal fat level than other groups fed high fat diets containing GBR and BR. Total cholesterol and LDL-cholesterol contents in plasma of CGBR group were also lower than those of other groups. Thus, new germination method of brown rice using chitosan is a useful process, which utilizes plant defense responses to elevate the production of secondary metabolites and anti-obesity effect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.996-1006
• /
• 2019

Objective: This study aimed to gain deeper insights into the dynamic changes in spoilage fungi populations during fermentation and the influence of traditional additives on silage quality. Methods: Elephant grass (Pennisetum purpureum) was prepared without any additive (control), and with the addition of 0.5% salt, and 0.5% salt-0.2% sugar mixture. The fungal community was then determined using a classic culturing method and high-throughput sequencing at 0, 5, 15, and 60 days after ensiling. Results: The results showed that the fungal community of elephant grass silage varied significantly between the natural fermentation without any additive and the two additive groups. The diversity and relative abundance of spoilage molds in the control group were much higher than those in the two treatment groups (p<0.05). Three species of yeasts (Candida sp., Pichia sp., Trichosporon sp.) and four spoilage molds (Fusarium sp., Aspergillus sp., Muco sp. and Penicillin sp.) were the predominant fungi in elephant grass during natural fermentation from 0 to 60 days, which were found to be significantly decreased in salt and sugar additive groups (p<0.05). Meanwhile, the diversity and relative abundance of undesirable molds in the 0.5%-salt additive group were the lowest among all groups. Conclusion: Adding salt and sugar, particularly 0.5% salt, is a promising effective approach to reduce the amount of undesirable fungi thus, improving the silage quality of elephant grass in northern Vietnam.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.99-105
• /
• 2014

$LiCoO_2$ thin film have received attention as cathodes of thin-film microbatteries. In this study, $LiCoO_2$ thin films were synthesized on Au substrates by sol-gel spin coating method and electrochemical properties were investigated under annealing temperature and time. The phycochemical properties of $LiCoO_2$ thin film were investigated by X-ray diffraction, scaning electron microscopy and atomic force microscopy. The electrochemical properties were characterized using galvanostatic charging/discharging cycling tests. From X-ray diffraction, as-grown films annealed at $550^{\circ}C$ and $750^{\circ}C$ are presumed to be spinel structure and a single phase of the layered-rock-salt, respectively. The RMS roughness and grain size of the films which annealed at $750^{\circ}C$ has similar values for annealing time 10 and 30 min, while for annealing time 120 min surface roughness, grain size increase and pore appearance were observed. The first discharge capacity of $LiCoO_2$ thin films annealed at $750^{\circ}C$ for 10, 30 and 120 min is about 54.5, 56.8 and $51.87{\mu}Ah/cm^2{\mu}m$, respectively. Corresponding capacity retention at 50th cycle is 97.25, 76.69, 77.19%.