• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1501-1506
• /
• 2018

Edible insects have recently been increasingly promoted as a source of protein. As the number of farms rearing these insect increases, it is important to develop safe and nutritious feed sources to improve their commercial quality. The aim of the current study was to determine the effect of food by-products as feed supplements for the Korean rhinoceros beetle, Allomyrina dichotoma, which has been registered as a general food ingredient in Korea. We compared the effects of waste citrus peel, soybean curd cake, soybean oil meal, and brewers' dried grain on the growth of third instar larvae of A. dichotoma. Groups of larvae were fed with fermented sawdust and nine different combinations of the above by-products and the effects on their growth were measured until pupation. The highest survival rate was with feed supplemented with 10% brewers' dried grain (66.7%, p<0.05), and these larvae were also 26% heavier (p<0.05) than the control group that received no supplementation. In the 10% brewers' dried grain group, the larval period of third instar was shortened by almost 28 days (p<0.01) compared to the control group. Of all the groups, only that which was fed the brewers' dried grain supplement showed more than a 90% pupation rate (p<0.05). Therefore, brewers' dried grain may be useful as a source of feed for A. dichotoma.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1055-1061
• /
• 2019

Sarracenia purpurea as a carnivorous plant in the family Sarraceniaceae is known to require strong light for its growth and to absorb nutrients from the decomposed molecules of insects that are attracted by color, sweet juice, and the like. S. purpurea grew greenish in whole body under weak light conditions, while the whole of the insectivorous sac including leaves, is changed to dark red under strong light conditions. The phenomenon of reddish S. purpurea is thought to be related to the flavonoid pigment anthocyanin. Interestingly, the color change was not observed when S. purpurea was grown in a growth condition with abundant nitrogen fertilizer. The expression levels of anthocyanin contents and biosynthesis-related genes were strongly correlated with light intensity and nitrogen fertilizer. The anthocyanin content in the strong light condition ($240{\mu}mol\;m^{-2}s^{-1}$) was 6.15 times higher than that in the weak light ($40{\mu}mol\;m^{-2}s^{-1}$). In contrast, the anthocyanin contents were not significantly changed when 0.8% urea solution was supplied as nitrogen fertilizer. Consistently, CHALCONE SYNTHASE (CHS) gene was up-regulated by strong light and down-regulated by nitrogen fertilizer. These results suggest that the environmental changes of light and nitrogen in soil regulate the anthocyanin content in S. purpurea.

• Composites Research
• /
• v.31 no.6
• /
• pp.332-339
• /
• 2018

Fiber metal hybrid laminate (FML) can be used as an economic material with superior mechanical properties and light weight than conventional metal by bonding of metal and FRP. However, there are disadvantages that it is difficult to predict fracture behavior because of the large difference in properties depending on the type of fiber and lamination conditions. In this paper, we study the failure behavior of hybrid materials with laminated glass fiber reinforced plastics (GFRP, GEP118, woven type) in Al6061-T6 alloy. The Al alloys were coated with GFRP 1, 3, and 5 layers, and fracture behavior was analyzed by using a static test and a low cycle fatigue test. In the low cycle fatigue test, strain - life analysis and the total strain energy density method were used to analyze and predict the fatigue life. The Al alloy did not have tensile properties strengthening effect due to the GFRP coating. The fatigue hysteresis geometry followed the behavior of the Al alloy, the base material, regardless of the GFRP coating and number of coatings. As a result of the low cycle fatigue test, the fatigue strength was increased by the coating of GFRP, but it did not increase proportionally with the number of GFRP layers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.83-90
• /
• 2019

In this paper, Mg-doped AlN epilayers for power semiconductor devices are grown by mixed-source hydride vapor phase epitaxy. Magnesium is used as p-type dopant material in the grown AlN epilayer. The AlN epilayers on the GaN-templated sapphire substrate and GaN-templated-patterned sapphire substrate (PSS), respectively, as the base substrates for device application, were selectively grown. The surface and the crystal structures of the AlN epilayers were investigated by field emission scanning electron microscopy (FE-SEM) and high-resolution-X-ray diffraction (HR-XRD). From the X-ray photoelectron spectroscopy (XPS) and Raman spectra results, the p-type AlN epilayers grown by using the mixed-source HVPE method could be applied to power devices.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.270-285
• /
• 2018

The behavior of wave-induced pore water pressure inside the rubble mound and seabed, and the resultant structure failure are investigated, which are used in design of the composite breakwater representing the coastal and harbor structures. Numerical simulation techniques have been widely used to assess these behaviors through linear and nonlinear methods in many researches. While the combination of strongly nonlinear analytical method and turbulence model have not been applied yet, which can simulate these characteristics more accurately. In this study, olaFlow model considering the wave-breaking and turbulent phenomena is applied through VOF and LES methods, which gives more exact solution by using the multiphase flow analytical method. The verification of olaFlow model is demonstrated by comparing the experimental and numerical results for the interactions of regular waves-seabed and regular waves-composite breakwater-seabed. The characteristics of the spatial distributions of horizontal wave pressure, excess-pore-water pressure, mean flow velocity and mean vorticity on the upright caisson, and inside the rubble mound and seabed are discussed, as well as the relation between the mean distribution of vorticity size and mean turbulent kinetic energy. And the stability of composite breakwater are also discussed.

• Yonsei Medical Journal
• /
• v.59 no.9
• /
• pp.1088-1095
• /
• 2018

Purpose: Post-operative pulmonary function is an important prognostic factor for lung transplantation. The purpose of this study was to identify factors affecting recovery of forced expiratory volume in 1 second (FEV1) at the first year after lung transplantation. Materials and Methods: We retrospectively reviewed the medical records of lung transplantation patients between October 2012 and June 2016. Patients who survived for longer than one year and who underwent pulmonary function test at the first year of lung transplantation were enrolled. Patients were divided into two groups according to whether they recovered to a normal range of FEV1 (FEV1 ${\geq}80%$ of predicted value vs. <80%). We compared the two groups and analyzed factors associated with lung function recovery. Results: Fifty-eight patients were enrolled in this study: 28 patients (48%) recovered to a FEV1 ${\geq}80%$ of the predicted value, whereas 30 patients (52%) did not. Younger recipients [odds ratio (OR), 0.92; 95% confidence interval (CI), 0.87-0.98; p=0.010], longer duration of mechanical ventilator use after surgery (OR, 1.14; 95% CI, 1.03-1.26; p=0.015), and high-grade primary graft dysfunction (OR, 8.08; 95% CI, 1.67-39.18; p=0.009) were identified as independent risk factors associated with a lack of full recovery of lung function at 1 year after lung transplantation. Conclusion: Immediate postoperative status may be associated with recovery of lung function after lung transplantation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.203-216
• /
• 2021

Analyzing various wave interactions with oscillating wave surge converters (OWSC) is essential because they must be operated efficiently under a wide range of wave conditions and designed to extract optimal wave energy. In the conceptual design and development stage of OWSC, numerical analysis can be a good alternative as a design tool. This study performed a numerical analysis on the behavioral characteristics of the inverted triangle flap against the incident waves using open source CFD to examine the essential behavioral attributes of OWSC. Specifically, the behavioral characteristics of the structure were studied by calculating the free water surface displacement and the flap rotation angle near the inverted triangular flap according to the change of the period under the regular wave conditions. By comparing and examining the numerical analysis results with the hydraulic model experiments, the validity of the analysis performed and the applicability in analyzing the wave-structure interactions related to OWSC was verified. The numerical analysis result confirmed that the hydrodynamic behavior characteristic due to the interactions of the wave and the inverted triangle flap was well reproduced.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.93-100
• /
• 2021

Since the IB (Immersed Boundary) method, which can perform coupling analysis with objects and fluids having an impermeable boundary of arbitrary shape on a fixed grid system, has been developed, the IB method in various CFD models is increasing. The representative IB methods are the directing-forcing method and the ghost cell method. The directing-forcing type method numerically satisfies the boundary condition from the fluid force calculated at the boundary surface of the structure, and the ghost-cell type method is a computational method that satisfies the boundary condition through interpolation by placing a virtual cell inside the obstacle. These IB methods have a disadvantage in that the computational algorithm is complex. In this study, the simplified immersed boundary (SIB) method enables the analysis of temporary structures on a fixed grid system and is easy to expand to three proposed dimensions. The SIB method proposed in this study is based on a one-field model for immiscible two-phase fluid that assumes that the density function of each phase moves with the center of local mass. In addition, the volume-weighted average method using the density function of the solid was applied to handle moving solid structures, and the CIP method was applied to the advection calculation to prevent numerical diffusion. To examine the analysis performance of the proposed SIB method, a numerical simulation was performed on an object falling to the free water surface. The numerical analysis result reproduced the object falling to the free water surface well.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.384-395
• /
• 2020

Breaking waves generated by wave shoaling in coastal areas have a close relationship with various physical phenomena in coastal regions, such as sediment transport, longshore currents, and shock wave pressure. Therefore, it is crucial to accurately predict breaker index such as breaking wave height and breaking depth, when designing coastal structures. Numerous scientific efforts have been made in the past by many researchers to identify and predict the breaking phenomenon. Representative studies on wave breaking provide many empirical formulas for the prediction of breaking index, mainly through hydraulic model experiments. However, the existing empirical formulas for breaking index determine the coefficients of the assumed equation through statistical analysis of data under the assumption of a specific equation. In this paper, we applied a representative linear-based supervised machine learning algorithms that show high predictive performance in various research fields related to regression or classification problems. Based on the used machine learning methods, a model for prediction of the breaking index is developed from previously published experimental data on the breaking wave, and a new linear equation for prediction of breaker index is presented from the trained model. The newly proposed breaker index formula showed similar predictive performance compared to the existing empirical formula, although it was a simple linear equation.

• Journal of Environmental Health Sciences
• /
• v.46 no.6
• /
• pp.719-725
• /
• 2020

Objectives: With the growth of national interest in fine particulate matter, many complaints about pollutants emitted from air pollution emitting facilities have arisen in recent years. In particular, it is thought that a large volume of particulate pollutants are discharged from workplaces that use Solid Refuse Fuel (SRF). Therefore, particulate contaminants generated from SRF were measured and analyzed in this study in terms of respective particle sizes. Methods: In this study, particulate matter in exhaust gas was measured by applying US EPA method 201a using a cyclone. This method measures Filterable Particulate Matter (FPM), and does not consider the Condensable Particulate Matter (CPM) that forms particles in the atmosphere after being discharged as a gas in the exhaust gas. Results: The mass concentration of Total Suspended Particles (TSP) in the four SRF-using facilities was 1.16 to 11.21 mg/Sm3, indicating a very large concentration deviation of about 10 times. When the fuel input method was the continuous injection type, particulate matter larger than 10 ㎛ diameter showed the highest particle size fraction, followed by particulate matter smaller than 10 ㎛ and larger than 2.5 ㎛, and particulate matter of 2.5 ㎛ or less. Contrary to the continuous injection type, the batch injection type had the smallest particle size fraction of particulate matter larger than 10 ㎛. The overall particulate matter decreased as the operating load factor decreased from 100% to 60% at the batch input type D plant. In addition, as incomplete combustion significantly decreased, the particle size fraction also changed significantly. Both TSP and heavy metals (six items) satisfied the emissions standards. The measured value of the emission factor was 38-99% smaller than the existing emissions factor. Conclusions: In the batch injection facility, the particulate matter decreased as the operating load factor decreased, as did the particle size fraction of the particulate matter. These results will help the selection of effective methods such as reducing the operating load factor instead of adjusting the operating time during emergency reduction measures.