• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.263-271
• /
• 2001

Blast-vibration tests were carried out to determine the effects of the number of free face on the level of blast vibration. Frequency chatacteristics were also examined by using FFT analysis. To check the effects of the number of free face, charge weight per delay, drilling length, burden and space were applied uniformly and the number of free face was only changed from one to four. The results from tests were checked by regression analysis and K-value.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.73-80
• /
• 2007

Robust Design(RD) is a cost-effective methodology to determine the optimal settings of control factors that make a product performance insensitive to the influence of noise factors. To better facilitate the robust design optimization, a dual response surface approach, which models both the process mean and standard deviation as separate response surfaces, has been successfully accepted by researchers and practitioners. However, the construction of response surface approximations has been limited to problems with only a few variables, mainly due to an excessive number of experimental runs necessary to fit sufficiently accurate models. In this regard, an innovative response surface approach has been proposed to investigate robust design optimization problems with larger number of variables. Response surfaces for process mean and standard deviation are partitioned and estimated based on the multi-level approximation method, which may reduce the number of experimental runs necessary for fitting response surface models to a great extent. The applicability and usefulness of proposed approach have been demonstrated through an illustrative example.

• Journal of the Korean Home Economics Association
• /
• v.42 no.9
• /
• pp.195-212
• /
• 2004

The purpose of this study was to analyze consumers' perceived risk and information search behaviors in internet shopping. For this purpose, survey was conducted on 302 consumers in their 20s and 30s who had internet shopping experience. This study found that consumers' perceived risk was significantly related to their gender, educational level, income, credit card use, period of internet un, number of internet shopping experiences, and purchased product. Consumers' search behaviors were also significantly affected by gender, age, educational level, income, period of internet use, and purchased product. In addition, a higher level of consumers' perceived risk was significantly related to the amount of information search on product attributes themselves rather than on general information search such as the number of sites or the number of brands.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2568-2573
• /
• 2008

A drop impact on the liquid film/pool generates several phenomena such as the drop floating, bouncing, formation of vortex ring, jetting, bubble entrapment and splashing. These phenomena depend on the impact velocity, the drop size, the drop properties and the liquid film/pool thickness. These parameters can be summarized by four main dimensionless parameters; Weber number, Ohnesorge number, Froude number and non-dimensional film/pool thickness. In the present study, the phenomena of the splashing and bubble entrapment due to the drop impact on the liquid film/pool were numerically investigated by using a Level Set method for the sharp interface tracking of two distinct phases. After the drop impact, the splashing phenomena with the crown formation and spreading were predicted. Under the specific conditions, the bubble entrapment at the base of the collapsing cavity due to the drop impact was also observed. The numerical results were compared to the available experimental data showing good agreements.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.67-85
• /
• 1988

This study focused o investigating the variables dauther-in-law and mother-in=-law's subjective household crowding. And which is the best index among space per person, persons per room, and the number of family members was the next issue. the results of this study were as follows. 1. Variables that effected on the dauther-in-law's subjective household crowding were expectation about the number of rooms, the educational level of the dauther-in-law, duration of marriage, educational level of mother-in-law, space per person. In the case of mother-in-law, these were duration of marriage, space per person, expectation about the number of rooms, educational level of mother-in-law. 2. The best objective household crowding index was the space per person. Finally we need to look at the suv-dimension that composed of subjective household crowding of the old.

• Korean Management Science Review
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2005

This paper proposed a quantitative evaluation method to measure the operational effectiveness of the local military manpower administrations. The proposed method compared the relative operational effectiveness level for 12 local military manpower administrations in Korea.. The method used the IDEA (imprecise Data Envelopment Analysis) model which Is able to measure relative operational effectiveness level, and also used two input variables (labor cost, operational cost) and three output variables (number of military applicants, number of civil application approved & processed, management accuracy level). Through the model output analysis, we presented the relative effectiveness scores, the reason for non-effectiveness, and the relationship between non-effective ness level and input/output variables for each local military manpower administration. We also presented a few recommendations how to improve the effectiveness level on particular local military manpower administration.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.1
• /
• pp.98-106
• /
• 1996

An irrigation scheduling model, IRIS developed to evaluate irrigation demand and irrigation time for upland crops. For IRlS modeling the soil moisture simulation model, SWATRER was adopted and modified. The developed model, IRIS operated under 5 different soil moisture level that is 20%, 40%, 60%, 80% of available soil moisture and optimum soil moisture level, OSML, which is different about the growing stage and no rainfall condition during growing period. As a result for IRIS simulation, irrigation demand for 5 different soil moisture level was 332.3, 409.8, 569.3, 732.2, 539.3mm, irrigation number was 5, 8, 18, 54, 16 times and irrigation interval during peak time of consumptive use was 20, 13, 6, 2, 6 days respectively. It is appeared that the higher soil moisture level the more irrigation demand and irrigation number and the higher soil moisture level the less irrigation interval.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.711-717
• /
• 2000

This paper presents an experimental study on evaluation of structural performance on corroded reinforced concrete columns under only axial load, combined axial load and lateral load. This test was carried on the twenty-six reinforced concrete columns with $150\times150\times800$mm size subjected to combined axial load and lateral load. Effects of key variables such as the corrosion level, the number of hoop, the corrosion of hoop are studied in this program. The results of this study show that the capacity of column axial force was decreased as corrosion level was increased, especially, rapid development was shown after 10% corrosion level and the maximum moment capacity of column was shown at corrosion level 1.2%, while rapid decrease was shown after 4.3% corrosion level. Also we found that influence of corrosion was decreased to number of tie bar was increased.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.173-175
• /
• 2007

The lexical decision task (LDT) commonly postulates the activation of semantic level. However, there are few studies for the feedback effect from semantic level. The purpose of the present study is to investigate whether the feedback effect from semantic level is facilitatory or inhibitory in Korean LDT. In Experiment 1, we manipulated the number of phonological syllable neighbors (PSN) and the number of semantic neighbors (SEN) orthogonally while orthographic syllable neighbor (OSN) is dense. In the results, the significant facilitatory effect was shown in words with many SEN. In Experiment 2, we examined same conditions as Experiment 1 but OSN was sparse. Although the similar lexical decision latency pattern was shown, there was no statistical significance. These results can be explained by the feedback activation from semantic level. If a target has many SENs and many PSNs, it receives more feedback activation from semantic level than a target with few SENs and PSNs.