• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.363-369
• /
• 2012

Shear tests parallel to the grain were conducted on domestic wood samples with different growth ring orientations. Shear strength was dependent on the angles between the direction of growth ring orientation and the applied force. The maximum shear strength showed at the intermediate growth ring orientations. Results of shear tests were also used to modify the formula which had previously been developed to predict the withdrawal strength of screw on the face of lumber. Predicted equations were fitted to the results of previous study with different length of No. 8 screw. Predicted equation was under-predicted the withdrawal strength of 25 and 30 mm length of screw within 8% and over-predicted withdrawal strength of 18 and 38 mm length of screw. A little differences between the predicted by shear strength with different growth ring orientation and observed values was existed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.163-172
• /
• 2014

To investigate the possibility of developing the seeding measure for river bank slope revegetation, germination experiment and early growth observation were conducted using 3 native species growing naturally around river banks such as Pennisetum alopecuroides, Phragmites communis, and Miscanthus sinensis. The applied seeding methods were 3 such as scattering seeds, tillage after scattering seeds, and covering up seed with soil after scattering seeds. According to seeding methods, germination experiment and early growth observation were carried out on nursery bed soil in greenhouse. As results of this study, all the 3 native plant species' germination ratio and growth in length on nursery bed soil were highest on the seeding method of covering up seed with soil. Also it was verified by Duncan's multiple range test that the germination ratio and growth in length on the seeding method of covering up seed with soil is distinguished from those on other two seeding methods. According to this results, the best possible seeding measure to be developed should be mechanical seed spraying with soil.

• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2011

The main goals of treatment of malignant bone tumor are the prolongation of life survival and the improvement of quality of life. In growing children, however, leg length discrepancy (LLD) is one of major problem in the treatment of malignant bone tumors. Therefore, the precise understanding of growth in children is essential, and the prediction of LLD is critical in deciding the time and options of surgery. In addition, to use the adequate method of growth expectation, periodic follow-up and collaboration with patient's parents are needed.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.97-103
• /
• 1997

Larval growth of the oyster, Crassostrea nippona, was investigated at the different conditions such as water volume, depth of culture vessel and initiative feeding time at $23^{\circ}C$. As a result, morphological changes were occurred during the early larval growth. That is, shell length was higher than shell height at the time of D-shaped larvae. Later, the length became equal to the hight when their shell length reached $127\mum$and then shell height increased rapidly. Some of pediveliger larvae with the size of $360\mum\;in\;shell\;length\;and\;385\mum$ in shell height began to temporarily settle on the substrate after 18 days. The result also indicated that the depth of culture vessel turned out to be an important factor rather than water volume for the larval growth. The fist feeding time of oyster larvae appeared to be the first day after fertilization.

• Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.78-87
• /
• 2021

Background: To understand shade and wind effects on seedling traits of common reed (Phragmites australis), we conducted a mesocosm experiment manipulating day length (10 h daytime a day as open canopy conditions or 6 h daytime a day as partially closed canopy conditions) and wind speed (0 m/s as windless conditions or 4 m/s as windy conditions). Results: Most values of functional traits of leaf blades, culms, and biomass production of P. australis were higher under long day length. In particular, we found sole positive effects of long day length in several functional traits such as internode and leaf blade lengths and the values of above-ground dry weight (DW), rhizome DW, and total DW. Wind-induced effects on functional traits were different depending on functional traits. Wind contributed to relatively low values of chlorophyll contents, angles between leaf blades, mean culm height, and maximum culm height. In contrast, wind contributed to relatively high values of culm density and below-ground DW. Conclusions: Although wind appeared to inhibit the vertical growth of P. australis through physiological and morphological changes in leaf blades, it seemed that P. australis might compensate the inhibited vertical growth with increased horizontal growth such as more numerous culms, indicating a highly adaptive characteristic of P. australis in terms of phenotypic plasticity under windy environments.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.108-120
• /
• 2004

Object : Patients with facial asymmetry accompanying mandibular prognathism have various causes and clinical features. So, it is difficult to find a satisfactory treatment method functionally and esthetically. Every traditional classification and interpretation to find etiopathogenesis and/or to establish ideal surgical modality has many limitations because it can't be applied simply to various conditions of patients with facial asymmetry accompanying mandibular prognathism. Therefore, we employ a new classification to interpret more details of the morphologic change of mandible and the spatial change of mandible and maxilla. Materials and Methods : Using panoramic X-ray films, PA cephalograms and submentovertex films of 126 patients diagnosed with facial asymmetry accompanying mandibular prognathism as resources, the following results were gathered after analyzing each characteristics through distributing the patterns according to the morphological mandibular asymmetry and mandibular and maxillary spatial asymmetry. Results : Almost frequency of morphological mandibular asymmetry was shown. In case of condyle-ramus elongation and body elongation group, it's frequency was the highest. Higher frequency of compensating vertical growth was shown on the side of over growing maxilla in case of vertical length difference between left and right condyle-ramus. On the other hand, higher frequency of no compensating vertical growth difference between left and right side was shown in case of no vertical length difference in condyle-ramus. Spatial mandibular asymmetry generally occurred when there was no morphological mandibular asymmetry. Correlation between condyle length difference and condyle-ramus length difference between left and right side was very high, but correlation between condyle length difference and body length difference, and correlation between condyle length difference and body vertical length difference was low. Conclusion : In case of patients with facial asymmetry accompanying mandibular prognathism, it is suggested that various pattern of facial asymmetry is occurred by the independent growth of each unit rather than dependent growth of other unit by major growth unit abnormality. Due to the untypical pattern and the various asymmetry occurring according to the changes of each mandibular growth unit, it is considered that an appropriate surgical method should be searched based on the accurate recognition of the each pattern for patients with facial asymmetry accompanying mandibular prognathism.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.4
• /
• pp.232-238
• /
• 2005

This paper describes reproduction, population structure, growth and size at sexual maturity of a deep-water mud shrimp (Solenocera melantho) in the adjacent waters of Geomun Island, Korea. The shrimp was caught by a beam trawl from November 1998 to December 1999. Spawning period was estimated by gonadosomatic index to be from August to early November with a peak in October to early November. Female shrimps were $12\%$ matured at 16 mm in carapace length, $33\%$ matured at 18 mm and $75\%$ matured at 22 mm. The size at $50\%$ maturity for female was estimated to be 20.65 mm in carapace length. Breeding season was estimated to be from August to early November with a peak in October to early November. The size at $50\%$ inseminated was 19.81 mm CL. The fecundity was 87,500-405,200 and related exponentially to carapace length and total weight. This species survived between 25 and 26 months. The maximum carapace length of females and males were 48 mm and 34 mm respectively. Sex ratio was $51.3\%$, and the females were preponderant. Growth was estimated by modified von Bertalanffy growth function incorporating seasonal variation in growth in both years females (K=1.019/yr and $L_{\infty}$=51.731 mm CL) grew faster, reaching a larger size at a given age than males (K=1.848/yr, and $L_{\infty}$=27.499 mm CL). This is indicated by differences in growth performance indices $(\varphi')$ between females (3.291) and males (3.145).

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.653-662
• /
• 2014

This study was determined the hair growth effect and mode of action of a complex extract (abelmo), extracted from various natural plants including Acorus calamus var. angustatus. 30 six-week old C57BL/6 mice were randomly assigned into three treatment groups with ten mice per treatment group repeatedly. The treatment group is a control group, and was classified into saline-applied, minoxidil 5%-applied, and abelmo-applied groups. Hair growth started from the abelmo-applied and minoxidil 5% -applied groups on the 9th day, compared to the saline-applied group. Hair growth rate was 17.06% and 19.15% in those two groups, respectively, and the abelmo-applied group's hair growth rate was higher. The density, length and thickness of hair were significantly higher in the order of abelmo-applied group, minoxidil 5%-applied group and saline-applied group on the 9th day, and hair root was strongly maintained in the abelmo-applied group. The density, length and thickness of hair in the abelmo-applied group were significantly higher by 599.8, 122.2 and 181.8% on the 9th day compared to the saline-applied group, and 166.7, 171.4 and 200.2% on the 12th day, and 136.6, 216.9 and 180.7%, respectively on the 15th day. As for hair follicle and the length of hair shaft from the dosal skin histopathology manifestation, the abelmo-applied group was more excellent than the saline-applied group and minoxidil 5%-applied group. This result actually confirmed the fact that abelmo promotes hair growth and strongly maintains hair root simultaneously.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.238-238
• /
• 2009

In this work, we investigated the effect of the Zn complex concentration and growth temperature on the growth of ZnO nanorod by hydrothermal method. The ZnO nanorods were performed at condition of the various Zn complex concentration and growth temperature, 0.02 ~ 0.08 M and 60 ~ 80 $^{\circ}C$, respectably. We found from the SEM results that the diameter and length of ZnO nanorods were with increasing the growth temperature and Zn complex concentration. However, the growth condition in the two parameters wasmore than sensitive compared to Zn complex concentration on increasing the growth rate. From photoluminescence(PL) analysis, the strong band-edge emission for ZnO nanorod grown at 80 $^{\circ}C$ with 0.08 M indicated the fine crystallinity. Therefore, the diameter and length of ZnO nanorods have been able to control through the control of front growth parameters. Also, these ZnO nanorods grown low temperature will be available as building block for transparence flexible device applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.203-206
• /
• 2001

The applicability of shaped growth of yttrium orthovanadate was approved by successful growth of rod-like single crystals with the rectangular shape. Nd-doped single crystals with content of $Nd^{3+}$ ions of 1,2,3,5 atomic % in the starting melt were grown by the EFG technique with the size up to $10^{*}10mm$ in section and up to 85 mm in length. For the testing of the multiple growth of the orthovanadates, two and three Nd-and Yb-doped $YVO_{4}$ single crystals were grown by the EFG technique simultaneously up to 110 mm in length.