• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.173-180
• /
• 2007

There was a great problem about the deposition between materials of a different kind at the beginnings of the introduction of porcelains, however, thereafter the deposition efficiency was settlded to the sufficient level of all user thanks to effort to have studied by many scholars and clinical authorities. But in a clinical process, as the difference of designs has an effect on fractures of porcelains, this researcher divided them into 4 groups of A: 1 mm, B: 2 mm, C: 3 mm, and D: 4 mm, and made 40 pieces to each 10 as the test samples to consider a length axis of tooth for studies in accordance with a position of a finishing line to meet between porcelain and metal at the contact point at the adjacent side to a metal porcelain. The sample materials are those to be use at the open market and the test samples wer completed by the same manufacturing technique to that of existent metal porcelain tube. s a result of the strength test on fractures, the average value is as in the following, A: 1 mm - 8.5bar, B: 2 mm - 10.5bar, C: 3 mm - 14.3bar, and D: 4 mm - 15.0bar. In case of the metal porcelain tube, the more faraway to process parts of metal and porcelain from the contact point of adjacent side has the stronger strength of fractures, Accordingly, the research shows that it had better to keep off more than 3 to consider a ledngth axis of tooth.

• Korea Journal of Hospital Management
• /
• v.12 no.4
• /
• pp.22-44
• /
• 2007

The objective of this study is to examine relevant factors of the service level of aged care facilities. The sample used in this study consisted of 357 aged care facilities in Korea. Data were collected with self-administered questionnaire and 140 returned questionnaire were analyzed by SPSS Version 12.0. The major findings of the study are as follows: First, there was no significant mean difference in the service level by the facility characteristics, except the length of operation. Second, it was found that both administrative characteristics and employer characteristics were positively associated with the level of nursing and supportive services. Third, the study results revealed that the following three variables of employee education and training, community networks, and employer's philosophy and management principles had significant positive effects on the level of nursing services. Meanwhile, the following two variables of employee education and training, and community networks had significant positive effects on the level of supportive services. In conclusion, in order to improve their service level, the managers of aged care facilities in Korea should make efforts to provide more employee education and training, establish networks with the community stakeholders, for example, local clinics and hospitals. It is also recommended for the government to make a policy inducing more qualified private investors to enter the aged care market, as well as to strengthen the qualification of the managers of the public aged care facilities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.261-270
• /
• 1989

Bend test is one of the methods comparing the physical properties of the clasp wires. The type of bend test used in this investigation was the cantilever loading of a wrought wire. The purpose of this study was to compare the flexibility of a number of commonly used clasp wires, in according to gauge, alloy and heat treatment, under specific condition of load and deflection. Seven noble and one base metal wires were tested under three conditions as follows: (1) as received, (2) quenched (placed in an over at $700^{\circ}C$ for ten minutes and immediately quenched in water at room temperature.), (3) oven cooled (quencned as described, then placed in an oven at $450^{\circ}C$ for two minutes and uniformly slowly cooled to $250^{\circ}C$ in thirty minutes.) The basic test specimen consists of a sample 25 mm in length and 19, 18 gauge in diameter (17 gauge also in two alloys), and the wire was loaded in the form of straight cantilever beams. Force at 0.25 mm (0.01 inch) and 0.5 mm (0.02 inch) deflections for all samples were recorded. The results were as follows ; 1. Ticonium was least flexible and No. 2 was most flexible in according to gauge, alloy and heat treatment. 2. In most of precious wrought wire, the flexibility was increased, but there was no statistically significant differences between as-received and softened condition. 3. There was no statistically differences between as-received and hardened condition. 4. For each alloy, there were statistically significant differences in flexibility due to clasp diameter.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1175-1179
• /
• 2015

Background: Expression of matrix metalloproteinases (MMPs) is up-regulated in human cancers. The aim of present study was to investigate the role of MMP-9 C-1562T polymorphism and its interaction with MMP-2 C-735T polymorphism in susceptibility to breast cancer in a population from Western Iran with Kurdish ethnic background. Materials and Methods: The study sample of 205 individuals consisted of 101 breast cancer patients and 104 healthy subjects. MMP-9 C-1562T and MMP-2 C-735T variants were identified using the polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method. Results: Among 67.4% of studied patients the breast cancer developed in the third and forth decades of the life. The frequency of MMP-9 T allele was 17.3% in patients and 10.1% in controls. The presence of T allele significantly increased the risk of breast cancer by 1.87-fold [OR=1.87 (95% CI 1.05-3.33, p=0.035)]. The frequency of MMP-9 CT+TT genotype tended to be higher in those patients with a family history of cancer in first degree-relatives (36.8%) than those without a family history (28.3%, p=0.37). We observed an interaction between the MMP-9 -1562 T allele with MMP-2 -735 C allele that significantly increased the risk of breast cancer [OR=1.42 (95% CI 1.02-1.98, p=0.036)]. Conclusions: The present study demonstrated that MMP-9 C-1562T polymorphism alone and in combination with MMP-2 C-735T polymorphism increased the risk of breast cancer that might be a useful biomarker in identifying women at risk of developing breast cancer. Also, this study revealed that in most women from Western Iran breast cancer presents in third and fourth decades of life.

• Fisheries and Aquatic Sciences
• /
• v.19 no.8
• /
• pp.33.1-33.7
• /
• 2016

Antifreeze proteins (AFPs) lower the freezing point but not the melting point of aqueous solutions by inhibiting the growth of ice crystals via an adsorption-inhibition mechanism. However, the function of type IV AFP (AFP IV) is questionable, as its antifreeze activity is on the verge of detectable limits, its physiological concentration in adult fish blood is too low to function as a biological antifreeze, and its homologues are present even in fish from tropic oceans as well as freshwater. Therefore, we speculated that AFP IV may have gained antifreeze activity not by selective pressure but by chance. To test this hypothesis, we cloned, expressed, and assayed AFP IV from cultured subtropical olive flounder (Paralichthys olivaceus), which do not require antifreeze protein for survival. Among the identified expressed sequence tags of the flounder liver sample, a 5'-deleted complementary DNA (cDNA) sequence similar to the afp4 gene of the longhorn sculpin was identified, and its full-length cDNA and genome structure were examined. The deduced amino acid sequence of flounder AFP IV shared 55, 53, 52, and 49 % identity with those of Pleuragramma antarcticum, Myoxocephalus octodecemspinosus, Myoxocephalus scorpius, and Notothenia coriiceps, respectively. Furthermore, the genomic structure of this gene was conserved with those of other known AFP IVs. Notably, the recombinant AFP IV showed a weak but distinct thermal hysteresis of $0.07{\pm}0.01^{\circ}C$ at the concentration of 0.5 mg/mL, and ice crystals in an AFP IV solution grew star-shaped, which are very similar to those obtained from other polar AFP IVs. Taken together, our results do not support the hypothesis of evolution of AFP IV by selective pressure, suggesting that the antifreeze activity of AFP IV may have been gained by chance.

• Journal of Surface Science and Engineering
• /
• v.46 no.1
• /
• pp.9-15
• /
• 2013

The effect of the additionally applied electrical current on the adhesion strength between electroless Cu and polyimide films was investigated. Peel tests were performed after applying electrical current within the range from 0.1 to 100 mA for the duration from 1 to 30 minutes. Sample with more than 1 mA of additional electrical current for 1 minute showed higher adhesion strength than that without additional electrical current. However, samples with 10 mA of additional electrical current for more than 10 miniutes showed the degradation of adhesion strength. Ra and RMS values of the peeled polyimide surface were proportional to the adhesion strength though there were no significant changes in the morphology of the peeled surfaces with varied amount and time-length of additional electrical current. Applying electrical current could increase the density of chemical bonding, which results in increase of the adhesion strength between copper and polyimide. However, in the case of applying additional electrical current for excessive amount or time, the degradation of the adhesion strength owing to the formation of copper oxide at the interface could occur.

• The Korean Journal of Pain
• /
• v.33 no.2
• /
• pp.153-165
• /
• 2020

Background: Well-validated risk prediction models help to identify individuals at high risk of diseases and suggest preventive measures. A recent systematic review reported lack of validated prediction models for low back pain (LBP). We aimed to develop prediction models to estimate the 8-year risk of developing LBP and its recurrence. Methods: A population based prospective cohort study using data from 435,968 participants in the National Health Insurance Service-National Sample Cohort enrolled from 2002 to 2010. We used Cox proportional hazards models. Results: During median follow-up period of 8.4 years, there were 143,396 (32.9%) first onset LBP cases. The prediction model of first onset consisted of age, sex, income grade, alcohol consumption, physical exercise, body mass index (BMI), total cholesterol, blood pressure, and medical history of diseases. The model of 5-year recurrence risk was comprised of age, sex, income grade, BMI, length of prescription, and medical history of diseases. The Harrell's C-statistic was 0.812 (95% confidence interval [CI], 0.804-0.820) and 0.916 (95% CI, 0.907-0.924) in validation cohorts of LBP onset and recurrence models, respectively. Age, disc degeneration, and sex conferred the highest risk points for onset, whereas age, spondylolisthesis, and disc degeneration conferred the highest risk for recurrence. Conclusions: LBP risk prediction models and simplified risk scores have been developed and validated using data from general medical practice. This study also offers an opportunity for external validation and updating of the models by incorporating other risk predictors in other settings, especially in this era of precision medicine.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.43-51
• /
• 1993

It is very important entity that a map of urban facility is in civic life and development of city. But now, there are many needs of computerization which was used for management of urban facility map because inefficiency was produced due to management of urban facility map by hand. This paper, it was showed that a processing of establishing database in computer by applying GIS. The used sample area in studying in Ansan city in Kyunggi province and a sewer pipe which was in there adapted to establish database in computer. A map of administration district, which is 1:38,000, a map of complex urban planning of city, which is 1:3,000, and the facility map were used for the input of spatial data and the address, the year when sewer pipe was burried, and the quality of pipe, the pipe diameter, and the length of pipe were used as attribute data. Relational structure was used for establishment of database then, searching, analyzing, and processing were possible. Additionary, the result of this studying can be used for replacement of a old sewer pipe, a material quantity which is related with repairement of sewer pipe, and calculation of time, cost by application program framed by Fortran.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4985-4989
• /
• 2016

Long non-coding RNAs (lncRNAs) are a novel class of non-protein coding RNAs that are involved in a wide variety of biological processes. There are limited data regarding the impact of lnc-LAMC2-1:1 rs2147578 as well as CASC8 rs10505477 T>C polymorphisms on cancer development. Here we examined for the first time whether rs2147578 and rs10505477 polymorphisms are associated with childhood acute lymphoblastic leukemia (ALL) in a total of 110 cases and 120 healthy controls. Genotyping was achieved by the polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method. The rs2147578 variant increased the risk of ALL in codominant (OR=4.33, 95%CI=2.00-9.37, p<0.0001, CG vs CC, and OR=5.81, 95%CI=2.30-14.69, p=0.0002, GG vs CC), dominant (OR=4.63, 95%CI=2.18-9.86, p<0.0001, CG+GG vs CC), overdominant (OR=1.74, 95%CI=1.02-2.97, p=0.0444, CG vs CC+GG) and allele (OR=1.91, 95%CI=1.32-2.77, p=0.0008, G vs C) inheritance models tested. No significant association was found between the CASC8 rs10505477 T>C variant and risk of childhood ALL. In conclusion, the present study revealed that the lnc-LAMC2-1:1 rs2147578 polymorphism may be a risk factor for developing childhood ALL. Further studies with larger sample sizes with different ethnicities are now required to confirm our findings.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.285-291
• /
• 2008

This study was performed to find out starch properties of rice grains in three varieties with different amylose content, Ilpumbyeo (non-waxy), Goami2 (high amylose), and Hwasunchalbyeo (waxy rice). There was no difference among physico-chemical characteristics of rice grains, but Goami 2 showed $2{\sim}3$ folds higher crude fat (1.36%) than Ilpumbyeo. Pasting properties of RVA showed the highest values of maximum viscosity, breakdown, and final viscosity in Ilpumbyeo. A similar chain length distribution of amylopectin was found in Ilpumbyeo and Hwasunchalbyeo, indicating that DP 12 had the highest distribution. Goami 2 had the highest distribution in DP 14, and showed the lower percent (14.1%) than other rice cultivars. Thermal properties of DSC showed that the values of Tc and Tp of Hwasunchalbyeo were similar to Ilpumbyeo, whereas a slightly higher Tc was observed. The absorbtion enthalpy was also the highest (11.1 mJ/mg) in Hwasunchalbyeo. Goami 2 showed higher To, but the lowest enthalpy (6.52 mJ/mg) compared to Ilpumbyeo (7.92 mJ/mg). Retrogradation properties, which were measured with the gelatinized rice sample used for DSC, and stored in $4^{\circ}C$ during 6 days, indicated that retrogradation absorbtion peak was the first peak at $52.6{\sim}55.2^{\circ}C$, and the second peak above $95^{\circ}C$. Retrogradation enthalpy of Goami 2 was the highest value (5.12 mJ/mg).