• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.185-193
• /
• 2018

Purpose: The purpose of this study was to analyze the performance factors of a rotary impact-type thresher to develop a sesame and perilla thresher, specifically to analyze the cut length of the stems and the threshing rates based on the relationship between the blade velocity and feeding speed. Methods: The materials were dried within a range of 12.3-13.0% to test the impact cut by bending. The cut lengths of the perilla and sesame stems were categorized in 6 ranges (~7.0, 7.1-10.0, 10.1-13.0, 13.1-16.0, 16.1-20.0, 20.1- (cm)). For testing the cut length and threshing rate, the upward-rotating blade velocity was varied as 11.0 m/s, 13.5 m/s, and 22.3 m/s. Feeding speeds were changed from 0.1 m/s to 2.2 m/s by the inverter connected to the feed motor. The feed rate and threshing rates without cover-casing were evaluated with the factors of thresher testing. Results: The mean cut length of the stem decreased as the blade velocity increased and/or the feeding speed decreased. As the feed rate increased up to 17.5 g/s, the cut length distributions showed no significant difference. The threshing rate was 98.9% for sesame, and flexible according to the blade velocity and feeding speed of the perilla. Conclusion: Feeding material too fast could produce longer cut stem segments, therefore, a feeding speed less than 2.2 m/s is recommended. A blade velocity of 13.5 m/s is preferable for both sesame and perilla with regard to cut length and threshing rate.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.472-483
• /
• 2009

The purpose of this study is to analyse the effects of knit samples' mechanical properties on changes of skirt length of knit flared skirt, and to compare it to the knitting method of a seamless knitted flare skirt. So, I compared the appearance and 3-dimensional shape of a seamless knitted flare skirt with those of a fully cut knit flared skirt. For this study, 18 kinds of cut and sew or seamless knitted test garment were made. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, correlation analysis, and regression analysis. The results are as follows: The result of the evaluation of knit samples' mechanical properties by the KES-FB system showed that elongation decreased as gauge increased and course direction was greatest among grain directions. The length change after wearing the knitted flare skirts appeared wholly equal to the seamless knitted, compared with the cut and sew. The change was biggest at $180^{\circ}$, 7G of the cut and sew. In grain direction, bias cut showed more than 1.2cm of length change. As the weight and thickness increased, the length changes become larger. The regression analysis indicated that the greatest contributive variables on the length changes were elongation, weight, and thickness.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.2
• /
• pp.201-206
• /
• 2005

In this work, we studied the effects of the moisture contents of cut tobacco on loose end of cigarettes. The loose end of the cigarette groups decreased with the increase of moisture contents of the cut tobacco and especially the loose end of A and C groups decreased to $31\%\;and\;52\%$ with the increase of $1\%$ moisture contents. $A-13.5\%\;and\;B-14.0\%\;and\; C-14.0\%$ moisture samples showed the increase of the weight ratio of cut tobacco over 1.4mm cut length but the decrease under 1.4mm cut length. We concluded that the main reasons were regarded to reduction of small fragment tobaccos caused by increase of moisture contents and exception of air-suction transport of tobaccos to cigarette making machine. In spite of the moisture increase of cut tobaccos under fixed EPD(encapsulated pressure drop), the hardness of Band C sample groups were maintained constantly except A group. This result means that under fixed EPD, the weight of cut tobacco in cigarette rods increases to compensate the reduction of pressure drop by moisture increase of cut tobaccos.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.186-194
• /
• 1997

This paper describes new methods to minimize the cutting time in zigzag milling operation of two dimensional polygonal surfaces. Previous works have been focused on mainly experimental approaches by considering some machining parameters such as, spindle speed, depth of cut, cutter traverse rate, cutter diameter, number of teeth, tool wear, life of tool, and so on. However, in this study, we considered two geometrical factors one by one in order to see the effect separately, which are the length of cut and the number of cutter traverse. In an N-sided concave or convex polygon, an algorithm has been developed which minimize the total length of cut. Also, a heuristic approach was used to minimize the number of cutter traverse.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.1
• /
• pp.23-30
• /
• 2006

In order to improve the final product quality, tobacco industry has gradually decreased the size and number of steams in the cigarette. Especially, steams bigger than $3{\times}3$ mm($length{\times}thickness$) and $2{\times}10$ mm($width{\times}length$) are not acceptable in the process as objectionable stems. A total number of 12 samples where the $length{\times}tickness$ samples were prepared by decreasing the present sample ($3{\times}3$ mm) with 1 mm up to $1{\times}1$ mm, and the $width{\times}length$ samples were prepared by decreasing the present sample ($2{\times}10$ mm) with 2 mm up to $2{\times}6$ mm for the stems in leaf and stems in expanded cut-tobacco were prepared to apply a fire ball drop test using stems. In addition, cigarettes were produced for these stems in order to analyze the forced fire ball drop including the burning, encapsulation and unencapsulation pressure drop and a single or unspecified direction combustion. Based on the results of the test, it was evident that the fire ball drop in the stems in expanded cut-tobacco presented a lower level than that of the stems in leaf. Also, the stems in expanded cut-tobacco presented a larger swelling and higher burning for a single direction than that of the stem in leaf. In addition, it was considered that the management criteria for objectionable stems should be changed as $3{\times}3$ mm and $2{\times}8$ mm for the $length{\times}thickness$ and $width{\times}length$ sample, respectively, in both steams in leaf and expanded cut-tobacco.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.690-692
• /
• 2003

In this paper, we have investigated characteristics of radio frequency for double gate MOSFET with 50nm main gate in according to variation of side gate length. We could know the increasement of cut-off frequency as the side gate length is lower. As a result, we could know the most optimum performance characteristics when side gate length was 70nm. In this time, the DG MOSFET of side gate with 70nm has very high cut-off frequency like 41.4GHz.

• Journal of the Korea Furniture Society
• /
• v.27 no.3
• /
• pp.165-174
• /
• 2016

To modularize the joints of Hanok, the bending strengths of butterfly joints between pre-cut and manual member were compared. Structural size joints were manufactured and the length, width and thickness of each tenon were produced with different sizes. The ultimate load of pre-cut members was 2 times higher than that of manual members. Degree of anchorage for the joints on pre-cut member was also superior to that of manual member. By the F-test results, a great influence between ultimate load and sizes of tenon was found. In result of multiple regression analysis, the length and thickness of tenon were showed proportion relationships with the ultimate load, but the width of tenon was showed inverse proportion with the ultimate load. The results of this study can be used to identify the relationships among the major influence factors. Futhermore, it might be used as basic data for modularization the joints of Hanok.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.479-484
• /
• 2018

This study is an attempt to analyze the changes and morphological analysis of the one length hair style of women in the Imperial Japanese colonial period, and the purpose of this study is to analyze the components of hair design such as shape, texture, and color based on the precedent and the book and to make possible various styles of one length hair style cut. From the results of this study, one length hair style showed the outline shape with no step height of cut length, natural hair texture and natural hair color in 1910s to 1920s. In the 1930s, the one length hair style showed a slight cut length step height and a slight discoloration using a diamond shape, a narrow wave of natural texture, hydrogen peroxide or oxygenated water. In the 1940s, one length hair style did not find any singularity to pursue brilliant beauty(美) in terms of form, texture, and color. This study may enable a deep and detailed follow up study on one length hair style, and will be a cornerstone for the development of basic data of hair beauty education and trend of new mode.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.234-241
• /
• 1999

Rails have residual stresses produced during manufacturing processes. The residual stresses play all important role on brittle fracture, fatigue strength and derailment by producing cracks in the web of rail. The web saw-cut test is a technique developed to measure the bulk longitudinal residual stress level. It is a simple mettled to estimate a stress intensity factor, $_{4}$ for a web crack by using the radii of curvature of the upper and lower portions of a cut rail. But according to this method, $_{4}$ varies along the rail length because the curvatures along tile rail length vary In this paper, tile residual stress was estimated by Finite Element Method and tile web saw-cut method. In addition tile variation of the residual stress with time was investigated.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.197-201
• /
• 2011

This study was carried out to investigate cut flower quality bulb circumference and cultivars affecting 7 different cultivars to produce high quality cut flower lilies. To determine the effects of bulb circumference on growth and cut flower quality of 7 different cultivars, Lilium oriental hybrid 'Chilli', 'Ismael', 'Medusa', 'Mother's Choice', 'Siberia', 'Sorbonne', and 'Yelloween' were tested. After cut flower quality experiment, the highest 1st flower bud length and cut flower height were 'Medusa' and 'Mother's Choice' respectively. Most plants had over $30^{\circ}$ stem bending angle except for 'Mother's Choice', and 'Ismael'. The study shows that the bigger bulb circumference has the better 1st peduncle diameter, inflorescence length, stem diameter, number of flowers, and fresh weight. Bulb circumference affects the 1st flower bud length, cut flower height and number of flowers. Stem bending angle, however, is affected by neither bulb circumference nor cultivar. In conclusion, growth, cut flower quality and vase life were affected by the bulb circumference rather than cultivar.