• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.147-155
• /
• 1999

The film thickness and shape of elastohydrodynamic lubrication is measured by optical interferometer, which is the most precise method for EHL film measurement. However the interpretation of the image pattern from optical viscometer is not easy for two-dimensional shape. A newly developed method of image processing makes it possible to evaluate the film thickness and shape in every point of contact region with two dimensional aspects. In this study, we captured film shape of EHL film from the monochromatic incident light with the Image processing method, which uses phase shift method, and obtained the image analysis method for gray level image in order to qualitatively evaluate film shapes.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1476-1480
• /
• 1987

This paper proposes a design method for SCLA(sequential CMOS Domino Logic Array) using 1-level CMOS Domino Logic and Stable Shift Register Latch. Also an algorithm to generate a test sequence and a test procedure for the SCLA are presented. The SCLA has advantages of low power consumption, high density and high speed, and performs hazard-and race-free logic operation, because of using SSRL(Stable Shift Register Latch). By using the proposed test method, all of stuck-at, cross-point, stuck-on and stuck-open faults in SCLA are detected by short test sequence.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3265-3268
• /
• 2013

The multi-hydrogen bonded systems with the solvated electrons are investigated at the B3LYP/6-311++$G^{**}$ basis set level. The symmetrical linear geometrical characteristic is common for the dimer systems, while for the tetramer system, the tetrahedron configuration is generated. The NBO charge analyses demonstrate that the multi-hydrogen-multi-electron (mH-ne) coupling exist in these anion systems, as is supported by the electrostatic potential and the molecular orbital analyses. The positive chemical shift value of the central hydrogen ($H_c$) and the negative chemical shift value of the terminal hydrogen ($H_t$) indicate that the $H_c$ is electronegative while the $H_t$ is electropositive, respectively. Strong coupling between two central hydrogen atoms is demonstrated by the large spin-spin coupling constants. The solvated electron donates significant contributions for the stability of these systems.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.417-424
• /
• 1999

Laser lapping of diamond films is performed with focused beam of copper vapor laser. Both spherical and rod-shape laser beam are used. Diamond surface is scanned at various scan speeds(0,125, 0.5, 0.75 mm/sec) and baem shifts (5, 10, 20, 40, 100$\mu\textrm{m}$) At 0.125 mm/sec 10$\mu\textrm{m}$ scan condition the level difference of di-amond surface of about 700$\mu\textrm{m}$ over 20 mm is reduced to 200$\mu\textrm{m}$ In addition surface roughness is also im-proved from 3.53$\mu\textrm{m}$ to 2.47$\mu\textrm{m}$ at 5$\mu\textrm{m}$ beam shift. But at higher beam shift than 10$\mu\textrm{m}$ laser scan makes the surface rougher which is considered to be due to the non uniform spatial distribution of laser en-ergy. It is concluded that homogenized laser beam with high average power is needed for large area laser lapping of diamond films at appreciable rates.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.87-96
• /
• 1993

Spectrum analysis of surface electromyogram (FMG) signals is an effective approach to the study of localized muscular fatigue during isometric contraction. Many investigators have con firmed the frequency of the EMG signals being lowered during sustained contaction. In this study, the cyclic loading tasks were performed, and a comparison was made for the median power frequency shift pattern of the EMG signals with the sustained contraction of the same load. The median power frequency shift of the EMG signals for the cyclic loading task was found to be a part of that for the sustained contraction. Based on this result, a new muscle fatigue index was computed by normalizing the duration of the sustained contraction. A fatigue index was obtained as a function of exertion level and the work/rest schedule. With the proposed fatigue index, it is possible to evaluate or predict the degree of muscular fatigue for a physically demanding task.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.1
• /
• pp.15-18
• /
• 1998

The entanol productivity of superoxide dismutase (SOD)-deficient mutants of Saccharo-Myces cerevisiae was examined under the oxidative stress by Paraquat. It was observed that MnSOD-deficient mutant of S. cerevisiae had higher ethanol productivity than wild type or CuZnSOD-deficient yeast both in aerobic and in anaerobic culture condition. Pyruvated dehydrogenase activity decreased by 35% and alcohol dehydrogenase activity increased by 32% were observed in MnSOD-deficient yeast grown aerobically. When generating oxygen radicals by Paraquat, the ehanol productivity was increased by 40% in CuZnSOD-deficient or wild strain, resulting from increased activity of alcohol dehydrogenase and decreased a activity of pyruvate dehydrogenase. However, the addition of ascorbic acid with Paraquat returned the enzyme activities at the level of control. These results imply that SOD-deficiency in yeast strains may cause the metabolic flux to shift into anaerobic ethanol fermentation in order to avoid their oxidative damages by Paraquat.

• Journal of Korean Institute of Industrial Engineers
• /
• v.6 no.1
• /
• pp.9-15
• /
• 1980

By the mid 1960's the rate of productivity growth in the manufacturing industries of the United States reached the lowest level ever recorded in the American economy. As a result the cost-offsetting operations that had been a century-long part of cost minimizing became less feasible. U.S. manufacturing firins apparently embarked on a pattern of a cost pass-along management. Accounting for price variation as a function of a shift from cost minimizing to cost pass-along is the main subject of this investigation. An econometric model of the inflation process is presented which indicates a clear shift in the modal behavior of manufacturing industries from cost minimizing (1948-1964) to cost pass-along (1965-1975). The latter behavior, initially triggered by the drag of resource diversion on the productivity growth process, undermines the pressure toward productive efficiency that is at the core of industrial engineering, and at the center of U.S. industry's ability to remain competitive.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.392-395
• /
• 2003

This paper describes a new iris segmentation and recognition method, which is robust to noises. Combining statistical classification and elastic boundary fitting, the iris is first segmented. Then, the localized iris image is smoothed by a convolution with a Gaussian function, down-sampled by a factor of filtered with a Laplacian operator, and quantized using the Lloyd-Max method. Since the quantized output is sensitive to a small shift of the full-resolution iris image, the outputs of the Laplacian operator are computed for all space shifts. The quantized output with maximum entropy is selected as the final feature representation. An appropriate formulation of similarity measure is defined for the classification of the quantized output. Experimentally we showed that the proposed method produces superb performance in iris segmentation and recognition.

• Journal of Drive and Control
• /
• v.10 no.4
• /
• pp.7-13
• /
• 2013

A tractor is a farm vehicle that is designed to provide a high tractive effort at low speed. It is used for versatile agricultural tasks such as hauling a trailer, tillage, mowing and construction work. As the intensity of work increases, tractors equipped with automatic transmission become popular due to the work convenience. Though manual and power shuttle transmissions are produced by domestic corporations, development for full-automatic power shift transmissions has never been challenged, and so related technology level is quite low. This paper gives a survey of the automatic transmissions from advanced foreign company, which includes layout of gear train, the way hydraulics controls clutches and brakes, electronic control system. The results are expected to be utilized as a basis in the development of original power train design for tractor.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.44-48
• /
• 2015

Housing price is a key indicator of housing demand. Actual Transaction Price Index of Apartment (ATPIA) released by Korea Appraisal Board is useful to understand the current level of housing price, but it does not forecast future prices. Big data such as the frequency of internet search queries is more accessible and faster than ever. Forecasting future housing demand through big data will be very helpful in housing market. The objective of this study is to develop a forecasting model of ATPIA as a part of forecasting housing demand. For forecasting, a concept of time shift was applied in the model. As a result, the forecasting model with the time shift of 5 months shows the highest coefficient of determination, thus selected as the optimal model. The mean error rate is 2.95% which is a quite promising result.