• Journal of Microbiology and Biotechnology
• /
• v.13 no.1
• /
• pp.64-69
• /
• 2003

Pseudomonas chlororaphis HS21 was isolated from a soil sample and found to produce medium-chain-length polyhydroxyalkanoates (MCL-PHAs) using palm kernel oil (PKO) as the sole carbon source. Up to 3.3 g/1 dry cell weight containing $45\%$ MCL-PHA was produced, when the strain was grown for 21 h in a jar fermentor culture containing 5 g/1 PKO. The polymer produced from PKO consisted of unsaturated monomers of $7.3\%$ 3-hydroxy-5-cis-tetradecenoate and $2.3\%$ 3-hydroxy-5,8,-cis, cis-tetradecadienoate as well as saturated even-carbon number monomers ranging from $C_6\;to\;C_14$, as determined by GC and El GC/MS The PHA was a transparent, sticky material at room temperature. A differential scanning calorimetric analysis revealed that the polymer was amorphous with a $-44^{\circ}C$ glass transition temperature. The number average molecular weight and polydispersity index of the PHA were 83,000 and 1.53, respectively. Although the PHA was practically biodegradable, its degradability was lower than that of poly(3-hydroxyoctanoate) based on a comp:trison of the clear zones formed by growing PHA depolymerase-producing bacteria on an agar plate containing the respective polymers.

• Journal of KIISE:Software and Applications
• /
• v.34 no.9
• /
• pp.804-816
• /
• 2007

Sample training data for machine learning often contain irrelevant information or redundant concept. It is also the case that the original data may include noise. If the information collected for constructing learning model is not reliable, it is difficult to obtain accurate information. So the system attempts to find relations or regulations between features and categories in the teaming phase. The feature selection is to remove irrelevant or redundant information before constructing teaming model. for improving its performance. Existing feature selection methods assume that the distribution of documents is balanced in terms of the number of documents for each class and the length of each document. In practice, however, it is difficult not only to prepare a set of documents with almost equal length, but also to define a number of classes with fixed number of document elements. In this paper, we propose a new feature selection method that considers the impurities among the words and unbalanced distribution of documents in categories. We could obtain feature candidates using the word impurity and eventually select the features through unbalanced distribution of documents. We demonstrate that our method performs better than other existing methods via some experiments.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.214-229
• /
• 2011

The purpose of this study is to find strategic methods of quality management for customer satisfaction when developing clothing for middle and elderly women. For this study was middle and elderly women who were living in Seoul and Kyonggi-do. SPSS 11.5 statistical program was used for data analysis and to conduct factor analysis, reliability verification, paired-sample t-test, frequency analysis and percentage. The result were as follows; First, middle and elderly women's behavioral characteristic in purchasing clothing, the average price of formal suit was 700 thousand won and the time for purchasing was less than 3 months. They tended to purchase mostly by themselves on their own, and they purchase their own formal suit. Second, The body parts that influence the fit the most are in the order of waist circumference, shoulder width, chest circumference. Third, Regarding the difference of importance and satisfaction on the fit by body part that the middle and elderly women by body part, there was no significant different in neck circumference and shoulder swerve. Overweighing middle and elderly women showed difference in importance and satisfaction on all body parts. Underweighing middle-aged to aged women showed a significant difference in importance and satisfaction in the order of circumference of hips. Fourth, middle-aged women in 50s showed higher importance than satisfaction in the order of waist circumference, and elderly women in 60s should higher importance than satisfaction in rise length, jacket length. Aged women in 70s and above should significant difference only in the height of collar.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.273-282
• /
• 2008

Increasing demand for timber and the depletion of natural forest have encouraged utilization of many non-popular species. The understanding of wood properties and behavior is important to evaluate the potential of these species to produce high quality end products. This study determines the anatomical and physical properties of Hevea species viz Hevea pauciflora, Hevea guianensis, Hevea spruceana, Hevea benthamiana and Hevea brasiliensis. Each sample tree was cut into three different portions along the height (bottom- B, middle- M and upper -T parts) and two radial samples (outer- O and inner- I parts). H. brasiliensis clone RRIM 912 exhibited the longest fibre with $1214{\mu}m$, followed by H. benthamiana (HB, $1200{\mu}m$), H. pauciflora (HP, $1189{\mu}m$), H. spruceana (HS, $1158{\mu}m$) and H. guianensis (HG, $1145{\mu}m$). Fibre length has a positive correlation with specific gravity. The largest fibre diameter ($24.9{\mu}m$) and lumen diameter ($12.5{\mu}m$) were recorded in H. guianensis. The highest moisture content was obtained from H. spruceana (64.34%) compared to the lowest with 60.01% (Clone RRIM912). The higher moisture content is normally associated with lower strength. Overall, the properties of clone RRIM 912 is found to be comparatively better because of higher strength due to longer fibre length, thicker cell walls and higher specific gravity than the other Hevea species. Therefore, this species can be used as a general utility timber.

• Journal of Fashion Business
• /
• v.9 no.5
• /
• pp.15-36
• /
• 2005

The purpose of this study was to provide for the useful fundamental data by developing an appearl sizing system according to body types for Chinese adult female. Thus, it was to improve of fittness and coverage rate of exporting domestic clothing to China. As a sample, 1360 female women was seleted aged between 19 and 50 who resident in Beijing and Shanghai in China for characterization body types and development of apparel sizing system by classifying them. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, ANOVA(t-test and F-test), factor analysis, duncan's multiple test. The results from the study were as follows: As they are getting older, the horizontal size and length categories related to width, thickness, and circumference increased, and the height and vertical size that show the vertical size of body reduced. 1. The women in the Shanghai area had large head width, head thickness and head circumference, the categories related to the height and head, and the women in the Beijing area had larger in terms of width, circumference, length, angle and other categories. 2. Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1 : constitutional obesty and width size, factor 2 : longistudinal body size, factor 3 : shoulder form and size, factor 4 : longistudinal upper body size, factor 5 : longistudinal under body size, factor 6 : shoulder dropping.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2021

PURPOSE: This study compared the body composition according to the sport of short-distance and middle & long-distance athletes to identify the factors that affect the body composition. METHODS: Forty-eight athletes selected as youth national athletes in 2019 participated in the study. The study participants measured the length of the lower extremities, body composition, and anaerobic ability. An independent sample t-test was conducted to compare the body composition according to the event. In addition, the Pearson correlation was performed to identify the factors that influence the body composition. RESULTS: The leg length of the Short and Middle & long-distance athletes were similar (p = .584). On the other hand, there were differences in the body fat percentage (p = .001), lean percentage (p = .001), and BMI (p = .001). In addition, the body fat percentage was correlated with the lean body mass (r = .419) and BMI (r = .447). Furthermore, the lean body mass was correlated with the BMI (r = .849) and the peak power (r = .662) and mean power (r = .686) of the anaerobic capacity. Moreover, the BMI was correlated with the peak power (r = .490) and mean power (r = .543) of the anaerobic capacity. The peak power of the anaerobic ability was correlated with the mean power (r = .931). CONCLUSION: The body composition differed according to the sport. The body fat percentage correlated with the lean body mass and the BMI. The lean body mass correlated with the BMI, peak power of anaerobic ability, and mean power. The BMI correlated with the anaerobic capacity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.80-84
• /
• 2015

Softness is considered one of the most important attributes of hygiene paper such as tissue and towel. Being subjective in nature, however, softness attribute has been generally believed to be impossible to evaluate using objective methods. Hallmark in his pioneering work proposed that tissue subjective softness should be mainly consisted of the bulk softness component and surface softness component. The bulk softness component can be determined by tensile stiffness; the surface softness component by surface tester. The surface friction turns out far more important than the surface roughness in determining the surface softness component. It cannot be too much emphasized that both results of the tensile stiffness and the surface friction should depend on measuring conditions such as an instrument used, sample sizes (e.g., basis weight, length, and width) and operating conditions of the instrument (e.g., gauge length, cross-head speed, size of stylus, and its scanning speed). This indicates that a direct comparison of the test results would be impossible or misleading unless they have been tested under the identical conditions. This may explain why the standard objective test method for tissue softness has not been available at present.

• The Research Journal of the Costume Culture
• /
• v.23 no.2
• /
• pp.284-293
• /
• 2015

This study intends to analyze the fit of directly-imported American casual pants for Korean female college students in terms of appearance and comfortableness. The authors carried out a wearing test with sample pants from 3 brands (DKNY: A, Gap: B, Polo: C) that had the most market share and that were mostly preferred by Korean female college students. Results showed that pants A had insufficient ease in the crotch, as the depth of the crotch was short. The hip girth received a low assessment in terms of appearance. Moreover, the hem widths were wide while the pants length was long. Pants B were expected to be most appropriate for Korean women's bodies, as they had the longest crotch depth among the three brands. However, the pants appeared to pull downward due to the narrow thigh and the knee girth and hem width. Moreover, the crotch girth and hip girth received a poor appearance assessment. Pants C were rated as satisfactory for their thigh girth, knee girth, and hem width. However, the crotch was uncomfortable, as it had a short crotch depth. The hip girth received a low appearance assessment. This study suggests that a pattern adjustment is required for directly-imported American pants to provide a better fit for the bodies of Korean women. The crotch depths should be approximately 17.5 cm. The hem widths should be approximately 20 cm. We also suggest a leg length of 75 cm, a waist girth of 86 cm, and a hip girth of 97 cm.

• Health Policy and Management
• /
• v.28 no.1
• /
• pp.53-69
• /
• 2018

Background: This study investigates association modified category medical specialization (CMS) and hospital charge, length of stay (LOS), and mortality among lumbar spine disease inpatients. Methods: This study used National Health Insurance Service-cohort sample database from 2002 to 2013, using stratified representative sampling released by the National Health Insurance Service. A total of 56,622 samples were analyzed. The primary analysis was based on generalized estimating equation model accounting for correlation among individuals within each hospital. Results: Inpatients admitted with lumbar spine disease at hospitals with higher modified CMS had a shorter LOS (estimate, -1.700; 95% confidence interval [CI], -1.886 to -1.514; p<0.0001). Inpatients admitted with lumbar spine disease at hospitals with higher modified CMS had a lower mortality rate (odds ratio, 0.635; 95% CI, 0.521 to 0.775; p<0.0001). Inpatients admitted with lumbar spine disease at hospitals with higher modified CMS had higher hospital cost per case (estimate, 192,658 Korean won; 95% CI, 125,701 to 259,614; p<0.0001). However, inpatients admitted with lumbar spine surgery patients at hospitals with higher modified CMS had lower hospital cost per case (estimate, -152,060 Korean won; 95% CI, -287,236 to -16,884; p=0.028). Inpatients admitted with lumbar spine disease at hospitals with higher modified CMS had higher hospital cost per diem (estimate, 55,694 Korean won; 95% CI, 46,205 to 65,183; p<0.0001). Conclusion: Our results showed that increase in hospital specialization had a substantial effect on decrease in hospital cost per case, LOS, and mortality, and on increase in hospital cost per diem among lumbar spine disease surgery patients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.831-835
• /
• 2008

We present a continuous electrical cell lysis chip, using a DC bias voltage to generate the focused high electric field for cell lysis as well as the electroosmotic flow for cell transport. The previous cell lysis chips apply an AC voltage between micro-gap electrodes for cell lysis and use pumps or valves for cell transport. The present DC chip generates high electrical field by reducing the width of the channel between a DC electrode pair, while the previous AC chips reducing the gap between an AC electrode pair. The present chip performs continuous cell pumping without using additional flow source, while the previous chips need additional pumps or valves for the discontinuous cell loading and unloading in the lysis chambers. The experimental study features an orifice whose width and length is 20 times narrower and 175 times shorter than the width and length of a microchannel. With an operational voltage of 50 V, the present chip generates high electric field strength of 1.2 kV/cm at the orifice to disrupt cells with 100% lysis rate of Red Blood Cells and low electric field strength of 60 V/cm at the microchannel to generate an electroosmotic flow of $30{\mu}m/s{\pm}9{\mu}m/s$. In conclusion, the present chip is capable of continuous self-pumping cell lysis at a low voltage; thus, it is suitable for a sample pretreatment component of a micro total analysis system or lab-on-a-chip.