• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.404-410
• /
• 2001

A new thermal type fluid level transmitter was designed and tested at the HITROL R&D institute. The relation of heat transfer and electric resistance was adopted as an operation principle. The length of a fabricated level transmitter was two meters and a water under normal temperature was used as a working fluid for the experiment Finally, the new product could have a high precision, acceptable accuracy and reasonable response time. Foreign-made level transmitter of this type is under in use for measuring water level of containment building in nuclear power plants so far. It is expected that new product will substitute it.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.326-334
• /
• 2016

In this paper for developing and implementing the realtime HD level video streaming transmitter which is operated on the multi-platform in all network and client environment compared to the exist video live streaming transmitter. We design the realtime HD level video streaming transmitter supporting the multi-platform using the TMS320DM386 video processor of T.I company and then porting the Linux kernel 2.6.29 and implementing the RTSP(Real Time Streaming Protocol)/RTP(Real Time Transport Protocol), HLS(Http Live Streaming), RTMP(Real Time Messaging Protocol) that can support the multi-platform of video stream protocol of the received equipments (smart phone, tablet PC, notebook etc.). For proving the performance of developed video streaming transmitter, we make the testing environment for testing the performance of streaming transmitter using the notebook, iPad, android Phone, and then analysis the received video in the client displayer. In this paper, we suggest the developed the Realtime HD(High Definition) level Video Streaming transmitter performance data values higher than the exist products.

• 대한전자공학회논문지SD
• /
• 제46권11호
• /
• pp.84-91
• /
• 2009

본 논문은 multi-level signaling을 이용한 high speed serial link transmitter에 관하여 제안하였다. High speed serial link에서 수 Gb/s를 달성하기 위해 4-pulse amplitude modulation (PAM) 을 사용하였다. 4-PAM은 4개의 level로 한 symbol time에 2 bit data를 전송함으로써 binary signaling보다 2배 빠른 data 전송이 가능해졌다. 제안된 4-PAM transmitter는 전압 output 대신 전류 output을 생성하며 이로 인해 driver의 switching time이 빨라져서 더 높은 속도의 transmitter를 구현할 수 있었다. $2^5-1$ pseudo-random bit sequence (PRBS) 생성기는 built-in self test (BIST)를 하기 위해 on-chip으로 설계되었다. 본 연구는 동부 하이텍 $0.18{\mu}m$ CMOS 공정을 통하여 설계되었으며 1.8 V supply voltage에서 eye 크기가 160 mV 이고 최대 동작 속도는 8 Gb/s이다. 칩 전체 면적은 $0.7\times0.6mm^2$이며 전력 소모는 98 mW이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.490-492
• /
• 2010

Center-tapped termination을 가진 stub series-termination logic (SSTL) 채널을 지원하기 위한 전압모드 송신단을 제안한다. 제안하는 송신단은 진단 모드를 지원하고 신호보전성을 향상시키기 위해 출력레벨 조절수단을 가지며, 가변 병렬 터미네이션을 사용하여 swing level을 조절하는 동안 송신단의 출력 저항을 일정하게 유지시켜준다. 또한 제안하는 송신단의 off-chip 저항은 기생 캐패시터, 인덕터에 의한 termination의 임피던스 부정합을 줄여준다. 제안된 송신단을 검증하기 위해서 $50{\Omega}$의 출력저항을 유지하면서 8-레벨의 출력을 제공하는 전압모드 송신단을 1.5V의 70nm 1-poly 3-metal DRAM공정을 이용하여 구현하였다. 수신단 termination이 존재하지 않는 SSTL 채널에서 제안하는출력레벨 조절이 가능한 송신단을 이용함으로 1.6-Gb/s에서 54%의 jitter 감소가 측정되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.281-284
• /
• 2003

Multi-code CDMA is an appropriate scheme for transmitting high rate data. However, dynamic range of the signal is large, and power amplifier with good linearity is required. Code select CDMA (CS/CDMA) is a variation of multi-code CDMA scheme that ensures constant amplitude transmission. In CS/CDMA input data selects multiple orthogonal codes, and sum of these selected codes are MPSK modulated to convert multi-level symbol into different carrier phases. CS/CDMA system employs level clipping to limit the number of levels at the output symbol to avoid hish density of signal constellation. In our previous work we showed that by encoding input data of CS/CDMA amplitude of the output symbol can be made constant. With this coding scheme, level clipping is not necessary and the output signal can be BPSK modulated for transmission. In this paper we show that the constant amplitude coded(CA-) CS/CDMA transmitter can be implemented using only logic gates, and the hardware complexity is very low. In the proposed transmitter architecture there is no apparent redundant encoder block which plays a major role in the constant amplitude coded CS/CDMA.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.149-153
• /
• 2005

The optical fiber micro-cellular system requires the high linearity that determines the quality and capacity of system. Hence, there is a need for improving the linearity in mobile communication system. In order to compensate dispersion-induced signal distortion, we fabricated the optical feedforward transmitter. The compared 3rd-IMD was enhanced by 38 dB for two-tone case and the Adjacent Channel Power Ratio was enhanced by 20 dB for W-CDMA 1 carrier and by 16 dB for W-CDMA 3 carriers. Also, the induced noise level was reduced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.756-760
• /
• 1997

In this research, the automatic level measurement system used in land leveling was developed. By using a laser transmitter and a receiver as measuring equipments, level was measured automatically. The driving part of this system was composed of stepping motor, timing belt and pulley. It drived the laser receiver to track laser beam generated form the laser transmitter. The level measuring experiments were performed about three level change shapes (step, random, sine). This system could measure step level change of which amplitude was 40mm in 0.5s, random level change within .+-. mm, maximum measurement error. In case of sine level change, experiment was executed with varying the spatial frequency of level change. As a result, this system was able to measure sine level change of which spatial frequency was 0.5m $^{-1}$ accurately.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.207-212
• /
• 2019

A flat-type piezoelectric ceramic ultrasonic transmitter was successfully fabricated for application in acoustic devices with cone-free diaphragms. The transmitter, possessing a center frequency of 40.6 kHz, exhibited a higher displacement characteristic for a multilayer type compared with a single layer type. Surface roughness treatment of an Al elastic diaphragm influenced a slight increase (1.1 dB) in the sound pressure level (SPL) at $10V_{rms}$ due to the enlarged surface area. The fabricated multilayer piezoelectric ceramic ultrasonic transmitter showed increasing SPL with increasing input voltage, with a maximum SPL of approximately 123.6 dB at $10V_{rms}$. This implies a doubly increased SPL density of $3.6dB/mm^3$, superior to that of a commercial open-type transmitter with a cone.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.73-76
• /
• 2000

In tendency of digitalization, we studied about the purpose of digital modem for MRI spectrometer and advantage of digital modem compared with analog one. We introduce requirements lot designing transmitter of high speed digital modem for MRl spectrometer We also introduce its top-level and mid-level architecture. The transmitter is composed of CPC-P interface block, DUC & DAC block, RF block, master clock generation block, MCU block. Especially, DUC and its control parts are studied in detail. DUC and DAC can operate up to 52MHz and 100Msps, respectively. However we uses 35MHz as master clock and this paper shows its validity through simulations.

• ETRI Journal
• /
• 제30권4호
• /
• pp.526-534
• /
• 2008

This paper presents a fully integrated 0.13 ${\mu}m$ CMOS MB-OFDM UWB transmitter chain (mode 1). The proposed transmitter consists of a low-pass filter, a variable gain amplifier, a voltage-to-current converter, an I/Q up-mixer, a differential-to-single-ended converter, a driver amplifier, and a transmit/receive (T/R) switch. The proposed T/R switch shows an insertion loss of less than 1.5 dB and a Tx/Rx port isolation of more than 27 dB over a 3 GHz to 5 GHz frequency range. All RF/analog circuits have been designed to achieve high linearity and wide bandwidth. The proposed transmitter is implemented using IBM 0.13 ${\mu}m$ CMOS technology. The fabricated transmitter shows a -3 dB bandwidth of 550 MHz at each sub-band center frequency with gain flatness less than 1.5 dB. It also shows a power gain of 0.5 dB, a maximum output power level of 0 dBm, and output IP3 of +9.3 dBm. It consumes a total of 54 mA from a 1.5 V supply.