• 한국전문물리치료학회지
• /
• 제19권3호
• /
• pp.81-90
• /
• 2012

The aim of the current study was to assess the effectiveness of backward gait training on the treadmill in patients with spastic diplegic cerebral palsy (CP). Twelve patients with spastic diplegic CP participated in the study. An 8-week course of backward gait training was administered to the subjects for 3 days per week. Pre-intervention and post-intervention assessments of temporal-spatial gait parameters, the symmetry of the bilateral lower extremity weight bearing, and gross motor function were analyzed using motion analysis system, force plate, and Gross Motor Function Measurement (GMFM). There were significant improvements (p<.05) in the measures of both step length and right stance phase time. Joint kinematics showed increase in right hip abduction in initial contact and terminal swing, right hip external rotation and knee flexion in mid-swing, left ankle dorsiflexion in initial contact and terminal swing (p<.05). The symmetry of the bilateral lower extremity weight bearing and GMFM also significantly increased (p<.05). These findings indicate that backward gait training using a treadmill is beneficial for patients with spastic diplegic CP.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.125-132
• /
• 2007

The purpose of present paper is to investigate a fracture characteristics of the finite-width single-edge-notch(SEN) carbon fiber/epoxy reinforced plastics(CFRP) plates by using an acoustic emission(AE). Uni-directionally oriented 10 plies CFRPs specimen which had different notch length were prepared for monotonic tensile test. Matrix cracking appeared over whole testing process and fiber breaking appeared later on mainly Load distribution factor of the matrix confirmed that increased according as increases of plate width ratio. The amplitude distribution of AE signal from a specimens is an aid to the determination of the different fracture mechanism such as matrix cracking, disbonding, interfacial delamination, fiber pull-out, fiber breaking, and etc. In the result of AE amplitude distribution analysis, matrix cracking, fiber disbonding or interfacial delamination, and fiber pull-out or fiber breaking signal correspond to <65dB, <75dB, and <90dB respectively, Also, changes of the slope of cumulative AE energy represented crazing phenomena or degradation of materials.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.693-699
• /
• 2009

This paper shows mechanical properties and behaviors of macro- and micro-structures on friction stir welded specimen with 6061-T6 aluminum alloy plate. It apparently results in defect-free weld zone jointed at welding conditions like the traverse speed of 267mm/min, tool rotation speed of 2500rpm, pin inserted depth of 4.5mm and tilting angle of $2^{\circ}$ with tool dimensions such as tool pin diameter of 5mm, shoulder diameter of 15mm and pin length of 4.5mm. The tensile stress ${\sigma}_T=228MPa$ and the yield point ${\sigma}Y=141MPa$ are obtained at the condition of traverse speed of 267mm/min and tool rotation speed of 2500rpm. With the constant rotation speed, the higher traverse speed become, the higher tensile stress and yielding point become. Vickers hardness for welding zone profile were also presented.

• 대한지역사회영양학회지
• /
• 제5권2호
• /
• pp.333-342
• /
• 2000

The purpose of this study was to evaluate microbiological quality for each stage of the kimbap manufacturing process in summer and winter. Under the various controlled conditions through the simulation, the time-temperature data were collected and the microbiological quality(including total plate count, coliforms, and fecal coliform count) were evaluated. To determine the expected shelf life of Kimbap, a microbiolgical analysis according to the length of the storage time was performed. The microbiological analysis on both sanitary and unsanitary utensils was compared. The microbiological quality of the raw materials of Kimbap in summer was not at an acceptable level, but that of the heat-treated raw materials of Kimbap met the requirement according to the standards set by the Natick Research Center. The number of the microorganisms of the unsanitary utensils and the Kimbap made from unsanitary utensils was more than the acceptable criteria. Sanitary management is necessary to prohibit cross-contamination and to manufacture Kimbap safely. Results from storage times and storage temperature conditions(chilled and room-temperature storage) showed that the expected shelf-life of the Kimbap with the room-temperature storage was as less than 3 hours in summer, while it was as 7-10 hours in winter.

• 대한구순구개열학회지
• /
• 제6권1호
• /
• pp.35-42
• /
• 2003

PAP (Palatal Augmentation Prosthesis) may be given to the patients with dysphagia; especially, who cannot achieve tongue-palate contact. PAP fills hard palate area where the tongue cannot make contact and then the distance of tongue elevation is shortened. 1bat may be expected to improve swallowing and to prevent from aspiration. The purpose of this report is to show the effects of PAP in patients with dysphagia through the videofluoroscopic study. Oral-pharyngeal swallowing post PAP is analyzed in 2 cases; one is a person who had subarachnoid hemorrhage due to aneurysmal rupture, right hemiparesis, hydrocephalus and aphamia. And the other is a person who had squamous cell carcinoma on mouth floor and he had radical neck dissection and marginal mandibulectomy. In this report, the rate of aspiration, the transit time and length measurements of anatomical structure are examined in the each frame of videofluoroscopy. The results are as follows; 1) PAP decreased the aspiration in both cases. 2) In the cases of patients with PAP, the pharyngeal transit time was decreased.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.83-91
• /
• 2011

Even if smoke, fumes, mist or dust particles are removed by electrostatic precipitators (ESPs), the occurrence of ozone, which is harmful to human body, has to be severely restricted in the indoor environments of hospitals, offices, and workshops. Therefore, the two-stage ESP generating positive corona at the ionizer is typically used because it creates less ozone than the two-stage ESP generating negative corona at the ionizer. In order to predict the collection performance and the optimal design of the two-stage ESP applied to positive high-voltage, particle concentration is experimentally investigated in this paper. In addition, particle motion within the collector section is also numerically analyzed. The positive corona discharge current of the ionizer is found to be affected by the applied voltage in the collector section but less so by the particle concentration. Particle concentration shows a minimum near the high voltage electrode of the collector section. The minimum value of the collection efficiency is almost proportional to gas velocity. When the collector length decreases, the minimum value of the collection efficiency increases. Charged particles entering the collector region are linearly deflected towards the grounded plate by an electric field. From the above experimental and numerical results, two empirical equations on the concentration ratio and the collection efficiency are derived, and are in good agreement with the experimental data.

• 대한구순구개열학회지
• /
• 제6권2호
• /
• pp.59-67
• /
• 2003

A cephalometric study was performed to reveal differences between skeletal Class III malocclusion patients and cleft lip and palate patients, The material for this study consisted of 16 males (mean age 19.8, range 17-29) and 9 females(mean age 19.4, range 16-27) with cleft lip and palate, and 222 Skeletal Class III malocclusion patients(males 106, females 116), Cephalometric tracing and measurements were done by one investigator. Results were followed: 1. Cleft lip and palate group had more retrusive maxilla than the skeletal Class III malocclusion group. 2, Cleft lip and palate group had smaller effective maxillary and mandibular length than skeletal Class III malocclusion group, and the difference was more prominent in the mandible than in the maxilla. 3. Dental compensation was not observed in the upper incisors of cleft lip and palate group and in the lower incisors it was smaller than skeletal Class III group. 4, In the Gonial angle and lower anterior facial height values, there was no significant difference between cleft lip and palate and skeletal Class III malocclusion group. These results can be used in orthodontic treatment planning and orthognathic surgery for the cleft lip and palate patients.

• Plant Resources
• /
• 제6권2호
• /
• pp.153-158
• /
• 2003

Effects of shaking, medium consistency and anther density on polyhaploid production in two wheat cultivars, Pavon and Chris, were studied using a modified 85D12 medium. Pavon produced more calli in shaking and more albino plants tban Chris. However, Chris produced threefold more green plants than Pavon in non-shaking treatment. More calli and green plants were derived from non-shaking treatment than those from shaking treatment. Anthers were cultured on both liquid and semi-solid 85D12 media, using two anther densities, 48 and 96 anthers per plate. Although Pavon generally produced more calli and albino plants than Chris, Chris produced more green plants than Pavon. More green plants were derived from semi-solid medium than those from liquid medium. A factor that may affect plant regeneration from anthers is the length of time on initiation medium. Most of the calli for both genotypes were transferred during the first two time periods. Fertility, as measured by seed set, was determined for all surviving regenerated plants. About 24% of Chris and Pavon anther-derived green plants in the experiment of medium consistency and anther density produced seed.

• Animal Systematics, Evolution and Diversity
• /
• 제36권2호
• /
• pp.143-153
• /
• 2020

Six new species of two genera Dysidea and Pleraplysilla (Demospongiae: Dictyoceratida: Dysideidae) are described from Jejudo Island, Dokdo Island and Guryongpo, Korea. Among them, five new species of the genus Dysidea are compared with other reported species in fibres structure, cored detritus and fibres arrangement. Dysidea niveus n. sp. is characterized by thin collagenous plate-like fibres. Dysidea dokdoensis n. sp. is similar to D. geomunensis Kim et al., 2020 in skeletal structure, but differs in length of surface conules. Dysidea hydra n. sp. is similar to D. mureungensis Kim et al., 2020 at the surface, but differs in fibres cored with spicules. Dysidea sabulum n. sp. is similar to D. glavea Kim et al., 2020 in cored large sands in fibres, but differs in having numerous large sands cored in fibres throughout the sponge. Dysidea hirsuta n. sp. is unique, only surface fibres cored with large sands but not in choanosome. A new species of genus Pleraplysilla, P. flabellum n. sp. is compared with seven other reported species. This new species is not encrusting but has a thick flabellate shape.

• 한국해안해양공학회지
• /
• 제16권1호
• /
• pp.1-9
• /
• 2004

본 연구에서는 원전어항에서 채용하고 있는 강제 부방파제에 비해 소요재료량의 변화가 크지 않은 범위에서 전후연직판의 위치와 형식의 변화 및 수평판의 부착 유무에 따른 여러 형식의 부방파제에 의한 투과율과 반사율을 Green 함수법으로부터 계산한 결과에 기초하여, 원전어항의 강제 부방파제보다 단주기파 및 장주기파를 보다 효과적으로 제어할 수 있는 새로운 형식의 부방파제를 검토하였다. 이로부터 연직커튼판 하부에 수평판을 부착한 형태의 부방파제가 파랑제어기능이 우수한 것으로 판명되었고, 이는 원전어항 부방파제보다 파랑제어기능이 탁월하다는 것을 알 수 있었다. 또한, 본체에 부착된 전후연직판 및 수평판의 크기와 간격을 조절함으로써 적합한 투과파를 얻을 수 있다는 것도 알 수 있었다.