• Journal of the Korean Home Economics Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 1979

The functional problems of the basic pattern of clothing are a matter of the first importance to clothing construction. Therefore, the ergonomic analysis of the expansion and contraction of the upper body surface, due to motion, has become required. thus in order to obtain the measurements and rate of expansion and contraction of the upper body surface following from its motions, the development figure of " Shell" and somatometry were employed. The results obtained through the investigation can be summarized as follows : 1) According to the developmental figures of "Shell" the latitudes centering around the shoulder line present contractive tendencies by arm movement. The longitudes around the center back waist length are expansive tendencies when bent forward. In the case of a 15$^{\circ}$ lean backward posture, the longitudes around the center front waist length are expansive tendencies. 2) By somatometry, the region from the scapula to the axilla point the upper back with presents the greatest expansion (more than 30%). The region from scapla to arm presents the maximum rate of contraction. In considering the longitude , under the axilla waist length and the bust point waist length generally shows the greatest rate of expansion. 3) The bust point waist length and under the axilla waist length are of great importance to the basic pattern of clothing. and have expansive tendencies(6.3cm). Among the latitudes, the upper back width has the greatest tendency for expansion (7.83 cm). 4) The region which presents the greatest rate of the expansion and contraction is in the proximity of the arm. These results testify that the amount of room of the back width must be given consideration in constructing the basic pattern of clothing.pattern of clothing.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.71-71
• /
• 2017

Stable stand establishment is pre-requisite in direct rice seeding system for obtaining optimal yield of rice crop in rain-fed and waterlogged areas. Anaerobic condition on waterlogged soil causes low germination which significantly reduces crop yield. Due to low availability of tolerant genetic material for anaerobic germination, there is urgent need to evaluate rice germplasm for better germinability under anaerobic conditions. Seeds of the 185 rice accessions were evaluated for germination vigor and coleoptile length under anaerobic conditions. The variation among germplasm was tested for significance using analysis of variance and various multivariate components. Significant level of variation was observed among all accessions for germination vigor and coleoptiles length. Although highest mean values for coleoptiles length (2.1cm) and germination rate (60%) were observed in japonica accessions but maximum coleoptile length (4.68cm) and germination rate (96%) was found in indica genotype CO18. A highly significant and positive correlation was also observed between germination vigor and coleoptiles length, which signify the importance of elongated coleoptile under anaerobic conditions. The PCA analysis illustrated that 97.24% variation was accounted by PC1 while PC2 and PC3 explained 2.54% and 0.24% variation for germination vigor and coleoptile length. PCA scattered plot divided the accessions in four various groups. All AG tolerant accessions were included in group I. Likewise in the case of cluster analysis, two major clades (I and II) were formed. All accessions showing >40% germination rate were included in clade I, whereas all other accessions with <40% germination rate were grouped in clade II. Further more highly tolerant accessions (>80% germination) were grouped in sub-cluster IA.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.967-972
• /
• 2013

A MILD (Moderate and Intense Low oxygen Dilution) combustion, which is effective in the reduction of NOx, is considerably affected by the recirculation flow rate of hot exhaust gas to the combustion furnace. The present study used the MILD combustor, which has coaxial cylindrical tube. The outside tube of the MILD combustor corresponds to the exhaust gas passage and the inner side tube is the furnace passage. A numerical analysis was accomplished to elucidate the characteristics of exhaust gas entrainment toward the inner furnace with the changes of coanda nozzle geometrical parameters, nozzle passage gap length, nozzle passage length, nozzle angle and expansion length. The optimal configuration of coanda nozzle for the best entrainment flow rate was gap length, 0.5 mm, expansion angle, 4o and expansion length, 146 mm. The nozzle passage length was irrelevant to the exhaust gas entrainement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.760-768
• /
• 2007

Statement of problem. Conventional denture treatment for totally edentulous patients is associated with a variety of functional and psychosocial problems. The placement of implants in the anterior region of the maxilla and mandible and the fabrication of an implant-retained overdenture might solve these problems. Purpose. This study compared the marginal bone loss around the implant and evaluated the implant survival rate and complications in patients treated with overdentures retained by implants for 2 years. Material and methods. Patients who had received implant-retained overdentures using a Dolder bar at Samsung Medical Center from January 1999 to June 2005 and had participated in the annual recall programs for two years were selected for this study. A total of 18 patients and 56 $Br{\aa}ne-mark\;system^{(R)}$ implants were used, and their data were reviewed. Evaluations of the survival rate, bone quality, marginal bone loss, and complications were performed. The data on the Dolder bar length and clip length were measured. The change in marginal bone loss and the correlation between the marginal bone loss and bar length, clip length, or bone quality were investigated. Results. Implants placed in this study showed a 100% survival rate. The average annual bone loss was 1.12mm in the first year and 0.27mm in the second year in the maxilla, and 0.58mm in the first year and 0.22mm in the second year in the mandible. The marginal bone loss in the maxilla showed no significant association with those in the mandible. (P>.05). There was no significant difference in marginal bone loss around implants between the first and second year. (P>.05) There was no statistically significant relationship (P>.05) between the marginal bone loss and bone quality, clip length, or Dolder bar length. The Dolder bar length showed a high correlation with the clip length. (P<.05) Various complications were noted. Conclusion. These results confirmed the favorable outcome for patients treated with implant-retained overdentures.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.84-90
• /
• 2000

Biodegradation of vanous medium-chain-length polyhydroxyalkanoates (MCL-PHAs) by an extracellular depolymerase system from Pseudomonas sp. RY-1 was investigated under laboratoly conditions. The degradation rate of the polymers was determined by quantitative clem zone technique, enzyme (turbidity) assay, and respirometry assay. Although the enzyme system secreted by Pscudomor~as sp. RY-1 was capable of degrading all MCL-PHAs tested. its secretion was influenced by the availability of secondary carbon sources. The rate of enzymatic degradation of MCL-PHAs was dependent upou the monomeric composition of the polyesters and reduced as the chain lengths of the monomer m t s in the polyesters increased. MCL-PHAs containing C-even monomer units showed faster degradation rate than MCL-PHAs containing C-odd monomer units. Respiration rates of MCL-PHAs with C-even monomer uuts were also much faster than those of MCL-PHAs with C-odd monomer units. The degmdation rate of MCL-PHAs bearing unsaturated substituents was faster than that of mcl-PHAs without functional substituents, which is suggesting the correlation between the degradation rate and the crystallinity of MCL-PHAs.

• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.58-71
• /
• 2009

The purpose of this study is to examine the increments of body measurements of the teenage boys between the ages of 13 and 18 and provide a fundamental data for apparel manufacturers in order for them to make clothing that reflect the appropriate body characteristics of the teenage boys. The total of 1587 male subjects between the ages of 13 and 18, from the 5th Anthropometric survey of Korea (Size Korea) data, were used for this study. The changes in the body dimensions were analyzed with anthropometric measurements and anthropometric index mesurements. First, anthropometric measurement results show that most of the height related measurements increased in accordance with age, and that the boys between the ages of 13 and 15 experience dramatic growth. Standard deviation is the largest between the age of thirteen and fourteen which indicates that in these ages there is a wide difference in a growth rate Second, anthropometric index measurement results show that in accordance with age, bust, waist and hip depth/width rate decreased; however, waist and hip depth/width rate increased at the age of 18. In accordance with age, upper body length rate increased, whereas lower body length rate decreased. Bust circumference, armhole length, and upperarm circumference rate increased gradually, whereas waist circumference decreased.

• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.474-481
• /
• 2006

In this paper, a new type blow head was developed and pneumatic application system was evaluated. The blow head had one operating factor, inserting length of collecting plate, that was directly related to discharge rate and application pattern. To determine Proper blow head arrangement and application height, a blow head set was tested. Three-way ANOVA was conducted to investigate relationships between CV value, the discharge rate and inserting length of collecting plate. The discharge rate and inserting length of collecting plate were statistically significant at p=0.01, affecting uniformity of application pattern. The best CV value among the application tests was 23.3% when the application rate and application height was 23.5 g/sec and 80 cm respectively. The worst CV value was 63.3% in 111.4 g/sec. Therefore, it is necessary to increase number of blow head in a section of the boom in improve application uniformity.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.191-196
• /
• 2018

PURPOSE. The goal of this study was to evaluate the clinical outcome of single short implants, less than 8 mm in length, placed in the posterior area. MATERIALS AND METHODS. A total of 128 patients (75 male and 53 female, mean age: $52.6{\pm}11.2years$) with 154 implants participated. Implant marginal bone loss, and survival and success rates were measured. RESULTS. The mean follow-up period was $51.35{\pm}24.97months$. A total of 128 implants, 8 mm in length, were placed in patients who had mean marginal bone loss of 0.75 mm. These implants had a survival rate of 95.3%. Twenty-six implants, 7 mm in length, were placed in areas with a mean marginal bone loss of 0.78 mm and had a survival rate of 96.2%. Both marginal bone loss and survival rate were not statistically different among the groups. In the maxilla, 34 implants showed a mean marginal bone loss of 0.77 mm and a survival rate of 97.1%. In the mandible, 120 implants showed a mean marginal bone loss of 0.75 mm and a survival rate of 95.0%. The average marginal bone loss around all implants was $0.76{\pm}0.27mm$ at the last follow-up review after functional loading. The survival rate was 95.6% and success rate was 93.5%. CONCLUSION. In our study, single short implants less than 8 mm in length in the posterior areas had favorable clinical outcomes.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.413-420
• /
• 2020

We analyzed the growth characteristics of each cell line and acclimating substrate of Larix kaempferi plantlets regenerated from somatic embryos, with the goal of increasing the survival rate during the acclimation phase. Somatic embryos from three embryogenic cell lines (L14-66, L16-18, and L17-B4) were used, and the acclimating substrates were commercial soils for Larix species (Larix-Soil) and horticultural corps (Hort-Soil), Elle-pot, and Peat-plug. The average initial shoot and root length was shortest in L14-66 and longest in L17-B4. The average survival rate by cell line was highest (87.0%) in L17-B4 and lowest (64.3%) for L14-66. Survival rates by substrate were highest in Elle-pot (88.5%) and Peat-plug (88.9%). The initial shoot length of the L14-66 plantlets was highly correlated with survival rates in the Larix-Soil (r = 0.852), Hort-Soil (r = 0.692), and Elle-pot (r = 0.867) substrates, but not in Peat-plug with high total nitrogen content. The initial shoot length of the L17-B4 plantlets was not correlated with the survival rate in any of the substrates. The initial root length of the L14-66 plantlets was highly related to survival rates in the Larix-Soil (r = 0.986), Elle-pot (r = 0.846), and Peat-plug (r = 0.802) substrates, and the survival rate of the plantlets was higher as the initial root length was longer. The initial root length of the L17-B4 plantlets was related to survival rate only in the Larix-Soil (r = 0.896) and Elle-pot (r = 0.696) substrates. In conclusion, to increase the survival rate of plantlets, root length should be considered over shoot length, and it is recommended to use substrates with high nitrogen content, such as Peat-plug, or to add fertilizer, during the acclimating process. In addition, in order to increase the survival rate, lines with high initial growth should be developed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1139-1145
• /
• 2011

An automated anastomotic ring-pin system consisting of both the anastomotic ring-pin system and the coupler device has eliminated the drawbacks of the suture method. High density polyethylene (HDPE), a material with outstanding biocompatibility and injection molding capability, was used in the ring. SUS316 stainless steel, Ti-6Al-4Nb, Ti-6Al-4V, and unalloyed titanium were used in FEM simulations of the micropin. The authors categorized the microvascular anastomotic ring micropins into short neck (SN) and long neck (LN) groups in order to evaluate the effect of the micropin's fillet radius and neck length on the von Mises stress. The micropins were further divided into those with and without fillet. On the basis of the fillet radius rate (FRR), which represents the rate of change in the von Mises stress with respect to the availability and shape of the fillet, and the neck length rate (NLR), which represents the rate of change in the von Mises stress with respect to changes in the length of the neck within the fillet shape, it can be concluded that the SN-3 neck design is the most stable.