• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제34권3호
• /
• pp.711-721
• /
• 2014

PPWS, a large number of which a main cable of a suspension bridge consists of, must be precisely erected at a target location under construction considering the differences among design conditions. The absolute sag is measured for several PPWSs, which are reference strands and the relative sag is surveyed from them to other PPWSs, which are divided into several groups. And the adjustment of PPWS length is performed to erect it at target configuration. When PPWS is being under erection in a real bridge site, the procedures are as follows; evaluate sag sensitivities according to sag variation factors, calculate an adjustment length of PPWS corresponding to them and adjust a sag of PPWS by controlling the calculated amount of PPWS length. In this study, the differential-related equations of sag sensitivity were proposed for support movement of PPWS. Before site demonstration study of a series of them, we established a catenary model system and accomplished verification tests of them. From test results, the validation of them was done.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.325-339
• /
• 2018

In this paper, we propose a joint adaptive combining and variable tap-length multiuser detector (MUD) for amplify-and-forward (AF) underwater acoustic cooperative interleave-division multiple access (IDMA) communication system. The proposed MUD jointly realizes tap-length adjustment, adaptive combining, and multiuser detection. In contrast to the existing methods, the proposed detector can adaptively combine the received signals from different nodes at destination, and does not need the assumption that full and perfect channel state information (CSI) of all the links at the receiver is known. Moreover, the proposed detector can adaptively adjust the tap coefficient vector and tap-length of each branch according to the specific channel profile of each branch. Simulation results validate the feasibility and show the advantages of the proposed detector against existing counterparts.

• The Korean Journal of Health Service Management
• /
• 제8권4호
• /
• pp.47-55
• /
• 2014

The purpose of this study was to analyze the differences in the outcome for CABG according to whether hospitals provided heart related surgeries. The 2011 National Inpatient Sample (NIS) and inpatient quality indicator principles from the Healthcare Research and Quality (AHRQ) were used for analysis. Hospitals were divided into three groups according to the surgeries they provided. The length of stay and in-hospital deaths were adjusted for the differences in risks. ANOVA was performed to examine the differences for the risk-adjusted in-hospital mortality rate and risk-adjusted length of stay among the three groups. The analysis results showed that hospitals providing CABG, PTCA, and PHS had lower risk-adjusted in-hospital mortality rates or similar risk-adjusted lengths of stay compared to those of hospitals providing only CABG. However, the three groups did not have statistically significant differences in outcome indicators. Another study will be needed with a larger sample.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.835-844
• /
• 2002

For the one-way random model when the ratio of the variance components is of interest, Bayesian analysis is often appropriate. In this paper, we develop the noninformative priors for the ratio of the variance components under the balanced one-way random effect model. We reveal that the second order matching prior matches alternative coverage probabilities up to the second order (Mukerjee and Reid, 1999) and is a HPD(Highest Posterior Density) matching prior. It turns out that among all of the reference priors, the only one reference prior (one-at-a-time reference prior) satisfies a second order matching criterion. Finally we show that one-at-a-time reference prior produces confidence sets with expected length shorter than the other reference priors and Cox and Reid (1987) adjustment.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제34D권1호
• /
• pp.41-48
• /
• 1997

Design rules of directional coupler optical switches are discussed in consideration of parasitic couplings in the bending section. The parasitic coupling phenomenon is analyzed based on the coupled-mode theory and the solutions are represented in the form of the transfer matrix. The modified switching conditions due to the parasitic coupling are derived and the resultant switching diagrams are illustrated. It is revealed that the parallel section's length needs to be adjustd less than the coupling length $l_c(=\pi/2\textsc{k}o)$ to obtain the desired crosstalk and that the adjustment depends on the strength of the parasitic coupling. However, it is discovered that, for weak parasitic coupling, the switching voltage does not need to be altered but may maintain the same value as if no parasitic coupling is taken into account.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.711-714
• /
• 2008

The objective of this study is to analyze the relationship between the watershed characteristics and the critical duration of design rainfall. For estimation of critical duration, adjustment Huff's method and ILLUDAS urban runoff model were applied to urban 21 areas. Watershed characteristics such as area, channel length, channel slope, shape factor, and pipe density were used to simulate correlation analysis. The conclusions of this study are as follows; it is revealed that critical duration is influenced by the watershed characteristics such as pipe density, area and channel length. Also, multiple regression analysis using watershed characteristics is carried out and the determination coefficient of multiple regression equation shows 0.972.

• Journal of architectural history
• /
• 제26권3호
• /
• pp.39-49
• /
• 2017

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

• Aerospace Engineering and Technology
• /
• 제4권1호
• /
• pp.171-178
• /
• 2005

An acoustic analysis of a fuel-rich gas generator for the drive of a turbopump in a liquid rocket engine has been performed and the length of a simulating duct has been determined by comparing the resonant frequency of unstable acoustic modes to simulate an actual flight model gas generator. To simulate more realistically, a realistic short-length simulating duct has been determined by considering 1 or 2 wavelength of the unstable modes. Duct-length adjustment to turbopump can be a method to suppress a combustion instability problem by decoupling of acoustic mode and combustion characteristics. This method has been set up and validated with acoustic analysis and hot firing tests.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.223-230
• /
• 2009

For pulse trigger way and the energy injection rate according to PET ($Pause^{10-90}$ $Energy^{20-40}$ $Trigger^{1-7}$) function, indeed, human body condition, period of dormancy in this research about this back correctly adjustment possible and designed harmless micro carrying along style hair exclusion so that can design and manufacture and run special quality examination and Xenon flash lamp to crawl in human body. Because creating individual's skin model to do stable treatment by light transmission way by skin impedance and measure, must embody treatment special quality of most suitable that draw skin color, energy, wave length, approximately, transmission time, pulse delay etc. and want. Specially, saved standard of war treatment pulse modeling by skin impedance, and manufacture pulse modeling system of most suitable by skin subordinate, and embody suitable treatment pulse. Specially, embody as could do root of a hair exclusion being emitted in pulse form using multi wave length of 560nm, 590nm, 640nm, 755nm and embodied clinical data. If become research repletion furthermore little more, is seen that can approximate in commercialization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.31-32
• /
• 2006

A signal conditioning circuit for capacitive sensors was developed using a commercial single chip solution. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. Up to now, several companies already have succeeded in the development of the capacitive sensors system and they are commercially available in the market. In this research, to construct the signal processing circuits more easily and simply, we used a universal LVDT signal conditioner (AD698). Since the AD698 provides one chip solution for a basic signal processing including modulation and demodulation using various internal components, we can build the processing circuits successfully with minimal additional circuits: a compensation circuits for the drift caused by the bias current of OP amplifiers and a fine adjustment circuit for the elimination of nonlinearity. The signal processing circuits shows nonlinearity less than 0.05% in the comparison with a laser interferometer.