• The Journal of the Society of Stroke on Korean Medicine
• /
• v.6 no.1
• /
• pp.9-16
• /
• 2005

Objective : The heart rate variability is very useful indicator to study the function of the autonomic nervous system(ANS), and the physiologic signals can be observed based on the changes of the ANS of the heart. In order to assay the effects of the laser exposing to healthy subjects, the double blind test has been performed. Methods : This study included 62 healthy adults who have not any ANS disease and had normal sinus rhythm in electrocardiogram. The control group consisted of 31 subjects, laser group consisted of 31 subject. HRV was measured for 5 minutes before laser irradiation, sham and real laser irradiated for 30 minutes and than HRV remeasured for 5 minutes. Statistical significance was evaluated by independent T-test. Results : Mean HRV, Ln(VLF), Ln(HF), Ln(TP) of both groups at post-laser period decreased compared with that of the pre-laser period. Ln(LF) of both groups at post-laser period increased compared with that of the pre-laser period. LF/HF, SDNN of real laser group decreased and sham group decreased. Conclusions : There is no difference between two groups. The reason is presumed that all the studied subjects are healthy adults, and also the short and single transcutaneous laser irradiation would not influence upon changes of the ANS. The further study must be followed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.155-163
• /
• 2018

One of the major disadvantages of isogeometric analysis(IGA) is that local refinement is nearly impossible in a conventional manner because of the tensor product nature in NURBS. In this research, we investigate a local refinement scheme for isogeometric analysis, named multi-resolution approach where different resolutions are employed at each subdomain, using h-refinement relation to endow displacement compatibility on an interface of subdomains. Then, we develop shape sensitivity analysis possessing same compatibility condition as in the analysis. Numerical examples are shown to demonstrate the computational efficiency of the method in analysis especially stress concentration problem and accurate sensitivity results which is also compatible on the interface.

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.109-120
• /
• 2018

Sidestream in domestic wastewater treatment plants contains high concentration of ammonium, which increases nitrogen loading rate in the mainstream. The process for deammonification consisting of partial nitritation-anaerobic ammonium oxidation (ANAMMOX) and heterotrophic denitrification is an economical method of solving this problem. Currently, about 130 full-scale deammonification plants are fully operating around the world, but none is in Korea. In order to transfer the principal information about sidestream deammonification processes to researchers and operators, we summarized basic concepts, processes type, and key influence factors (e.g., concentration of nitrogen compounds, dissolved oxygen (DO), temperature, and pH). This review emphasis on the processes of single-stage sequencing batch reactor (SBR) deammonification, which are widely used as full-scale plants. Since simultaneous processes of partial nitritation, ANAMMOX and heterotrophic denitrification occur in a single reactor, the single-stage SBR deammonification requires appropriate control/monitoring strategies for several operating factors (DO and pH mostly) to achieve efficient and stable operation. In future, AB-process consisting of A-stage (energy harvesting from organics) and B-stage (ammonium removal without organics) will be applied to the wastewater treatment process. Thus, we suggest mainstream deammonification for B-stage connected with the sidestream deammonification as seeding source of ANAMMOX. We expect that many researchers will become more interested in the sidestream deammonification.

• Science of Emotion and Sensibility
• /
• v.17 no.4
• /
• pp.19-28
• /
• 2014

The number of people using on-line shopping has rapidly increased over time. In particular, open-market is the most potential on-line market. Since there are too many products in open-market, customers have serious troubles finding products they want. Thus, interface should be improved so that open-market is able to offer products they want effectively. This study analyzed web interface based on main web pages of four major open-market companies in Korea, and performed satisfaction evaluation according to the analyzed factors. As a result, it reveals that what kind of factors the customers prefer and there is a causal relation between the most satisfactory open-market and the preferred factors of the customers.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.608-613
• /
• 2010

Electricity generation of microbial fuel cells (MFC) is greatly affected by the kind of feed substrates because substrates would change microbial community of electrochemically active bacteria (EAB) able to transfer electrons to electrode. The effect of different substrates on electricity generation and microbial community of MFC was investigated. Two-chamber MFCs fed with acetate (A-MFC), butyrate (B-MFC), propionate (P-MFC), glucose (G-MFC) and a mixture (M-MFC) of the 4 substrates (acetate : butyrate : propionate : glucose = 1 : 1 : 1 : 1 as $COD_{Cr}$ base) were operated under continuous mode. The maximum power density was found from the M-MFC ($190W/m^3$) which showed the lowest internal resistance ($89{\Omega}$). The maximum power densities of the pure substrates feed MFCs were in order of A-MFC ($25W/m^3$), P-MFC ($21W/m^3$), B-MFC ($20W/m^3$) and G-MFC ($9W/m^3$). In DGGE analysis, the microbial community structure in suspension was quite different from each others depending on feed substrates, while the community structure in the biofilm was relatively similar regardless of the substrates. This result suggests that the feed substrates would affect the microbial community of suspended growth bacteria than attached growth bacteria resulting in difference of electricity generation in MFCs.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.589-593
• /
• 2016

Microbial fuel cell (MFC) can produce electricity from oxidation-reduction of organic and inorganic matters by electrochemically active bacteria as catalyst. Stacked MFCs have been investigated for overcoming low electricity generation of single MFC. In this study, two-typed stacked-MFCs (submerged-flat and stand-falt) were operated according to electrode connection for optimal stacked technology of MFC. In case of submerged-flat MFC with all separator electrode assembly (SEA) sharing anode chamber, MFC with mixed-connection showed more voltage loss than MFC with single-connection method. And MFC stacked in parallel showed better voltage production than MFC stacked in series. In case of stand-flat MFC, voltage loss was bigger when SEAs sharing anodic chamber only were connected in series. Voltage loss was decreased when SEAs parallel connected SEAs sharing anodic chamber were connected in series.

• Journal of KIISE
• /
• v.44 no.4
• /
• pp.374-382
• /
• 2017

As the walking exercise is emphasized in personalized healthcare, numerous services demand walking information. Along with the propagation of smartphones nowadays, many step-counter applications have been released. But these applications are error-prone to abnormal movements such as simple shaking or vibrations; also, different step counts are shown when the phone is positioned in different locations of the body. In this paper, the proposed method accurately counts the steps regardless of the smartphone position by using an accelerometer and a proximity sensor. A threshold is set on each of the six positions to minimize the error of undetection and over-detection, and the cut-off section is set to eliminate any noise. The test results show that the six position type were successfully identified, and through a comparison experiment with the existing application, the proposed technique was verified as superior in terms of accuracy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.85-94
• /
• 2014

Tolerance accumulation has serious effect on the performance of an assembled body. This paper proposes the method which analyzes tolerance accumulation using Monte Carlo Simulation. This method can predict tolerance distribution of fully assembled body using the dimensional tolerance distribution of each part to be assembled. In this analysis, it is assumed that the tolerance of each part has the nominal distribution or uniform distribution. This analysis method is applied to ECV(External Control Valve), and the accumulated tolerance of the fully assembled ECV is obtained from the analysis. The results show that initial tolerance given to each part do not meet the design requirement of ECV. Hence, the tolerances of each part are modified and the additional analysis with the modified tolerances yields the results which satisfy the design requirements of ECV.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.29-35
• /
• 2004

Hafnium-oxide gate dielectric films deposited by a metal organic chemical vapor deposition technique on a $N_2-plasma$ treated SiNx and a hydrogen-terminated Si substrate have been investigated. In the case of $HfO_2$ film deposited on a hydrogen-terminated Si substrate, suppressed crystallization with effective carbon impurity reduction was obtained at $450^{\circ}C$. X-ray photoelectron spectroscopy indicated that the interface layer was Hf-silicate rather than phase separated Hf-silicide and silicon oxide structure. Capacitance-voltage measurements show equivalent oxide thickness of about 2.6nm for a 5.0 nm $HfO_2/Si$ single layer capacitor and of about 2.7 nm for a 5.7 nm $HfO_2/SiNx/Si$ stack capacitor. TEM shows that the interface of the stack capacitor is stable up to $900^{\circ}C$ for 30 sec.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.128-134
• /
• 2018

In this paper, two ports feeding a microstrip patch antenna using a quadrature hybrid circuit was proposed to enhance the bandwidth for the global positioning system(GPS). The square patch was designed, and the probe feeding was applied. The quadrature hybrid chip circuit for two-port feeding was designed, and output ports that have a 90-degree phase difference feed to the patch antenna. The designed patch and quadrature hybrid circuit were implemented on an FR4 board, and were combined. The measurement of the bandwidth within a voltage standing wave ratio(VSWR) of 2:1 and axial ratio(AR) in 3dB were wide band as 29% BW (1,230~1,700 MHz) and 15.87% BW (1,400~1,650 MHz), respectively. Antenna gain were measured 2.75dBi at the center frequency.