• 대한수학회지
• /
• 제57권6호
• /
• pp.1389-1406
• /
• 2020

Let Λ be an Artin algebra and mod Λ the category of finitely generated right Λ-modules. We prove that the radical layer length of Λ is an upper bound for the radical layer length of mod Λ. We give an upper bound for the extension dimension of mod Λ in terms of the injective dimension of a certain class of simple right Λ-modules and the radical layer length of DΛ.

• 복식문화연구
• /
• 제17권5호
• /
• pp.866-877
• /
• 2009

The purpose of this study was to develop the dimension of hand pattern-making for Korean glove. The glove pattern-making has difficult problem in combination of anthropometric and engineering aspects. In addition, existing dimension data are not enough for glove pattern-making. Therefore, to develop the dimension for glove this study comprehensive list of candidate hand data was reviewed and the manufacturers(career over the 15 years) were interviewed on the method of glove. The result of comparing between the structures in hand and existing glove pattern, there draw deduction from follows. Pattern-making for glove need size of hand length, thumb length, index finger length, middle finger length, ring finger length, hand circumference, thumb-ring finger circumference and maximum hand thickness.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.97-106
• /
• 1992

하천 수로망(水路網)의 수로길이와 본류(本流) 수로길이는 사용된 지형도(地形圖) 축척(縮尺)에 따라 각각 다른 값을 나타내며, 이와 같은 지형도상(地形圖上)의 수로길이는 Fractal로 간주할 수 있다. 수로망(水路網)의 하천길이와 본류(本流) 수로길이를 Horton 법칙을 적용함으로써 유역면적비(Ra)만의 함수로 나타내어, 수로망(水路網)의 하천길이에 관한 Fractal Dimension(D)와 본류(本流) 수로길이에 관한 Fractal Dimension(d)를 길이의 비(比)($R_L$)과 유역면적비(比)($R_a$)의 함수로 각각 유도하였다. 유도된 결과식을 금강수계내(錦江水系內) 산성(山城)유역의 수로망(水路網)에 적용하여 기(旣) 발표된 공식과 비교 검토하였으며, Fractal Dimension은 수로망(水路網)의 경우 지형도(地形圖) 축척(縮尺)이 클수록 2에 가까운 값을 나타낸 반면에, 본류(本流)수로의 경우는 1에 가까운 값을 나타내었다. 본 연구의 결과는 지형도(地形圖) 축척(縮尺)에 따르는 수로망(水路網)구성의 정량적(定量的) 분석에 도움이 되리라 생각된다.

• 한국수자원학회논문집
• /
• 제32권3호
• /
• pp.291-300
• /
• 1999

하천치수를 고려한 프랙탈 차원의 개념을 실제 강우-유출 모형에 적용시키는 방안으로써 스나이더 합성단위유량 도법을 택하였으며, 5대강 수계의 29개 유역에 대한 지형자료와 관측단위유량도 자료를 이용하여 4가지 형태의 스나이더형 관계식을 유도하였다. 29개 유역에 대한 분석과 2개 유역에 대한 검증 결과 하천길이의 프랙탈적인 성질을 이용하고 기계산된 자료는 기계산된 값을 이용하는 스나이더형 관계식이 가장 좋은 결과를 보여주었다. 하천차수 유역중심에서 출구까지의 하천길이( Lca )중 Lca 는 프랙탈적인 성질이 없고 유역중심의 상류에 해당하는 주하천 구간인 ( Lma - Lca )만이 1.027의 프랙탈 차원을 갖는다는 가정을 하였으며, 이를 이용하여 우리날 수계를 대표 할 수 있으며 작업대상 지형도축척에 의해 발생하는 하천길이의 프랙탈적인 영향을 고려할 수 있는 새로운 스나이더형 공식을 제안하였다.

• 한국수자원학회논문집
• /
• 제31권5호
• /
• pp.587-597
• /
• 1998

기존의 연구자들은 하천길이의 프랙탈 차원은 유역내 전체 하천에 대해 균일하며 그 수치도 1.09~1.13로 상당히 크게 보았다. 그렇지만 국제수문개발계획의 대표유역중 하나인 평창강수계내 이목정 소유역을 대상으로 1/50,000, 1/25,000, 1/5,000의 3개 축척 지형도를 이용하여 프랙탈 차원을 산정한 결과 하천차수별로 서로 다른 프랙탈 차원을 갖는 것을 발견하였고, 또한 전체 하천으로 보아도 기존 연구자들이 제안한 수치보다 작은 수치를 보였다. 이목적 소유역내 하천의 프랙탈 차원을 산정한 결과에 의하면 기존의 국내외의 연구가 전체 하천을 균일한 프랙탈 차원을 갖는 것으로 보는 것과 달리 1차, 2차 하천은 1.033, 이보다 하천차주가 높은 3차, 4차 하천을 1.014의 값을 보이는 등 하천차수별로 프랙탈 차원이 다르게 산정되었다. 또한 전체적인 하천길이에 대한 프랙탈 차원도 1.027로서 국내외에서 제시된 기존의 하천길이에 대한 프랙탈 차원인 1.09~1.13 사이의 수치는 실제보다 너무 과대평가된 것으로 추정된다.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.915-923
• /
• 2002

Recently, GIS(Geographic Information System) is used to extract various hydrological factors from DEM(Digital Elevation Model) in river basin. Therefore, this study aims at the determination of river fractal dimension using DEM. In this paper, the main-stream length in river basin was grid-analyzed for each scale(1/5,000, 1/25,000, 1/50,000) and each cell size(5m$\times$5m, l0m$\times$l0m, 20m$\times$20m, 30m$\times$30m, 40m$\times$40m, 50m$\times$50m, 60m$\times$60m, 70m$\times$70m, 80m$\times$80m, 90m$\times$90m, 100m$\times$l00m, 120m$\times$120m, 150m$\times$150m) using GIS. Also, fractal dimension was derived by analyzing correlation among main-stream lengths, scale, and cell size which were calculated here. The result of calculating fractal dimension for each cell size shows that the fractal dimension on the main-stream length is 1.028.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.800-808
• /
• 1997

Decision process for length dimension in the mechanical system design process has been studied with a washing machine transmission as a model. The results are, (i) the length dimensions of the non-shaft elements are independent of other elements, (ii) the length dimensions of the shaft elements are dependent on the dimensions of the non-shaft elements located inside and outside of that elements, (iii) the length dimensions of the inner shaft elements are dependent on those of the outer shaft elements located parallel, (iv) the length dimensions of the shaft elements located serial are independent of each other.

• 복식
• /
• 제54권4호
• /
• pp.113-127
• /
• 2004

This study examined the trend of pattern which appeared throughout men's clothing fashion magazine from 1999 to 2002 and the influence which the demographic characteristic have on the sensibility dimension of pattern and the preference degree of kinds of pattern. The results of study were as follows. 1) The pattern which was used most frequently on recent men's clothing was a length stripe, and the representation technique which was used most frequently on recent men's clothing was the technique of a geometric expression. 2) The pattern which men and women preferred most out of ten kinds of patterns-length stripe, width stripe, oblique stripe, check, square, waterdrop, paisley, flower of style shape, flower of realistic shape, flower of shape-was a length stripe. 3) The sensibility dimension of pattern image was composed of fascination, dignity, daring, gentleness, and reality. 4) Because sensitivity dimension and kinds of pattern were significant according to the distinction of sex, vocation, academic career, income, this study can conclude the demographic characteristic have an influence on sensitivity dimension and kinds of pattern.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.591-599
• /
• 2016

This study analyzes the somatotype of tall stature Korean women's lower body for proper slack patterns. The study subjects consist of 350 statures over 165cm in 18-59 aged women's of Size Korea 2010. Descriptive statistics, factor analysis, cluster analysis, ANOVA, Duncan test were used for analysis using SPSS 19.0. The result are as follows: Factor 1 was the horizontal dimension of waist and hip, factor 2 was the vertical dimension of lower body, factor 3 was the horizontal dimension of the lower limbs, factor 4 was the crotch length, and factor 5 was the horizontal dimension of hip. The lower body was divided into 3 types based on analysis of the above factors. Type 1 (46.6%) represented stout type with a thick and medium length of crotch and leg. Type 2 (22.7%) represented a curve type from waist to hip with long crotch length, while short and thin leg. Type 3 (30.7%) was referred as slender type, with short crotch length, while long and thin leg.

• Journal of Preventive Medicine and Public Health
• /
• 제31권3호
• /
• pp.440-448
• /
• 1998

In many developed countries, for example, USA, respirator fit testing is required before entering specific work environment to ensure that the respirator worn satisfies a minimum of fit and that the user knows when the respirator fits properly. Unfortunately because we have not fit test regulation in Korea, a lot of workers wearing respirators may be potentially exposed to hazards. This study was conducted to evaluate the fitting performance for respirators and correlation fit factors with facial dimensions of wearers. 110 subjects (70 males, 40 females) were fit tested for three quarter masks, i.e., two domestic-made Mask 2, and Y and one foreign-made Mask T using PortaCount 8020. A facial dimension survey of the same subjects was conducted to develop a facial dimension grids fer correlation fit factors with facial dimension parameters. A facial dimension grid was developed on the basis of face length and lip length for quarter masks. The results obtained were as follows : 1 Fit factors of Mask T were much higher than those of Masks Z, and Y. 2. Males were fitted more properly than females. 3. Male in box 'f' of grid would be adequately fitted Mask Y and male in box 'b', 'e', 'f', 'h' of grid would be sufficiently fitted Mask T. Female in box 'h' of grid may have a good fitting performance for both Mask Y, and T. But subjects in all boxes of grid would be inadequately fitted Mask Z.