• Title/Summary/Keyword: Length to width ratio

검색결과 853건 처리시간 0.024초

Width-to-length ratio comparison between ameloblastomas and odontogenic keratocysts in the body of the mandible: A preliminary study

  • Omami, Galal;Adel, Mohamed
    • Imaging Science in Dentistry
    • /
    • 제50권4호
    • /
    • pp.319-322
    • /
    • 2020
  • Purpose: The purpose of this study was to investigate the utility of the width-to-length ratio for the differentiation of ameloblastomas and odontogenic keratocysts in the body of the mandible. Materials and Methods: This study retrospectively reviewed 9 patients with ameloblastomas and 9 patients with odontogenic keratocysts using cone-beam computed tomography. The width-to-length ratio was determined by measuring the ratio between the greatest buccolingual dimension and the greatest perpendicular anteroposterior dimension of the lesion on the axial view. One-way analysis of variance was used to examine the difference in the width-to-length ratio between the 2 types of lesions. Statistical significance was tested at P<0.05. Results: Ameloblastomas showed a mean width-to-length ratio of 0.64, whereas odontogenic keratocysts showed a mean width-to-length ratio of 0.41. The cut-off value with which the 2 types of lesions were differentiated was 0.5. The width-to-length ratios of ameloblastomas were significantly higher than those of odontogenic keratocysts (P<0.05). Conclusion: The width-to-length ratio might be used to differentiate between ameloblastomas and odontogenic keratocysts.

한국 재래 고양이 신장크기에 대한 방사선적 평가 (Radiographic Estimation of Renal Dimension in Korean Domestic Cats)

  • 이혜선;서태원;조상욱;현창백;김종택;오기석;김방실;손창호;박인철
    • 한국임상수의학회지
    • /
    • 제23권4권
    • /
    • pp.437-441
    • /
    • 2006
  • Renal length, width, and ratio to the length of the second lumbar vertebrae body were assessed on survey radiographs and excretory urograms in 50 Korean domestic cats. Renal dimensions on plain radiographs were: right kidney length $4.31{\pm}0.50cm\;(mean{\pm}SD)$, right kidney width $3.10{\pm}0.36cm$, left kidney length $4.17{\pm}0.48cm$, left kidney width $3.03{\pm}0.34cm$, right kidney length ratio $2.37{\pm}0.21$, right kidney width ratio $1.71{\pm}0.15$, left kidney length ratio $2.30{\pm}0.20$, and left kidney width ratio $1.38{\pm}0.08$, respectively. Renal dimensions on excretory urograms were: right kidney length $4.56{\pm}0.53cm$, right kidney width $3.29{\pm}0.37cm$, left kidney length $4.43{\pm}0.47cm$, left kidney width $3.22{\pm}0.33cm$, right kidney length ratio $2.51{\pm}0.22$, right kidney width ratio $1.81{\pm}0.17$, left kidney length ratio $2.45{\pm}0.20$, and left kidney width ratio $1.78{\pm}0.16$, respectively. There were significant difference in renal size and renal dimension ratio measured from contrast studies compared with survey radiographs (P<0.05). There were also significant difference in renal size and renal length ratio between right and left kidneys (p<0.05).

한국재래산양 머리뼈에 대한 두개계측학적 연구 (Craniometric studies on the skull of Korean native goat)

  • 이성준;이흥식
    • 대한수의학회지
    • /
    • 제34권4호
    • /
    • pp.705-714
    • /
    • 1994
  • This study was carried out to identify the craniometric characteristics of the skull of Korean native goat. The results were as follows; The skull index, cranial index, facial index, right orbital index and left orbital index were $55.86{\pm}2.14$, $59.97{\pm}3.68$, $107.03{\pm}5.71$, $92.22{\pm}4.54$and $90.47{\pm}5.48$, respectively. The ratio of facial length to cranial length was 1:1.15 and the ratio of length of cranial base to palatal length was 1:1.35. The skull length was more correlated to the facial length than to the cranial length(p<0.01). The skull width was more correlated to the width between foramina supraorbitales than to the width between foramina infraorbitales. It also showed negative correlation to the medial width between bases of processus cornualis but positive correlation to the lateral width between bases of processus cornualis(p<0.01). The width between tips of both horns showed high positive correlation to the medial width between processus cornualis, but negative correlation to the lateral width(p<0.01).

  • PDF

두 집단의 재조합 근친교잡 계통 (RIL) 콩에서 엽장과 엽폭 및 장폭비와 관련된 양적헝질 유전자좌 분석 (Identification of Quantitative Trait Loci Associated with Leaf Length. Width and Length/width Ratio in Two Recombinant Inbred Lines of Soybean (Glycine max L.))

  • Kim, Hyeun-Kyeung;Kang, Sung-Taeg
    • 생명과학회지
    • /
    • 제14권5호
    • /
    • pp.821-828
    • /
    • 2004
  • 엽면적과 엽장 및 엽폭은 식물의 광합성 효율과 관련이 있다. 단위 엽면적당 광합성율을 증가는 콩에서 종실 수량을 증가시킨다 따라서 본 연구는 큰올콩과 신팔달콩 및 익산10호를 각각 교배하여 얻은 두 집단이 잎의 엽장과 엽폭 및 장폭비를 확인할 수 있는 SSR 마커를 선발하기 위하여 실시하였다. 잎의 장폭비는 두 집단에서 엽폭과 유의적인 부의 상관을 보였다. 엽장은 큰올콩/신팔달롱 조합에서 연관군 DIb+W와 L에서 두개의 작은 양적 형 질 유전자좌 (QTL)를 탐색하였으며, 큰올콩/익산10호 조합에서는 연관군 1와 L에서 두개 의 양적 형 질 유전자좌가 관련하였다. 엽폭은 큰올콩/신팔달콩 조합에서 2개, 큰올콩/익산10호 조합에서 3개의 양적형질 유전자좌가 관련하였으며 이들은 각각 전체 형질 변이의 13% 및 18.04%를 설명할 수 있었다. 장폭비는 큰올콩/신팔달콩 조합에서 연관군 I와 L에서 2개, 큰올콩/익산10호 조합에서 연관군 Cl과 E 및 L에서 3개의 양적형질 유전자좌가 관련하였다.

Back-to-Back 보강토옹벽의 옹벽폭비에 따른 최적 보강길이비 산정을 위한 수치해석적 연구 (Numerical Analysis for Optimal Reinforcement Length Ratio According to Width-to-Height Ratio of Back-to-Back MSE)

  • 박춘식;김동광
    • 한국지반공학회논문집
    • /
    • 제36권12호
    • /
    • pp.69-76
    • /
    • 2020
  • Back-to-Back 보강토옹벽은 좁은 구간에 양립하는 옹벽의 형식을 가지기 때문에 벽체간의 이격거리에 따라 보강재가 겹치게 되어 보강재 간의 상호작용에 의한 응력 변화와 일체화된 상태에서 전체가 거동하는 문제 등으로 설계단계에서 신중한 접근이 필요하나 현재 국내에 정형화된 설계기준이나 지침이 전무한 상태이다. 본 연구는 이러한 Back-to-Back 보강토옹벽에 대해 옹벽폭 대 높이비(옹벽폭비, Wb/H)에 따른 최적 보강길이비에 대해 고찰하였다. 옹벽폭비는 FHWA 설계기준의 Case II에 해당하는 1.1H, 1.4H, 1.7H, 2.0H, 높이는 일반적으로 가장 많이 적용되고 있는 3.0m, 5.0m, 7.0m, 10.0m를 대상으로 하였으며, 각 조건에서 수치해석을 통해 FHWA 설계기준의 적정성과 옹벽의 높이 및 옹벽폭비에 따른 최적 보강길이비를 제안하였다.

Detection of Main-effect QTLs, Epistatic QTLs and QE Interactions for Grain Appearance of Brown Rice(Oryza sativa L.)

  • Qin, Yang;Kim, Suk-Man;Sohn, Jae-Keun
    • Journal of Crop Science and Biotechnology
    • /
    • 제11권2호
    • /
    • pp.151-156
    • /
    • 2008
  • The objective of this study is to identify main-effect QTLs, epistatic QTLs, and the interactions between QTL and the environment associated with grain appearances of brown rice. A genetic linkage map was created with 172 DNA markers spanning 12 rice chromosomes based on 120 DH lines, which derived from a cross between 'Samgang'(Tongil) and 'Nagdong'(Japonica). One thousandgrain weight, length, width, length-to-width ratio, and thickness were evaluated regarding the DH population. Twenty independent QTLs and fourteen epistatic QTLs were identified in using CIM by two programs, known as WinQTLcart2.5 and QTLMAPPER. The QTLs of qgw9.1 in an interval of RM434-RM242 on chromosome 9 and qgw11.1 at a peak marker of RM287 on chromosome 11 for one thousand-grain weight, qgwi2.2 for grain width at a peak marker of RM450, qlw2.1 for length-to-width ratio flanked by RM492 and RM324, and qgt2.1 for thickness flanked by 2009 and RM492 on chromosome 2 were detected over two years, which can be considered as stable QTLs. The epistatic effect might be an important component for genetic basis of one thousand-grain weight and width. The main-effect QTLs of grain width and length to width ratio were easily influenced by environments.

  • PDF

한복바지 구성의 제도법에 대한 고찰 (A Study on the Drafting Method of Korean Men's Traditional Trousers)

  • 정욱임
    • 대한가정학회지
    • /
    • 제35권4호
    • /
    • pp.95-110
    • /
    • 1997
  • According to the design method for constructing the crotch angle of traditional Korean men's trousers there are differences in from after its completion. Since there is no standardization of visual & aesthetic pattern for the construction method which is stablished by the calculation formular of waist girth hip girth pantleg end and upper outer leg length it is difficult to be used for educational use or for teaching materials. Therefore the purpose of this project according to five models in proportion to the physical standard of Korea in ages from 24 to 29 years old is to establish a design criterion and the standardization of construction methods by introduction the pant construction method of the crotch angle by converting the sitting posture length to seaming crotch center point both knees width in the Korean way of sitting. The production method for the pattern design is as follow: (1) The waist girth formular is {{{{ { w} over {4 } }}}}+{{{{ {w} over {10 } }}}}(2) The hip girth formular is {{{{ {H } over { 4} }}}}+{{{{ {H } over {5 } }}}}(3) The pantleg end formular is {{{{ {H } over {4 } }}}}(4) A crotch angle is fixed at 70 degress.(5) The ratio of outer leg length to leg width is 5:8 (6) The component ratio of the upper outer leg length to the pant length in 5:8(7) The ratio of the division point of front / right inner leg length and left inner leg width to upper outer leg length is 5 : 8

  • PDF

사각 기판의 길이진동을 이용하는 초소형 공진자에 있어서 사각 기판의 세변의 길이비가 공진특성에 미치는 영향 (Effects of Three Side Ratios of the Rectangular Substrate on the Resonant Characteristics of the Ultra-small Size Resonator Using Its Length Extensional Vibration)

  • 이개명;한성훈;김병효
    • 한국전기전자재료학회논문지
    • /
    • 제13권11호
    • /
    • pp.932-937
    • /
    • 2000
  • The length extensional vibration mode of a piezoelectric ceramic substrate is used in fabricating the ultra-small size resonators and filters. In general, the three side ratios of the rectangular substrate affect the resonant characteristics of the resonator using its length extensional vibration. In this paper, their relationships are studied. We know that changing the ratio of its length to its width makes possible to change the resonant frequency of the width vibration without degrading the length extensional vibration. And frequency constant for length extensional vibration becomes slightly small as the substrate thickness becomes thin, but it does not change as its length changes. Electro-mechanical coupling factor for length extensional vibration, k$\_$31/ does not change as its length changes within length/width$\geq$4, but it becomes small as its width increases.

  • PDF

바지락패곡의 형태변이와 바지락의 장형, 단형의 형태적 특성에 관하여 (On the Morphological Variations and Special Feature of the Elongated and the Stunted Forms in the Short Necked Clam, Tapes japonica)

  • 최상
    • 한국동물학회지
    • /
    • 제8권1호
    • /
    • pp.1-7
    • /
    • 1965
  • The short-necked clam is distributed widely in Korean tidal flats and it is a much an important bivalve quantitatively as to control the production of the tidal flat. The shell of this clam tends to show remarkable morphological variations depending on the habitat. Under a seemingly favorable condition for the growth , the color pattern of shell of the clam is clear and obvious and having less weight and elongated shape, the ratios of shell length to both height and width are small . On the contrary , when the environment appears to be an unfavorable one, the shell is found to be heavy and stunted with smudgy color pattern. If this correlation between could be a basis for the judgement in suitability of growth environment for the clam. In the Ikawazu Bay, Japan, it is revealed that the elongated shell is produced from the coast outside of the Bay (1) , the stunted from the esturay (2) and the intermediate from the floodgate area (3) and the middle of the Bay (4). Followings are the results obtained from the morphological investigation of the claim in this Bay. 1. Relationship between the shell length and the largest shell rib length is linear and between the shell length and the shell width is also linear but with a critical point at the shell length of 17-20 mm. The ratio between the width and the largest rib length at a given shell length increases with the order of 1, 3, 4, and 2. 2. A gradual decreases of the ratio of the shell length to the largest rib length is observed when the former is less than 17-18 mm, and this ratio increases with the shell of longer. Also there is a different range of this ratio in each different location ; the greatest range in 2, the smallest in 1 and 4 being in between. 3. A similar biometric finding is apparent with the ratio between the length and width of the shell and the order in value is 2, 4, 1 and 3. 4. The ratios between the length and the largest rib length of elongated and stunted shell are 0.84-0.86 and 0.89-0.92, respectively , and those between the length and width are 0.40-0.51 and 0.49-0.58, respectively. 5. Generally , the elongated short necked clam shells are products of the tidal flat of good circulation of sea water with high salinity and smaller fluctuations of salinity and temperature within a day. The stunted shells are produced for tidal flats of opposite of above conditions.

  • PDF

Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population

  • Oh, Yeon-Ah;Yang, Hong-So;Park, Sang-Won;Lim, Hyun-Pil;Yun, Kwi-Dug;Park, Chan
    • The Journal of Advanced Prosthodontics
    • /
    • 제9권2호
    • /
    • pp.93-98
    • /
    • 2017
  • PURPOSE. The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. MATERIALS AND METHODS. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. RESULTS. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. CONCLUSION. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.