• 제목/요약/키워드: Levee Design

검색결과 63건 처리시간 0.025초

Utilizing Concept of Vegetation Freeboard Equivalence in River Restoration

  • Lee, Jong-Seok;Julien, Pierre Y.
    • International Journal of Contents
    • /
    • 제8권3호
    • /
    • pp.34-41
    • /
    • 2012
  • The concept of vegetation freeboard equivalence (VFE) is presented from the comparison between the rise in stage with/without vegetation and the freeboard height under design discharge conditions. In South Korea, the freeboard height of large, medium and small rivers is defined as a function of river discharge. Two models are used for this analysis of flood stage with and without vegetation: the 1-D model HEC-RAS and the 2-D model RMA-2. Both models are applied to three river study sites of the Geum River in South Korea as representative sites for a large, a medium and a small river. The analysis shows that without vegetation, both models provide comparable results and the calculated results are in very good agreement with the design configuration. The vegetation effects on the medium river are less significant, and the freeboard is adequate to contain the rise in stage from the added floodplain vegetation in large rivers. The concept of vegetation freeboard equivalence is therefore useful for the analysis of flood river stages after the restoration of channels with increased floodplain vegetation.

저소음형 유압 브레이커의 음향-진동 설계 및 개발 (Vibro-acoustic Design and Development of a Low-noise Hydraulic Breaker)

  • 이종화;이정권;박성하;하태광;임종혁
    • 한국소음진동공학회논문집
    • /
    • 제11권5호
    • /
    • pp.148-155
    • /
    • 2001
  • Hydraulic breaker is currently used for many civil engineering areas owing to the ease of changing the tooling mechanism. However, due to a high noise level, it has been one of notorious sources of environmental noise and the prevailing environmental concerns force the manufacturers to reduce the radiated noise levee during operations. To comply with such concerns, the present study is focused on designing and developing a low-noise hydraulic breaker For this purpose, sound sources are identified and relative contributions are rated. Acoustic enclosure. sealing systems, and low-nolle type chisel have been developed and applied to the actual machine. As a result, the radiated noise from the developed low-noose hydraulic breaker is reduced more than 13 dB(A) In comparison with the conventional hydraulic bleaker.

  • PDF

하천설계기준의 만곡부 수면형 결정 방법에 대한 적용성 검증 (Compatibility inspection for the way for Decision about Bight Flow Profile of Standard River Design)

  • 최한규;채홍기;백효선
    • 산업기술연구
    • /
    • 제26권B호
    • /
    • pp.43-51
    • /
    • 2006
  • Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction rate of maximum 59% as the result of comparing with one-dimensional number interpretation since the reduction rate of safe room height was 20%, in 500 CMS of flood water quantity when we planted the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in Jess than 90 degree angle.

  • PDF

하천제방 침식에 대한 설계기법 검토 (Design Techniques for Levee Erosion)

  • 윤광석;이성준
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2004년도 학술발표회
    • /
    • pp.506-511
    • /
    • 2004
  • 본 연구에서는 제방의 침식에 대한 안정성 평가를 위하여 일본의 하천제방설계지침에서 사용하고 있는 설계기법을 도입하여 적용하였다. 일본은 호안 설계에 있어서 성능 규정에 의한 내력 및 외력을 산정하여 호안공의 안정성을 정량적으로 판단하고 있다. 국내 하천설계기준에서는 침식에 대해 호안을 설치토록 하고 있으나 확실한 안전성 평가기법은 제시되어 있지 않은 실정으로 호안공은 유속이 3m/s이상에서 설치하도록 제시하고 있어 호안공별 설계기준이 경험에 의존하게 된다. 이에 대해 정량적인 설계가 필요하며 적용성 검토를 위하여 2002년 대풍 '루사'와 2003년 태풍 '매미'에 의해 침식피해가 발생한 지점에 대해서 현장조사를 수행하고, 이를 정량적으로 해석함으로써 침식에 대한 설계기법에 대한 검토를 수행하였다. 본 연구에서는 제방 비탈면이 식생으로 보호된 경우와 호안공(호안블럭, 돌망태 등)이 설치된 경우에 대해서 안정성을 해석하였으며, 내${\cdot}$외력 산정에 의한 안정성 평가의 적용성을 확인하였다.

  • PDF

하천 제방의 침투 파괴에 대한 대책공 설계방법 고찰 (A Study on Levee Infiltration Failure and Design of Countermeasures)

  • 이남주;류권규;이상호
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.1857-1861
    • /
    • 2010
  • 이 연구는 하천 제방의 누수 문제에 대해서, 누수의 실태, 대책공 및 조사 방법에 관한 사례를 수집 정리하는 동시에, 이들 사례에 기반한 누수 특성, 하천 특성에 따른 대책공 및 조사 방법에 대해서 검토하기 위한 목적으로 수행하였다. 제방 누수는 일반적으로는 하천수가 제체 또는 기초 지반에 침투해서 제방의 제내 비탈면, 제내 비탈끝 또는 제내지에서 스며나오는 현상을 총칭하며, 각 누수 형태의 개념과 특징을 정리하였다. 1987년 일본의 건설성 하천국의 토목연구소에서 수행한 약 300건의 누수사례에 관한 검토보고서를 참고하여 일본의 하천 제방의 누수 특징을 요약 정리하였다. 제방의 침투/누수 대책 공법을 4가지로 분류하여 특징을 정리하였다. 하천 제방의 제체 누수에 대한 제방 강화 대책 공법의 선정 과정 및 지침을 제시하고자 한다.

  • PDF

실측에 의한 표준관입시험 함마의 낙하속도 분석 (Evaluation of the Falling Velocity of SPT Hammer via Actual Measurement)

  • 이명환;이원제
    • 한국지반공학회지:지반
    • /
    • 제8권1호
    • /
    • pp.59-66
    • /
    • 1992
  • 표준관입시험 결과인 N값은 여러가지 요소들에 영향을 받으며 그 중 함마의 낙하에너지는 가장 큰 영향을 주는 것으로 알려져 있다. 에너지 수준이 상이한 상태에서 측정한 N값을 표준값을 기준으로 한 일반적인 해석에 적용할 경우에는 기초의 안전을 위협하거나 과잉설계를 유발할 수 있다. 본 연구에서는 SPT 함마의 낙하속도를 측정 함으로써 함마의 낙하에너 지를 간접적으로 계산하였다. 분석 결과 우리나라의 N값은 국제적 인 표준 값으로 인정되는 Nu과는 차이가 있는 것으로 나타나 해석 또는 설계시 필수적으로 고려되어야 할 것으로 판단된다.

  • PDF

치환율에 따른 심층혼합 처리공법의 최적 설계 (The Best Design of the Deep Mixing Method by the rate of substitution)

  • 박춘식;이준석;정원섭
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.123-131
    • /
    • 2009
  • 본 연구에서는 2차원 및 3차원 유한요소 해석을 이용하여 심층혼합처리 공법에 의한 연약지반 개량시 개량 심도를 결정 하였고, 그 결과는 다음과 같았다. 1. 2차원 해석 결과는 3차원 해석 결과 보다 약 10% 정도 크게 해석되었다. 2. 연약지반의 치환율이 5%이하 일 때 침하량은 급격히 증가하였다. 3. 심층혼합공법으로 연약지반 개량시 횡방향 간격 3m, 종방향 간격 6m, 그리고 8m의 심도로 개량하는것이 가장 경제적인 것으로 나타났다. 4. 심층혼합공법으로 연약지반 개량시 2차원 유한요소 해석보다 3차원 유한요소 해석으로 결정되어야 한다.

  • PDF

임진강 하류 감조구간에서 홍수위 산정 재고 (Reconsideration of evaluating design flood level at Imjin River estuary)

  • 박창근;백경오
    • 한국수자원학회논문집
    • /
    • 제50권9호
    • /
    • pp.617-625
    • /
    • 2017
  • 본 연구에서는 조석의 영향을 주기적으로 받는 임진강 하류부의 계획홍수위를 보다 합리적으로 산정하는 방안을 검토해 보았다. 우선 감조하천의 특성을 감안할 수 있는 부정류모의를 수행하여 홍수위의 변동을 살펴보았고, 수위 계산에 민감한 매개변수인 조도계수를 해당지역의 특성에 맞게 현실화하여 홍수위 변화를 분석하였다. 그 결과를 2011년 임진강하천기본계획보고서에서 고시한 임진강 하구 계획홍수위와 비교하고, 감조구간에서 홍수위 산정시 유의해야 할 점들을 정리하였다. 참고로 2011년에 고시된 계획홍수위는 대규모 하상 준설 단면을 입력자료로 하여 부등류모의를 통해 산정된 바 있다. 본 연구의 결과, 임진강 하구의 경우 홍수위 산정에 있어서 조도계수를 한강하구와 동일한 값으로 할당하고, 하구 조위를 감안할 수 있는 부정류 모의를 수행하면 하상 준설을 하지 않더라도 홍수위가 제방 여유고를 만족함을 알 수 있었다.

고차확률가중모멘트법에 의한 지역화빈도분석과 GIS기법에 의한 설계강우량 추정(I) -동질성의 지역구분 방법을 중심으로- (Estimation of Design Rainfall by the Regional Frequency Analysis using Higher Probability Weighted Moments and GIS Techniques(I))

  • 이순혁;박종화;류경식;지호근;전택기;신용희
    • 한국농공학회지
    • /
    • 제43권4호
    • /
    • pp.57-68
    • /
    • 2001
  • It is matter of common knowledge to give impetus to the water resources development to cope with increasing demand and supply for the water utilization project including agricultural living and industrial water owing to the economic and civilization development in recent years. Regional design rainfall is necessary or the design of the dam reservoir levee and drainage facilities for the development of various kinds of essential waters including agricultural water. For the estimation of the regional design rainfall classification of the climatologically an geographically homogeneous regions should be preceded preferentially This study was mainly conducted to derive the optimal regionalization of the precipitation data which can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Wulreung islands in Korea. A total of 65 rain gauges were used to regional analysis of precipitation. Annual maximum series for the consecutive durations of 1, 3, 6, 12, 24, 36, 48 and 72hr were used for various statistical analysis. Both K-means clustering and mean annual precipitation methods are used to identify homogeneous regions all over the regions. Nine and five homogeneous regions for the precipitation were classified by the K-means clustering and mean annual methods, respectively. Finally, Five homogeneous regions were established by the trial and error method with homogeneity test using statistics of $\chi$$^2$ distribution.

  • PDF

계단형 보 하류 흐름특성과 Wave Type Flow에 관한 실험연구 (Experimental Study on Flow Characteristic and Wave Type Flow at Downstream of Stepped Weir)

  • 강준구;여홍구;이금찬;최남정
    • 한국수자원학회논문집
    • /
    • 제43권1호
    • /
    • pp.41-49
    • /
    • 2010
  • 본 연구의 계단형 보는 자연형 횡단 구조물의 한 형태로 제안되고 있다. 계단형 보 하류에서의 흐름은 기존 보(Round Crest Weir)에서 발생하는 도수와 달리 WTF(Wave Type Flow)라는 독특한 흐름이 발생한다. WTF는 계단형 보 하류에서 단차로 인해 발생되는 재순환영역(recirculation area)이 일정조건에서 발달하여 수면을 상승시키는 현상이다. WTF 조건에서의 파고는 하류수위(tailwater level) 보다 높아지고 WTF 구간에서의 최대유속발생이 수면에 가까운 곳에서 발생한다. 이와 같은 결과는 WTF 현상이 설계 시 접합부에 영향을 줄 수 있는 중요 인자임을 나타내는 것이다. 본 연구는 수리실험을 통해 WTF이 발생되는 수리조건과 WTF의 규모를 파악하였고 계단형 하류흐름조건에 따른 유속분포를 분석하였다. 본 연구의 결과는 계단형 보 설계 시 고려되지 못한 부분으로서 차후에 계단형 구조물 또는 계단식 변형 구조물 설계 시 주요 자료로 활용 될 것이다.