• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1579-1582
• /
• 2005

철도 운전사고의 대부분을 차지하는 철도건널목에 대한 기존의 사고예측식은 국외의 경우 Peabody Dimmick Formula, New Hampshire Index, National Cooperative Highway Research Program(NCHRP) report 50, U.S. Department of Transportation(DOT) 사고예측식 등을 이용하고 있었으며, 국내의 경우, U.S. DOT 사고예측식의 입력변수를 다변량 분석법을 이용하여 국내에 맞게 조정한 사고예측식을 이용하고 있다. 그러나 위에서 제시한 철도건널목 사고예측식은 철도건널목에서 발생하는 사고를 단순히 철도통행량, 도로통행량, 선로수, 도로수 등의 요인에 국한하여 분석한 것이고, 사고예측식 자체가 철도건널목에만 국한된다는 맹점을 안고 있어서 철도건널목장치라든지 철도건널목을 이용하는 사람들의 성향 등, 여러 인자를 고려한 철도건널목에서의 안전성분석 및 대책을 제시할 필요가 있다. 본 논문에서는 철도건널목장치를 포함하여 다른 시스템에도 범용적으로 적용할 수 있고, 제한된 변수에만 국한하지 않아 여러 사항을 고려할 수 있는 안전성분석 절차를 제시하였는데 이 안전성 분석 절차를 철도건널목에 적용함으로써 시스템의 위험요인을 분석하고, 이에 대한 원인 및 결과, 손실을 도출한 후 대책을 제시할 수 있었다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1389-1396
• /
• 2008

There are many studies on the ride comfort for the train from the viewpoint of passenger. But there are only a few studies on the ride comfort for engineers in the locomotive. The railway has the track conditions, such as irregularities, rail joints, turnout, level crossing, transition curves and super-elevation ramps, which cause vibrations. Generally, the ride comfort for the train is evaluated by using the vibrations. In this study, vibration accelerations have been measured in the cabin rooms of locomotives, such as DL(Diesel-electric Locomotive), DHC(Diesel Hyduralic Car) and NEL(New-Electric Locomotive) when running on the Kyoungbu conventional line. And then, their ride comforts has been analyzed and evaluated by statistical method according to UIC 513R.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.3
• /
• pp.141-150
• /
• 2014

A methodology to evaluate the seismic performance of interface piping systems that cross the isolation interface in the seismically isolated nuclear power plant (NPP) was developed. The developed methodology was applied to the safety-related interface piping system to demonstrate the seismic performance of the target piping system. Not only the seismic performance for the design level earthquakes but also the performance for the beyond design level earthquakes were evaluated. Two artificial seismic ground input motions which were matched to the design response spectra and two historical earthquake ground motions were used for the seismic analysis of piping system. The preliminary performance evaluation results show that the excessive relative displacements can occur in the seismically isolated piping system. If the input ground motion contained relatively high energy in the low frequency region, we could find that the stress response of the piping system exceed the allowable stress level even though the intensity of the input ground motion is equal to the design level earthquake. The structural responses and seismic performances of piping system were varied sensitively with respect to the intensities and frequency contents of input ground motions. Therefore, for the application of isolation system to NPPs and the verification of the safety of piping system, the seismic performance of the piping system subjected to the earthquake at the target NPP site should be evaluated firstly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.738-748
• /
• 2012

One of the main goals of small, medium and large farms is to improve the reproductive performance of rabbit does. Stocks of lower productivity can be improved by crossing with intensive breeds. A better nutritional status of both foetuses and suckling kits has a positive effect on their later productivity. Overfeeding young females before first mating can lead to conditions of fattiness. Using restricted feeding or higher fibre content in the feed and changing it for a higher level ad libitum feeding about one week prior to first mating leads to longer lifespan and higher productive level. Intensive reproductive rhythm creates a negative energy balance in does : they are unable to consume enough feed (energy) for the nutritional requirements of foetus and lactation, and therefore lose most of their fat reserves. Furthermore, primiparous does also expend energy because they are still growing. Under intensive conditions, the 42-d reproductive rhythm (re-mating 11 days after parturition) is recommended. Under extensive conditions, the 18 or 25-d mating interval with 35 to 42-d weaning could be suitable. On small farms, natural mating is favoured; on large farms AI is commonly employed. The main advantage of AI is the all-in, all-out system. Hormonal (PMSG) treatment is used with AI to increase receptivity on d 11. Frequent and high level PMSG use can lead to higher anti-PMSG antibody rates. Lower level (max. 20 IU) and less frequent PMSG injection or non-hormonal alternative methods (short dam-litter separation, changing nursing method or lighting programs) are recommended for this reason.

• Horticultural Science & Technology
• /
• v.35 no.2
• /
• pp.276-286
• /
• 2017

Licorice, a traditional Korean medicinal plant, is recognized for its main active ingredient, glycyrrhizin. The level of glycyrrhizin in Chinese licorice (Glycyrrhiza uralensis) is lower than the reference level (2.5%) set by the Korean Pharmacopoeia, reducing its value as a medicinal herb. In this study, we aimed to overcome this problem by generating an interspecific licorice hybrid by crossing European licorice (G. glabra) with Chinese licorice, resulting in the production of 32 $F_1$ lines. A comparison of genetic traits revealed variations in glycyrrhizin content among lines, ranging from 1.5 to 5.6%, with a mean value of 3.2%; these values are higher than that of the parental plants. Additionally, 25 lines (78.1%) had a glycyrrhizin content greater than 2.5%, which is higher than the reference level set by the Korean Pharmacopoeia. Four of these lines had glycyrrhizin levels higher than the WHO recommended level of 4.0%. A comparison of phenotypic characteristics showed that the leaves of the hybrids possessed all of the characteristics of European and Chinese licorice; however, the stems of most hybrids had characteristics of European licorice. Finally, we determined the genetic distances of 34 samples of Glycyrrhiza plants (parents, 32 $F_1$ lines) by random amplified polymorphic DNA (RAPD); the $F_1$ lines showed a close genetic distance. We plan to develop to a cultivar using five of these lines (glycyrrhizin content < 4.0%).

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.83-88
• /
• 2004

Magnetism of molecular nanomagnet, which attracted a lot of academic attention after the discovery of the macroscopic quantum tunneling of magnetism, is reviewed. Molecular nanomagnet is metal-organic material in which magnetic ions are regularly located in the organic skeleton. Also, the interaction between the molecules is very small and those molecules form macroscopic molecular crystal in which molecules are residing at the element points in the crystal. Molecular nanomagnets show a lot of interesting features, especially, equivalence of macroscopic magnetic properties and molecular magnetic properties. In this paper, research results on molecular nanomagnet with microscopic tool like NMR are reviewed mainly. The new method to observe the quantum tunneling of magnetization discovered in Mnl2-ac with NMR is shown and the research results on the microscopic aspects of the macroscopic quantum tunneling of magnetization using the new method are shown. Also, the physical aspect of the level crossing effect which has been reported originally with NMR in molecular nanomagnet is reviewed with experiment results. The research results on the molecular nanomagnets will reveal the important information about the limit of the miniaturization of magnetic memory units and give us the basic scientific knowledge which is needed for the application for the quantum computation. Moreover, academically, many quantum mechanical theories which have not been checked the validity can be checked with experiments.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2008

The purpose of this study was to investigate the effect of different obstacle heights on the plantar foot pressure during obstacle crossing. Sixteen healthy adults who had no musculoskeletal disorders were instructed to perform unobstructed level walking and to step over obstacles corto 10cm, 20cm, 30cm. Plantar foot forces and pressures were recorded by the Footmat system(Tekscan, Boston, USA) during level and obstacle walking with barefoot. Plantar foot surface was defined as seven regions for pressure measurement; two toe regions, three forefoot regions, one midfoot region, one heel region. One-way ANOVA was used to compare each region data of foot according to various heights. The results indicated that there are significant differences on peak pressure and maximal forces regarding each region at stance phase. As height of obstacle became high, the pathway of COP had a tendency to be short and abducted. Plantar pressure of foot could be changed by obstacle height and these findings demonstrated that obstacle with different height have an effect on structure and function of the foot.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.407-413
• /
• 2011

This paper presents an electrical power monitoring system for home energy management and an automatic appliance-identification algorithm based on the electricity-usage patterns collected during the monitoring tests. This paper also discusses the results of the field tests of which the proposed system was voluntarily deployed at 13 homes. The proposed monitoring system periodically measures the amount of power consumption of each appliance with a pre-specified time interval and effectively displays the essential information provided by the monitored data which is required users to know in order to save power consumption. Regarding the field tests of the monitoring system, the households responded that the system was useful in saving electricity and especially the electricity-usage patterns per appliances. They also considered that the predicted amount of the monthly power consumption was effective. The proposed appliance-identification algorithm uses 4 patterns: Zero-Crossing Rate(ZC), Variation of On State(VO), Slope of On State(SO) and Duty Cycle(DC), which are applied over the 2 hour interval with 25% of it on state, and it yielded 82.1% of success rate in identifying 5 kinds of appliances: refrigerator, TV, electric rice-cooker, kimchi-refrigerator and washing machine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.7-14
• /
• 1972

Four treatment leveles(check 500, 1, 000 2, 000ppm) of Ethrel were applied to barley and wheat grown in greenhouse and fields at three stages (preboot, boot, afterboot) of growth in orderd to induce male sterility and to evaluate possibility of practical $F_1$-hybrid-seed production as gametocide. The results are summarized as follows. 1. The shortening plant height, especially the first internode length. spike length and decreasing 1, 000 seeds weight and induction of male sterility, were observed with all Ethrel theatments. The earier the stage of spraying at the boot and the higher concentration of Ethrel, the greater effects were observed. 2. The most practical level of inducing male sterility occurred ranging from 1, 000-2, 000ppm applied at all stages, while with increasing maturity, greater concentration of Ethrel were required to induce the same level of male sterility. .3. Great differences for male sterility per spike in bagged and unbagged spikes were shown with all treatments indicated ovary receptiveness, and that out-crossing has taken place, 4. Ethrel treatment induced more practicable extent of male sterility in barley than wheat. This results indicated that $F_1$-hybrid-seed production in barley with gametocide appears feasible if high combining ability lines were selected for increased out-crossing ratio. 5. There seemed to be no indication of additive surfactant influence on the Ehrel action in the present studies, and showed an interest on further studies on this matter.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.239-246
• /
• 2017

In case of observing only wave height and period in the field, various wave characteristics are mainly calculated by wave by wave analysis method. In this paper, an wave by wave analysis program using MATLAB language is developed. It is possible to perform a function such as 1) correction for mean water level, 2) calculation for zero crossing time, 3) calculation for individual wave height, 4) time interval by using zero upcrossing and downcrossing method. The applicability of the developed program to the data of 0.2 second interval observed by using the WaveGuide Radar installed on HeMOSU-1 was examined. Tidal level variation removal and zero crossing time estimation were determined by linear or quadratic interpolation. It was judged that the Goda method was appropriate for calculating individual wave height, and the method proposed in this study seems to be improved through subsequent research. Due to the fineness of the sample, it can be seen that characteristics of representative waves are different from the results calculated by zero upcrossing and downcrossing method.