• Journal of Fisheries and Marine Sciences Education
• /
• v.13 no.1
• /
• pp.99-116
• /
• 2001

Testing is a procedure used to measure a sample of behaviour in order to discover how well a seafarer performs, usually in comparison with others, or compared with identified performance criteria. In this context It is important that the test, in whatever form it is being used, yields consistent results by being valid, reliable and practical. Whilst we can only take a sample of a person's knowledge or comprehension about topic in this way, testing methods do provide a more reliable estimate of performance than most other observational techniques; unsystematic or irregular observation being too unreliable. The method of examination has been specified in the provisions of Regulation 12 of the Decree of the ship officers act as followings. Other necessary matters for conducting oral and written examinations have been set out by the Minister. But written examination is too shortage of period and small number of question to cover the qualification of each level and oral test is just simple and namely Traditionally, written examinations have been provided as the only means for determining the acquisition of knowledge by the mariner. Typically, the examination formats have taken the format of either an essay or multiple choice examinations. Essay items, used in the vast majority of subject examination(not in Korea), consisted of three basic types: situational, descriptive and computational. The level of certificate being examined determined the number and mix of the type of essay questions selected. Oral question has again been used by assessors of seafarer in a wide variety of contexts. Also, oral questioning is often used when observation of performance is undertaken to ask why a certain action has been taken, or to be broaden the scope of what has been observed. At end, Each techniques have their own advantage and disadvantage, so we have to choose some or all of the following techniques, depending upon the certificate, qualification or job for which the trainee is aiming. But in high lank, we have to use both of essay type and multiple choice and with enough time of oral test at least 30 minutes. Who would be the assessor? According to the STCW Code Section A-I/6, instructors, supervisor and assessors are appropriately qualified for particular types and levels of training or assessment of competence of seafarers either on board or ashore, as required under the Convention, in accordance with the provisions of this section.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.537-545
• /
• 2018

Determination of the time parameters such as the travel time in the design flood is very important. The travel time is mainly used for flood and river management, and the travel time of non flood season is used for maintenance flow and management of the river. Estimation of travel time for natural rivers is mainly based on the geomorphological factors of the basin. In addition to the topographical factors, the travel time is calculated by considering the factors of the runoff curve, velocity and rainfall intensity. However, there is no study on the estimation of travel time considering both the rainfall condition and the soil moisture accounting by the frequency period. Therefore, the travel time calculation is divided into the case of setting the Hwanggang Dam and the Imjin bridge water level station of Imjin river as the natural river considering rainfall condition by the frequency period and the soil moisture accounting, and the case of traveling the Imjin bridge water level station according to the condition of outflow of the Hwanggang Dam. For the sections set as natural rivers, the results were verified by comparing with the newly developed travel time calculation method. Based on the results, the travel times of the Hwanggang Dam outflow conditions were calculated. The time to travel in this study can be secured flood control of the Imjin river basin and time to prepare for danger when outflowing the the Hwanggang Dam.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.829-835
• /
• 2000

The ptsH and ptsI genes of Lactococus lactis subsp. lactis ATCC 7962 (L. lactis 7962), encoding the general proteins of phosphotransferase system (PTS) components, HPr and enzyme I, respectively, were cloned and characterized. A 1.3 kb PCR product was obtained using a primer set that was hybridized to the internal region of the L. lactis 7962 pts HI genes and then subcloned into a low-copy number vector, pACYC184. The 5' upstream and 3' downstream region from the 1.3 kb fragment were subsequently clone using the chromosome walking method. The complete ptsHI operon was constructed and the nucleotide sequences determined. Two ORFs corresponding to HPr (88 amino acids) and enzyme I (575 amino acids) were located. The ptsHI genes of L. lactis 7962 showed a very high homology (84-90%) with those genes from other Gram-positive bacteria. A primer extension analysis showed that the transcription started at either one of two adjacent bases upstream of the start codon. Using a Northern analysis, two transcripts were detected; the first, a 0.3 kb transcript corresponding to ptsH and the second, a 2 kb transcript corresponding to ptsH and ptsI. The transcription level of ptsH was higher than that of ptsI. The concentration of the ptsH transcript in cells grown on glucose was similar to that in cells grown on lactose, yet higher than that in cells grown on galactose. The ptsI transcript was scarcely detected in cell grown on lactose or galactose. The ptsI transcript was scarcely detected in cells grown on lactose or galactose. The results of a sequence analysis and Northern blot confirmed that the ptsH and ptsI genes of L. lactis 7962 were arranged in an operon like other known ptsHI genes and the expression of the ptsHI genes was regulated at the transcriptional level in response to the carbon source.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.362-369
• /
• 2014

This study aimed to propose an accurate diagnostic method for osteoporosis by realizing a computer-aided diagnosis system with the application of the statistical analysis of texture features using digital images of lateral lumbar spine of patients with osteoporosis and providing reliable supplementary diagnostic information by model experimental research for early diagnosis of diseases. For these purposes, digital images of lateral lumbar spine of normal individuals and patients with osteoporosis were used in the experiments, and the values of statistical texture features on the set ROI were expressed in six parameters. Among the texture feature values of the six parameters of osteoporosis, the highest and lowest recognition rates of 95 and 80% were shown in average gray level and uniformity, respectively. Moreover, all the six parameters showed recognition rates of over 80% for osteoporosis: 82.5% in average contrast, 90% in smoothness, 87.5% in skewness, and 87.5% in entropy. Therefore, if a program developing into a computer-aided diagnosis system for medical images is coded based on the results of this study, it is considered possible to be applied to preliminary diagnostic data for automatic detection of lesions and disease diagnosis using medical images, to provide information for definite diagnosis of diseases, to diagnose by limited device, and to be used to shorten the time to analyze medical images.

• Journal of Korean Academy of Nursing
• /
• v.26 no.1
• /
• pp.15-32
• /
• 1996

The clinical practice program for home care nurses was implemented in June 1994, to help to set up a hospital-based home care system in the Kwangju City area as a collaborative work between the Department of Orthopedic Surgery at Chunnam University Hospital and Chunnam University School of Nursing. Under the developed clinical practice strategy, the eight week training was given to five licensed home care nurses who had completed Part I and II of the home health care nursing practicum from June 1994. The purpose of this descriptive evaluation study was to identify the effectiveness of the clinical practice program for home care nurses specialized in the area of patient care for people with musculoskeletal function impairment. As a method in data analysis, data triangulation was used in the five home care nurse case evaluations. The variety of data analyzed include confidence score by home care nurse self-evaluation, patient and family member satisfaction scores, and competency score by preceptor evaluation. The study findings revealed that an increase rate in nursing performance didrate necessarily coincide with an increase not in competency score and also, not with the patient /family member satisfaction scores. And an order derived from the clinical performance scores of five home care nurses corresponded to those from three measurements-competency score, patient satisfaction score, and family member satisfaction score. However, it differed from the order associated with the confidence score. Consistency derived from the three objective evaluation methods may lead to the possibility that the level of competency measured by educator can be further explained by the levels of patient/family member satisfaction. The salient finding of this study was that, in case of nurse A who have had little clinical experience in the orthopedic patient care, there was a significant increase in the level of confidence and competency in subscale of professional skill with the home care clinical practice. Therefore, the effect of the clinical practice program would be successful for nurses who have had little experience in the area of specialization. The study results suggest that there might be some time difference in the development of cognitive sense (confidence) in performance and actual clinical performance (competency). In future research, relationships between the confidence and competency score, and between the confidence score and the patient satisfaction score should to be measured in different time frame to achieve a better explanation power of the study outcome.

• Physical Therapy Korea
• /
• v.19 no.4
• /
• pp.24-31
• /
• 2012

The aim of this study was to investigate the effectiveness of self-stretching exercises for iliotibial band (ITB) (Side-lying; right hip and knee were flexed to support the pelvis while left hip was extended and adducted, Standing A; side-bending of the trunk on standing with crossed leg, Standing B; same as Standing A, except the hands were clasped overhead and shifted right side, and Standing C; same as Standing B, except moving the arms diagonally downward) to help determine the most effective self-stretching method to stretch ITB. Twenty-one healthy subjects who do not have ITB shortness from Yonsei University (14 men and 7 women) between the ages of 18 to 28 years voluntarily participated. Ultrasound was performed to measure the thickness of the ITB between the long axis of the ITB and the level parallel to the lateral femoral epicondyle during four self-stretching exercises. All data were found to approximate a normal distribution. We used a one-way repeated-measures analysis of variance (ANOVA) to compare the thickness of the ITB among all self-stretching exercises. The level of significance was set at ${\alpha}$=.05. The ANOVA was followed by Bonferroni's correction. The overall mean of ITB thickness was $1.14{\pm}.4$ mm (${\pm}$ standard deviation) in resting status. The change in the ITB thickness in percentages between the tested position of each self-stretching exercises and resting status was significant (p<.05) (Side-lying $26.62{\pm}10.18%$ with 95% confidence interval [CI]=21.99~31.25%; Standing A $29.46{\pm}16.19%$ with 95% CI=22.09~36.84%; Standing B $44.06{\pm}14.82%$ with 95% CI=37.31~50.81%; Standing C $53.76{\pm}12.1%$ with 95% CI=48.25~59.29%). Results indicated significant differences among four self-stretching exercises except Side-lying versus Standing A (p<.01). Based on these findings, the Standing C self-stretching exercise was the most effective in stretching the ITB thickness among four types of ITB self-stretching exercises. Additionally, the Side-lying self-stretching exercise using gravity to stretch the ITB is recommended as a low-load (low-intensity), long-duration stretch.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.67-75
• /
• 2014

In this study, the staged seismic performance evaluations were conducted to the 91 high speed railway tunnels in use for checking whether to comply with the recent design criteria or not. In addition, the seismic fragility functions of the tunnels were developed to allow the probabilistic risk assessment. The results of the staged seismic performance evaluations which consist of a preliminary assessment and a detailed assessment, show that the tunnels comply with the recent design criteria. With reference to the results of previous studies, a form of the proposed seismic fragility functions was set as a log-normal distribution by PGA, and the parameters of the functions were determined by using the probability of damage for the design PGA level. The seismic fragility functions were developed for each types (Cut & Cover, NATM) of tunnels. The seismic fragility functions from this study and the existing research results (FEMA, 2004) were compared to evaluate the seismic performance level of the tunnels, as a result the tunnels of this study were relatively superior to the ASSM tunnels on the seismic performance.

• Journal of agricultural medicine and community health
• /
• v.43 no.2
• /
• pp.63-73
• /
• 2018

Objectives: The purpose of this study was to review the disaster preparation and response programs and the status of disaster preparation in public health center. Methods: In depth interview was performed in September 2017 using 5 open questions to the persons who are in charge of disaster response services in 5 public health centers of different levels in Korea. The questions included general characteristics of public health center, disaster programs and future issues. The research hired a quality method. Results: In general, the persons in charge recognized the cooperative agency of local government in disaster management. There were no disaster preparation programs developed by the public health centers. Most of the preparation were passive activities such as emergency support, crisis management on communicable disease and quarantine, participation in biological disaster response training, and education etc. The persons in charge emphasized necessity of disaster preparation programs. Conclusions: Disaster preparation and responsiveness is an evolving issue in public health centers in Korea. Medical support system and communicable disease management system are being set up in the national level. A comprehensive system covering health management, nutritional support, mental health, environment management of shelter, and volunteers supports on public health center level needs to be developed along with a easy-to-follow manual.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.430-430
• /
• 2008

Using multi plasma enhanced chemical vapor deposition system (Multi-PECVD), p-a-Si:H deposition layer as a $p^+$ region which was annealed by laser (Q-switched fiber laser, $\lambda$ = 1064 nm) on an n-type single crystalline Si (100) plane circle wafer was prepared as new doping method for single crystalline interdigitated back contact (IBC) solar cells. As lots of earlier studies implemented, most cases dealt with the excimer (excited dimer) laserannealing or crystallization of boron with the ultraviolet wavelength range and $10^{-9}$ sec pulse duration. In this study, the Q-switched fiber laser which has higher power, longer wavelength of infrared range ($\lambda$ = 1064 nm) and longer pulse duration of $10^{-8}$ sec than excimer laser was introduced for uniformly deposited p-a-Si:H layer to be annealed and to make sheet resistance expectable as an important process for IBC solar cell $p^+$ layer on a polished n-type Si circle wafer. A $525{\mu}m$ thick n-type Si semiconductor circle wafer of (100) plane which was dipped in a buffered hydrofluoric acid solution for 30 seconds was mounted on the Multi-PECVD system for p-a-Si:H deposition layer with the ratio of $SiH_4:H_2:B_2H_6$ = 30:120:30, at $200^{\circ}C$, 50 W power, 0.2 Torr pressure for 20 minutes. 15 mm $\times$ 15 mm size laser cut samples were annealed by fiber laser with different sets of power levels and frequencies. By comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 50 mm/s of mark speed, 160 kHz of period, 21 % of power level with continuous wave mode of scanner lens showed the features of small difference of lifetime and lowering sheet resistance than before the fiber laser treatment with not much surface damages. Diode level device was made to confirm these experimental results by measuring C-V, I-V characteristics. Uniform and expectable boron doped layer can play an important role to predict the efficiency during the fabricating process of IBC solar cells.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).