• Journal of the Optical Society of Korea
• /
• 제6권2호
• /
• pp.21-26
• /
• 2002

Interferometric metrology with a null CGH(computer-generated hologram) is presented for measuring highly aspheric surfaces used in a large screen projection television system with high accuracy. The cubic spline surface model which works in a single-pass configuration with a refractive index of object space 0 is used for designing a null CGH. A hybrid null corrector with plano-concave lens in front of a CGH is presented to make the CGH easier to fabricate. Experimental results are presented to demonstrate the validity of the proposed technique.

• 한국빅데이터학회지
• /
• 제2권1호
• /
• pp.41-48
• /
• 2017

최근 추천 시스템의 인기와 함께 추천 시스템의 알고리즘의 성능에 대한 평가가 중요해 졌다. 본 연구는 영화 데이터에서 다양한 알고리즘 중 어떤 알고리즘의 효과적인지 판단하기 위하여 모델링과 RMSE를 통한 모델 검증을 하였다. 본 연구의 데이터는 무비렌즈의 평가 데이터 10만건을 활용하여 피어슨 상관계수를 활용한 사용자 기반 협업 필터링, 코사인 상관계수를 활용한 아이템 기반 협업 필터링 그리고 특이 값분해를 활용한 아이템 기반 협업 필터링 모델을 만들었다. 세가지 추천 모델로 평점을 예측한 결과 사용자 기반 협업 필터링보다 아이템 기반 협업 필터링의 정확도가 월등히 높은 것을 확인했고, 행렬 분해를 사용했을 때 더 정확한 추천을 할 수 있었다.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.1997-2003
• /
• 2003

Recently, there have been many researches and developments in optical disc drive by high density of track and high access speed. Therefore, the optical pick-up should guarantee highly accurate dynamic characteristics for the wide bandwidth in order to cope with this trend. These demands for optical pick-up actuator can be solved by improvements of lens-holder through the following methods. The first way is the analysis of the sensitivity matrix of design variables for vibration modes after appropriate design parameters are selected like shapes and local dimensions of a lens-holder. The second way is the optimization of design variables by calculating sequential linear programming after the problem of extending bandwidth are converted to problem of minimizing adequate objective function. In the result, modified FE model is obtained through several iterations by finite difference scheme(FDS). While results of the first way show better convergence of the target frequency, the second result shows better reduction of mass increase.

• Asia pacific journal of information systems
• /
• 제26권2호
• /
• pp.268-289
• /
• 2016

While most of studies have paid attention to the initial adoption of a specific application, research on applications has not focused on an individual's update decision process. This study draws upon both dual information processing and status quo bias perspectives as a comprehensive theoretical lens to explain why individuals do not update their applications. This study assumes that individuals' inertia could be the main reason for their reluctance to update the applications. Based on a survey of 186 smartphone users, this study demonstrated that both habit as an affective trigger of system 1 thinking and sunk cost as a cognitive trigger of system 2 thinking promoted the two types of inertia (i.e., affective and cognitive based inertia) in individuals, which have a negative effect on their willingness to update their applications. By grounding the research model in a theoretical view, such as dual information processing and status quo bias, this study provides a unique theoretical lens from which to view individuals' behaviors, thereby gaining a better understanding of their decision not to update to the current version of applications. This study also investigates the moderating effect of the types of applications on the relationships between affective/cognitive-based inertia and willingness to update. Results show that both habit and sunk cost decrease the willingness to update because they increase both affective and cognitive-based inertia. This study also found that the effects of affective/cognitive based inertia differed depending on the type of applications.

• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.113-117
• /
• 2013

This paper describes a new technology to develop the character recognition technology based on pattern recognition for non-contacting inspection optical lens slant or precision parts, and including external form state of lens or electronic parts for the performance verification, this development can achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data and standard reflex data mutually. Developed system to smallest 1 pixel unit though measuring is possible 1 pixel as $37{\mu}m{\times}37{\mu}m$ ($0.1369{\times}10-4mm^2$) the accuracy to $1.5{\times}10-4mm$ minutely measuring is possible performance verification and trust ability through an experiment prove.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.223-228
• /
• 2005

In oprical disk drives, surface defects on a disk distort tracking error signal and disturb a precision tracking control.. A conventional method against disk defect is held the tracking control signal when a defective portion is detected. However, if the defective portion is getting longer, objective lens will get away from following track. In order to keep the postion of spot from following track, the servo system must predict tracking error and control the object lens in the defective portion. A tracking control system for optical disk drives was proposed recently based on both Coprime Factorization(CF) and Zero Phase Erro. Tracking(ZPET) control. The system was proposed for overcome the limit of previously tracking error. But there were no research about the method against the defective portion. This paper proposes a new and simple ZPET construct. as a new method against the defective portion. From experimental results, we have proved that proposed method improves the performance against the defective portion, decreases the uncertainty of a model, and requires less memory than the previously proposed method.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.315-321
• /
• 2001

Aerodynamic lenses are widely used in generating particle beams of high density and small diameter, but analytical or modeling studies are limited only in the free molecular regime. In this study, it is shown that generating particle beam is also possible in atmospheric pressure range, and the mechanism of generating particle beam using an orifice is analysed into three different parts : fluid dynamic contraction, diffusional defocusing, and inertial focusing. In laminar flow conditions, the diffusional defocusing effect can be neglected, and the effects of inertial focusing can be expressed in terms of the orifice size and Stokes number. Numerical experiments are done for two different orifices, d/D=1/5 and 1/10 and particle diameter d(sub)p=1-10 ㎛. The results for two different orifices can be made into a single curve when a modified Stokes number is used. The inertial focusing effect diminishes when the modified Stokes number becomes smaller than 10(sup)-2.

• 천문학회보
• /
• 제43권2호
• /
• pp.40.4-41
• /
• 2018

The current 'standard model' of cosmology provides a minimal theoretical framework that can explain the gaussian, nearly scale-invariant density perturbations observed in the CMB to the late time clustering of galaxies. However accepting this framework, requires that we include within our cosmic inventory a vacuum energy that is ~122 orders of magnitude lower than Quantum Mechanical predictions, or alternatively a new scalar field (dark energy) that has negative pressure. An alternative approach to adding extra components to the Universe would be to modify the equations of Gravity. Although GR is supported by many current observations there are still alternative models that can be considered. Recently there have been many works attempting to test for modified gravity using the large scale clustering of galaxies, ISW, cluster abundance, RSD, 21cm observations, and weak lensing. In this work, we compare various modified gravity models using cosmic shear data from the Deep Lens Survey as well as data from CMB, SNe Ia, and BAO. We use the Bayesian Evidence to quantify the comparison robustly, which naturally penalizes complex models with weak data support. In this talk we present our methodology and preliminary results that show f(R) gravity is mildly disfavoured by the data.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.44-49
• /
• 2007

Recent manufacturing system requires development on new production technology to enable prompt manufacturing of diverse products. Most of the researchers have been working on micro-factory. Especially, focus on manufacturing of micro parts. Present manufacturing system consumes excessive resources in the form of energy and space to manufacture the micro parts. In this study, the micro lens module assembly system was modeled, analyzed with MST(Micro System Technology) Application Module and simulated through UML Language (Unified Modeling Language) with object-oriented logical model analysis method. Digital model of micro-factory was modeled, to execute the new paradigm of digitalization on products, resources and processes of micro-factory.

• Journal of Information Technology Applications and Management
• /
• 제17권3호
• /
• pp.191-211
• /
• 2010

Existing models of knowledge processing do not feature a systemic meaning of knowledge management and ignore the role of leadership and social energy in the knowledge processing system (KPS). This conceptual paper introduces the Leadership Invigorating Flows of Energies, (LIFE) Model as an attempt to remedy that situation and provide a more useful description of the KPS. The LIFE Model highlights the role of emergent leadership and flows of social energies as forces encouraging knowledge creation and dynamic diffusion within an organization through the Knowledge Processing Cycle in eight activities interacting with its social knowledge base in a self-organizing system.