• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.471-475
• /
• 2017

This study aims to suggest the methodology to improve to estimate back-calculated fish growth parameters using weighted average. It is to contribute to correct errors in the calculation of back-calculated growth equation with unequal numbers of sample by age. If the numbers of sample were evenly collected by age, each back-calculated length at age was equal between arithmetic and weighted averages. However, most samples cannot be evenly collected by age in reality because of different catchability by fishing gear and limitation of environment condition. Therefore, the estimation of back-calculated length by weighted average method is essential to calculate growth parameters. There were some published growth equations from back-calculated length using a simple arithmetic average with different numbers of samples by age when searching for back-calculated growth equations from 91 relevant papers. In this study, the process of deriving growth equation was investigated and two different average calculations were applied to a fish growth equation, for example of Acheilognathus signifer. Growth parameters, such as $L_{\infty}$, k and $t_0$, were estimated from two different back-calculated averages and the growth equations were compared with growth performance index. Based on the correction of back-calculated length using weighted average by age, the changes by female and male were -14.19% and -5.23% for $L_{\infty}$, and 59.28% and 18.91% for k, respectively. The corrected growth performance index by weighted average improved at 7.05% and 2.46% by female and male, respectively, compared to the arithmetic averages.

• Korea Journal of Hospital Management
• /
• v.3 no.1
• /
• pp.100-120
• /
• 1998

Tertiary been increasing rapidly. There has been shortage of beds in hospitals and effective management of beds had to b considered. For the efficient utilization of the exsisting hospital beds, bed turnover rate ha to be high and their length of stay in hospital has to be shortened. The sample of this study was in-patients admitted in 13 clinical departments of a tertiar hospital in Wonju. Daily medical fees through length of stay in hospital were observed an we analyzed the increase of hospital revenues per bed for the shortening of length of stay. The results of the analysis were as follows: 1. The average length of stay by dept. was 11.0 in dept. of internal medicine. 12.4 in dept. of general surgery, 7.1 in dept. of gynecoloty, 6.8 in dept. of pediatrics, 26.1 in dept. of nervous surgery, 21.6 in dept. of orthopedic surgery, 25.5 in dept. of plastic sersury, 7.6 in dept. of ophthalmology, 7.1 in dept. of E.N.T, 8.1 in dept. dermatoloty, 9.0 in dept. urology. 2. The trend of daily medical fees of in-patients was the highest from the first day to the third day. Because most necessary examination and various treatment or operation took place in these period. 3. The estimative model for medical fees by the length of stay at each clinical department was inferred. 4. The increased revenue per bed by shortening the length of stay was calculated by the estimative model. Shortening one day would increase 305,999 thousand won in dept. of internal medicine 232,138 thousand won in dept. of general surgery., 177,795 thousand won in dept. of gynecology medicine, 69,031 thousand won in dept. of pediatrics 360,381 thousand won in dept. of nervous surgery 211.339 thousand won in dept. of orthopedic surgery, 100,249 thousand won in dept of plastic surgery, 10,569 thousand won in dept. of ophthalmology -814,122 thousand won in dept. of E.N.T, 1,582 thousand won in dept. of dermatology, -5,821 thousand won in dept. of urology. It is expected that they can improve their profitability by shortening the length of stay of the in-patients.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.27-30
• /
• 1973

The present research has been carried out in an attempt to obtain fundamental data which contribute to enhansing the accuracy of cocoon reeling test and improving the method of it more effectively. The results obtained are as follows: 1. The standard deviation and coefficient of variation of percentage of reelability and of percentage of raw silk yield to the sample size tended to show a gradual decrease according to the increasing of the sample size. However, the significant differences in the standard deviation and coefficient of variation of percentage of reelability and of percentage of raw silk yield between the different sizes of the samples having more than 300 cocoons have not been observed according to their sizes. 2. The significant difference in the standard errors from percentage of reelability between the samples of 300 cocoons and 400 cocoons have not been observed. 3. The significant difference in the standad errors from percentage of raw silk yield between the samples of 300 cocoons, 500 cocoons and 600 cocoons have not been observed. 4. The significant difference in the standard deviation, the standard errors and coefficient of variation to the length of a bave between the different sizes of the samples have not been shown. 5. From the above result, it is estimated that the optimum sire of the sample for the cocoon reeling test is the 300 cocoons.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3444-3450
• /
• 2013

Three phase hollow fiber-liquid phase microextraction (HF-LPME), which is faster, simpler and uses a more environmentally friendly sample-preparation technique, was developed for the analysis of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) in human urine. For the effective simultaneous extraction/concentration of NSAIDs by three phase HF-LPME, parameters (such as extraction organic solvent, pH of donor/acceptor phase, stirring speed, salting-out effect, sample temperature, and extraction time) which influence the extraction efficiency were optimized. NSAIDs were extracted and concentrated from 4 mL of aqueous solution at pH 3 (donor phase) into dihexyl ether immobilized in the wall pores of a porous hollow fiber, and then extracted into the acceptor phase at pH 13 located in the lumen of the hollow fiber. After the extraction, 5 ${\mu}L$ of the acceptor phase was directly injected into the HPLC/UV system. Simultaneous chromatographic separation of seven NSAIDs was achieved on an Eclipse XDB-C18 (4.6 mm i.d. ${\times}$ 150 mm length, 5 ${\mu}m$ particle size) column using isocratic elution with 0.1% formic acid and methanol (30:70) at a HPLC-UV/Vis system. Under optimized conditions (extraction solvent, dihexyl ether; $pH_{donor}$, 3; $pH_{acceptor}$, 13; stirring speed, 1500 rpm; NaCl salt, 10%; sample temperature, $60^{\circ}C$; and extraction time, 45 min), enrichment factors (EF) were between 59 and 260. The limit of detection (LOD) and limit of quantitation (LOQ) in the spiked urine matrix were in the concentration range of 5-15 ng/mL and 15-45 ng/mL, respectively. The relative recovery and precision obtained were between 58 and 136% and below 15.7% RSD, respectively. The calibration curve was linear within the range of 0.015-0.96 ng/mL with the square of the correlation coefficient being more than 0.997. The established method can be used to analyse of NSAIDs of low concentration (ng/mL) in urine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.7 s.155
• /
• pp.1090-1102
• /
• 2006

The purpose of this study is to develop an improved work clothing which is much safe, comfortable, mobility and convenient than what workers currently wear at construction site. The investigation has been conducted to evaluate current work clothing to grasp any problems, discomforts and damages related to the work clothing. For the best and accurate data, hands-on investigation and a short-interview have been performed at the construction site as well as formulating a questionnaire. The questionnaires was answered by 425 workers and safety manager of 13 different construction site. The result of the questionnaire enables us to design a sample work clothing, many pa π s such as material, pattern and design have been improved. To improve the amenity of heat, the surface of a material was used by $Aerocool^{\circledR}$ fiber which contains inside dryness function. In order to absorb perspiration on the back the armpits, mesh martial that is mixture of $Coolever^{TM}$ fiber and $Mirawave^{TM}$ fiber was used to absorb perspiration in an effective manner. And a sleeve's bottom part and trousers' bottom part's cover method have been changed. Sample work clothing was shorten at the side of upper garment up to 2cm and lengthen the length of the back by 3cm. To reduce the tightness around armpit more room was given in that area. Darts were added to the elbow, the hip, and the knees that also followed an ergonomic pattern. A sample work clothing evaluated an objective assessment and subjective assessment to compare to a current work clothing. Assessment group consists of seven subject groups and nine expert groups to evaluate external appearance and adaptability to the movements. In all aspects of the test, the result of evaluation process of the sample work clothing received more positive assessment than the current work clothing.

• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.220-226
• /
• 2000

This study was to determine the characteristics of vapor-permeable waterproof finished fabric by the coating method. 4 different kinds of coating fabrics (A : wet, porous, polyurethane, B : dry, no porous, polyurethane, C : shape memory polyurethane and D : dry, porous polyurethane) were used, which were developed recently With this sample, moisture transport rate ($40^{\circ}C$, 45%RH & $40^{\circ}C$, 95%RH), changes of coating side's shape by washing times, water repellency rate, contracted length, qmax, heat conductivity, heat keeping rate, heat keeping rate with cotton, heat keeping rate on humidity temperature and humidity within clothing etc. were checked. And it was done in a climate chamber under $20{\pm}2^{\circ}C$, $65{\pm}5%RH$. The results of this study were as follow; In the moisture vapor transmission of sample B and C increased on high temperature and high humidity while sample A and D decreased, on this condition. Qmax rate had high relation with ground fabric's surface properties and the order was A>C>D>B. Heat conductivity had high relation with thickness and surface properties. Heat keeping rates on sweat condition showed around half percents of heat keeping rates on normal condition, but had no relation with moisture vapor transport rate. Changes of the fabric's properties by washing times were different in accordance with the construction of fabrics and the coating resin. Sample C had tow heat keeping rate on the high temperature and humidity and high heat keeping rate on the low temperature and humidity Moisture transport rate of vapor-permeable waterproof finished fabrics had high relation with the properties of ground fabrics on low humidity condition, but on the high humidity condition, it was highly related with the properties of coating resin.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.257-264
• /
• 2018

Background: This paper presents the findings of a pilot research survey which assessed the degree of balance between safety and productivity, and its relationship with awareness and communication of human factors and safety rules in the aircraft manufacturing environment. Methods: The study was carried out at two Australian aircraft manufacturing facilities where a Likert-scale questionnaire was administered to a representative sample. The research instrument included topics relevant to the safety and human factors training provided to the target workforce. The answers were processed in overall, and against demographic characteristics of the sample population. Results: The workers were sufficiently aware of how human factors and safety rules influence their performance and acknowledged that supervisors had adequately communicated such topics. Safety and productivity seemed equally balanced across the sample. A preference for the former over the latter was associated with a higher awareness about human factors and safety rules, but not linked with safety communication. The size of the facility and the length and type of employment were occasionally correlated with responses to some communication and human factors topics and the equilibrium between productivity and safety. Conclusion: Although human factors training had been provided and sufficient bidirectional communication was present across the sample, it seems that quality and complexity factors might have influenced the effects of those safety related practices on the safety-productivity balance for specific parts of the population studied. Customization of safety training and communication to specific characteristics of employees may be necessary to achieve the desired outcomes.

• The Journal of Korean Medicine
• /
• v.35 no.1
• /
• pp.1-9
• /
• 2014

Objectives: This study was to propose a standardized method of retention enema by extracting elements associated with published experimental methods of retention enema. Methods: 1) Literature search (1) Data sources: Retrieval was made, using 'Enema' or 'Retention Enema' as search words in Medline, Cochrane library, KISS, RISS, and KDSL DB. (2) Study selection: Two authors excluded irrelevant papers and chose qualified abstracts from the rest of the papers. The chosen studies were reviewed fully by the authors so that they could screen the significant papers based on the exclusion criteria. (3) Data extraction: Data on the total number of subjects, the target disease, the animal species, the type, quality, length, and diameter of catheter, the insertion length of catheter, the sample, the sample volume, the process of retention enema and the number of retention enemas performed were extracted from the selected studies. 2) Performing preliminary experiments about the elements associated with experimental methods of retention enema. Results & Conclusions: The standardized experimental method is as follows: animal: 280-320g SD rat 1) inserting a rectal tube of 8 Fr that measures 8 cm into the animal's anus, 2) injecting herbal medicines at the volume of 6ml and 3) holding them for 10 minutes.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.103-114
• /
• 1993

The purpose of this study was to determine whether any difference existed in craniofacial morphology between parents of children with cleft lip and/or palate and parents of children without cleft lip and/or palate as well as the characteristics of craniofacial morphology in parents of children with cleft lip and/or palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in parents of 28 children with cleft lip and palate, 18 children with cleft lip, and 22 children with cleft palate. There were 28 couples and 40 single parents in this sample. There were 92 individuals including 41 males and 51 females. The measurements were compared with those in control subjects, including 40 adult males and 40 adult females, who had no history of craniofacial abnormalities. The total sample was compared for the sex independently. The obtained results were as follows. 1. In the cranium, both parents of cleft children had significantly shorter posterior cranial base length(S-Ba). 2. In the upper face, a significantly shorter anteroposterior length of maxilla(A'-Ptm'), particularly in the anterior region (A'-K), anterior facial depth(A-SBaL), posterior facia! height(Ptm'-SNL) and relation of subnasale to the cranial base (∠BaN'Sn) were noted in fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers. 3. In the lower face, both parents of cleft children showed a significantly greater Y axis angle(∠NSGn) and ramal plane angle(∠SNL-RP) in fathers of cleft children. Thus both patents showed a posteriorly rotation of mandible. The thickness of the lower lip(B-B') was significantly thicker in fathers of cleft children. 4. In the facial profile, a significantly shorter posterior facial height(S-Go) and greater angle of soft tissue facial convexity (∠BaN'Pog') were noted in the fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.1
• /
• pp.13-20
• /
• 2023

Objectives: Ultra-wide implants may be used as a replacement if existing implants fail. This study was conducted to evaluate the factors influencing the prognosis and failure of ultra-wide implants. Patients and Methods: This study evaluated whether sex, age, site, diameter, length, additional surgery, implant stability (primary and secondary), and reason for ultra-wide implant placement affect the 5-year survival and success rates and marginal bone loss (MBL) of ultra-wide implants. Seventy-eight ultra-wide implants that were placed in 71 patients (39 males and 32 females) from 2008 to 2010 were studied. One-way ANOVA analysis was conducted to evaluate the statistical significance of MBL according to the patient's sex, implant site, and diameter. Independent sample t-tests were used to determine the statistical significance of MBL analysis which was used to determine the significance of the 5-year success and survival rates related to the variables. One-way ANOVA was conducted to evaluate the statistical significance of sex, implantation site, diameter, and MBL. Independent sample t-tests were used to evaluate the correlation between implantability and MBL for implantation reasons, while additional surgery, length, and Kaplan-Meier analysis were used to evaluate 5-year survival and success rates. Results: The mean age of patients was 54.2 years with a survival rate of 92.3% and a success rate of 83.3% over a mean 97.8-month period of observation. MBL averaged 0.2 mm after one year of prosthetic function loading and 0.54 mm at the time of final observation. Success rates correlated with primary stability (P=0.045), survival rates correlated with secondary stability (P=0.036), and MBL did not correlate with any variables. Conclusion: Ultra-wide implants can be used to achieve secure initial fixation in the maxillary and mandibular molar regions with poor bone quality or for alternative purposes in cases of previous implant failure.