• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 추계학술대회논문집
• /
• pp.87-90
• /
• 1995

Biomechanical can physchological approaches have provided the optimum stair dimensions but physiological approach has never been used in assessing the common method of assessing the optimum stair dimension. Therefore, this study was conducted to investigate the validity of the physiological measure of heart rate in assessing the optimum stair dimensions. Sixteen subjects were asked to walk up three different stairs with their normal walking speed. The results showed that the physiological approach with the heart rate difference was found to be valid in assessing the optimum stair dimension. The optimum stair dimension from this study (riser length for 185 mm and tread length for 310 mm) was chosen because it was similar to optimum dimension by the psychological approach (Irvine et al., 1990).

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.43-54
• /
• 1992

The purpose of this study was to obtain the guides of establishing vertical dimension by analyzing the facial and oral landmarks of Korean adults. The following conclusions were obtained from this study. 1. The ratio of bizygomatic width to dental arch width was 3.26 : 1 in male and 3.21 : 1 in female, and the ratio of vertical dimension to dental arch length was 2.49 : 1 in male and 2.39 : 1 in female. 2. It was obtained by analysis of multiple regression that the corelative formula, vertical dimension$=23.37+0.24{\times}bizygomatic$ $width+0.29{\times}dental$ arch length. 3. There was no statistically significant difference between the results of vertical dimension acquired by means of Hayakawa's prediction($68.04{\pm}3.16mm$ in male, $64.38{\pm}3.00mm$ in female) and that of vertical dimension by this study.

• 건축역사연구
• /
• 제14권3호
• /
• pp.119-128
• /
• 2005

In ancient times, architectural design was seen as a critical task in building technologies. Specifically, form, dimension and structural design are of significant. These aspects are associated with each other and to be emerged as a whole. Designing plan dimension was deemed to be the core of design technology due to its close relationship with module system. Thus, its evolution as well as development process typically represents and reflects the spirits and contents of design technologies in ancient China. In China, the materials regarding ancient architectural technology include Yingzaofashi(營造法式) of Song Dynasty and Gongchengzuofazeli(工程做法則例) of Qing Dynasty. They show many aspects concerning materials, structure, scale system and building. In Yingzaofashi, although the length of objects are decided by 'cai(材)' and 'fen(分)', there are no regulations on length, width and height of a building. However, in the construction of ancient buildings, the above mentioned basic scales are very important in both design and construction. The present paper attempts to discuss the significance, namely, the design principles of length, with and height of ancient chinese architecture.

• 한국결정성장학회지
• /
• 제9권3호
• /
• pp.334-338
• /
• 1999

p형 단결정 규소 웨이퍼를 불화수소 용액속에서 전류밀도와 양극반응 시간을 변화시켜 다공질규소를 제작하고, 그 질량을 측정한 후 이 값으로부터 다공도와 쪽거리(fractal) 차원을 계산하였다. 그 결과 양극반응 시간이 일정한 경우 다공도는 전류밀도에 비례하였다. 그리고 전류밀도가 일정한 경우 여러 양극반응 시간의 데이터로부터 얻은 쪽거리 차원은 일정하였다. 또한 쪽거리 차원은 불화수소의 농도 증가에 따라 감소하였다. 이같은 실험결과를 퍼짐한계침전(diffusion limited depostion) 모형으로 계산된 2차원 컴퓨터 시늉내기(simulation) 결과와 비교 분석하였다. 시늉내기 결과 다공도는 퍼짐거리에 비례하였으며, 쪽거리 차원은 퍼짐거리와 반비례하였다. 이때 퍼짐거리는 전류밀도에 비례하고 불화수소의 농도에 반비례하는 물리량이므로 정성적으로 실험결과와 일치하였다. 그러나 쪽거리 차원이 증가함에 따라 다공도가 감소되는 결과는 실험결과와 상반되었다.

• 한국포장학회지
• /
• 제19권2호
• /
• pp.61-65
• /
• 2013

Modified atmosphere (MA) of reduced $O_2$ and elevated $CO_2$ concentrations has been used for keeping the quality of fresh produce and extending the shelf life. As a way to attain the beneficial MA package around the produce, a gas diffusion tube or perforation can be attached onto the container and controlled on real time in its opening/closing responding to $O_2$ and $CO_2$ concentrations measured by gas sensors. The timely-controlled opening of the gas diffusion tube can work in harmony with the produce respiration and help to create the desired MA. By use of the mathematical modeling, the effect of tube dimension on the controlled container atmosphere was figured out in this study. Spinach and king oyster mushroom were used as typical commodities for designing the model container system (0.35 and 0.9 kg in 13 L, respectively) because of their respiration characteristics and the optimal MA condition ($O_2$ 7~10%/$CO_2$ 5~10% for spinach; $O_2$ 2~5%/$CO_2$ 10~15% for mushroom). With a control logic for the gas composition to stay as close as possible to optimum MA window without invading injurious low $O_2$ and/or high $CO_2$ concentrations, the atmosphere of the sensor-controlled container could stay at its lower $O_2$ boundary or upper $CO_2$ limit under certain tube dimensional conditions. There were found to be the ranges of the tube diameter and length allowing the beneficial MA. The desired range of the tube dimension for spinach consisted of combinations of larger diameter and shorter length in the window of 0.3~2 cm diameter and 0.2~10 cm length. Similarly, that for king oyster mushroom was combinations of larger diameter and shorter length in the window of 0.9~2 cm diameter and 0.2~3 cm in length. Clear picture on generally affordable tube dimension range may be formulated by further study on a wide variety of commodity and pack conditions.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제7권1호
• /
• pp.7-18
• /
• 2000

Let M be an n-dimensional CR submanifold CR dimension n - l of a complex projective space M. We characterize M of $\bar{M}$ in terms of an estimations of the length of the derivative of Ricci tensor of the length of Ricci tensor.

• Imaging Science in Dentistry
• /
• 제50권4호
• /
• pp.319-322
• /
• 2020

Purpose: The purpose of this study was to investigate the utility of the width-to-length ratio for the differentiation of ameloblastomas and odontogenic keratocysts in the body of the mandible. Materials and Methods: This study retrospectively reviewed 9 patients with ameloblastomas and 9 patients with odontogenic keratocysts using cone-beam computed tomography. The width-to-length ratio was determined by measuring the ratio between the greatest buccolingual dimension and the greatest perpendicular anteroposterior dimension of the lesion on the axial view. One-way analysis of variance was used to examine the difference in the width-to-length ratio between the 2 types of lesions. Statistical significance was tested at P<0.05. Results: Ameloblastomas showed a mean width-to-length ratio of 0.64, whereas odontogenic keratocysts showed a mean width-to-length ratio of 0.41. The cut-off value with which the 2 types of lesions were differentiated was 0.5. The width-to-length ratios of ameloblastomas were significantly higher than those of odontogenic keratocysts (P<0.05). Conclusion: The width-to-length ratio might be used to differentiate between ameloblastomas and odontogenic keratocysts.

• 한국어류학회지
• /
• 제18권3호
• /
• pp.209-215
• /
• 2006

한국의 퉁가리과 어류 3종의 형태학적 특성을 classical dimension과 truss dimension을 사용하여 파악하였다. Arc sin square root 전환 후, 18가지의 계측형질을 체장에 대한 비율로, 그리고 3가지의 계측형질은 두장에 대한 비율로 각각 분석하였다. 퉁사리, Liobagrus obesus는 classical dimension과 truss dimension의 4가지 계측 형질이 퉁가리, L. andersoni와 자가사리, L. mediadiposalisa에 비하여 컸다 (P<0.05). 퉁사리와 퉁가리는 truss dimension의 3가지 계측형질이 자가사리보다 컸다 (P<0.05). 조사된 퉁가리과 어류의 6가지 계측형질에서는 유의적인 차이가 없었다. 본 연구에 사용된 dimension들은 한국산 퉁가리과 어류들을 구별할 수 있는 적절한 분류학적 지표로 사용될 수 있으리라 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.522-528
• /
• 1998

This paper presents a fundamental fractal characteristics of the growing crack that has an irregularity producing a zigzag crack contour. This irregularity is analysed by a fractal geometry in a box counting method that is a very simple technique. First the fractal dimensions and actual fractal extensive crack length are obtained. Also a fractal fracture energy relation with a fractal dimension is found so as to get fractal crack behaviors. Thus it can be shown that the fractal dimension has a possibility as a fracture parameter in a real crack growth length meaning.

• 복식문화연구
• /
• 제3권2호
• /
• pp.293-306
• /
• 1995

The purpose of this study is to analysis children's measurement and to provide the fundamental information for he clothing design which can reflect the characteristic of their bodies. An anthropometric database used for this study was the 1992 national anthropomatric survey of Koreans. The results obtained are as follows; (1) Children showed the significant difference of their growth in accordance with the increase of their ages. There were also the difference between body and girls. Height, length of items grew most promthy. For example; boys from 10 to 11 and girls from 10 to 11 again their height mostly. (2) In character of body proportion, significant difference were found in accordance with their ages and sex. However, in the items of height, length noticeable changes of proportion could not be found because there were hardly any actual difference of size means while girth items appeared differently. (3) There were significant factors from the result of factor analysis of body dimension. The fist factor ; grith, depth, breath. The second factor ; height, length. (4) We can class three groups with the results of cluster analysis of body dimension.