• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.213-219
• /
• 2005

In this study, we try to Quantitatively assess the micropollutants in Gwangyang bay, Gamag bay and Yeoa bay, using simultaneous analytical method fir 310 chemicals. In the results, several dozen organic pollutants were detected in sampling sites, and the major chemicals detected were CH type chemicals, such as aliphatic and polycyclic compounds, and CHN(O) type chemicals, such as aromatic ammines and nitro compounds. The concentration of organic pollutants was higher in summer than in winter. However, there was no association of species of organic pollutants with season. The total concentration of pesticides at each sampling site was measured within the range of $ND{\sim}9.11{\mu}g/L$. Insecticides and fungicides of pesticide type were detected in Gwangyang bay and Gamag bay, while six kinds of endocrine disrupter were detected in southern coastal waters. From the results of this study, we should estimated that the insecticides, the fungicides, and a few of the endocrine disrupters are major pollutant factors in southern coastal waters.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.509-513
• /
• 2002

In this study, instrumental neutron activation analysis was used to assess the concentration level of inorganic trace elements in Korean women blood serum. It was found out that high concentration of Na and Cl incurs analytical interference, but 12 elements of Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se, Zn can be determined under the condition of interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for analytical quality control. The average values of Na and Cl determined in serum samples are around 3000 mg/L, Ca is 100 mg/L and K is 200 mg/L. Besides, Br, Se and Zn have concentration level of 6.0, 0.1 and 1.0 mg/L, respectively. It was found that there is no significant difference between the present values and reported values.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.308-314
• /
• 2004

When the polymer was used for the guard raw materials of electronic device, the content of U, Th and their daughter nuclides were known as a factor of soft error. Because emitted alpha ray could be caused of mis-operation. And ionic impurities such as Cl, Fe, Na could shorten the device life-time. For the analysis of trace impurities in the polymer, neutron activation analysis(NAA) and ICP/AES have been studied. To improve the accuracy and sensitivity of the trace and ultratrace metallic impurities in the epoxy and phenol polymer, sample pretreatment method and optimum analytical condition of NAA were developed. Using the above method, U, Th and other 23 trace impurity elements were analyzed.

• Journal of Animal Science and Technology
• /
• v.52 no.6
• /
• pp.451-457
• /
• 2010

The porcine MHC (Major Histocompatibility Complex), encoding the SLA (Swine Leukocyte Antigen) genes, is one of the most significant regions associated with immune rejection in relation to transplantation. In this study, three SLA class I (SLA-1, SLA-3, SLA-2) loci and three SLA class II (DRB1, DQB1, DQA) loci were investigated in the previously unidentified Korean native pig (KNP) population that was closely inbred in the Livestock Technology Research Station in Cheongyang, Korea. Total thirteen KNPs from four generations were genotyped for the SLA alleles and haplotypes were investigated using PCR-SSP (Sequence-Specific Primer) method. The results showed that all of these KNPs had Lr-56.30/56.30 homozygous haplotype, indicating high level of inbreeding in the SLA genes. The inbreeding status of these animals was also investigated using microsatellite (MS) markers. From the 50 MS markers investigated, 17 MS markers were fixed in all generations and the fixed alleles are increased as 26 loci for the fourth generation. Two MS markers, S0069 and SW173, were heterozygous for all the animals tested. Observed and expected heterozygosities were calculated and the average inbreeding coefficients for each generation were also calculated. In the fourth generation, the average inbreeding coefficients was 0.732 and this may increase with further inbreeding process. Analysis of the SLA haplotypes and MS alleles can give important information for breeding the pigs for xenotransplantation studies.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.69-72
• /
• 2003

This paper presents a signal processing IC for digital HDTV, which is designed to operate in bunt-in HDW or in HD-set-top Box. The chip supports de-multiplexing an ISO/IEC 13818-1 MPEG-2 TS stream. It decodes MPEG-2 MP@HL video bitstream, and provides high-quality scaled video for display on HDTV monitor. The chip consists of ARM7TDMI for TS-Demux, PCI interface, Audio interface, MPEG2 MP@HL video decoder Display processor, Graphic processor, Memory controller, Audio int3face, Smart Card interface and UART. It is fabricated using Sam sung's 0.18-um and the package of 492-pin BGA is used.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.47-56
• /
• 2005

This paper presents a performance improvement result with the aid of closed feedback controller loop to a micro gyroscope. The dynamic model of a micro gyroscope is derived and a conventional proportional and derivative controller is designed via frequency domain analysis. The proposed control loop is implemented using several analog devices and applied to the SNU-Bosch MEMS gyroscope to check its performance improvement in real environment. The experiments demonstrated the performance improvement with the proposed feedback control loop. The bandwidth, linearity, and bias stability are improved to 78 Hz, 0.504 %, and 0.043 deg/sec, respectively, from 35 Hz, 2.07 %, and 0.066 deg/sec of open loop system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5769-5777
• /
• 2015

According to the forming or bending deformation in the press die, the thin plate occurs a work-hardening, the sheet hardening and cam unit's deformation causes incomplete forming during the cam molding process by the reacting spring forces. This study treated the input parameters of the stress and strain as given properties and also used Cam forming pressure considering the sheet hardening in the forming process of the aluminum sheet. The Hyperstudy are operated be linked with the Abaqus of the finite element analysis tool and the shape of Cam were carried out with non-linear shape optimization analysis. As a result removing the deformation of plate, the cam shape were optimized under conditions reduced deformation, having a minimum stress range and the minimum deformation. Therefore, a stress-strain curve and a normal distribution of stress-thickness can be obtained and optimization could be obtained for the shape of the stress and strain on the die plate hardened cam considering the thickness and reaction force of gas spring as iteration process.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.861-868
• /
• 2010

As CAS, X-ATK, and INT models considered as the most typical Air-to-Ground operation models in ROKAF are mainly designed as the voice-centered system between aircraft and ground control facilities, it is critical to newly develop the Link-16 based model for the ROK-US combined operation between F-15K, AWACS, M-SAM, and KDX-III equipped with Link-16. Former studies had been limited to the CAS operation, and they had mainly focused on reducing the voice transmission time to exchange the information between each mission step with maintaining existing operation steps. Therefore, this paper makes up the weak point in former studies, thereby designing new Air-to-Ground operation model for CAS, X-ATK, INT mission using Enterprise Architecture OV6c, which enables both aircraft and ground control facilities or between aircraft to obtain the real-time information on the location, identification, armament and the real-time image data through the broadcasting function. Based on the analysis of new operation model, we come to a conclusion that by simultaneously exchanging the information on mission between nodes concerned through the broadcasting function of Link-16. It is possible to cut down superfluous steps among the mission steps, and to reduce the mission time. It is clear that it gives rise to improve the battle efficiency and the decision-making tempo as well as the battlefield situational awareness.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.745-753
• /
• 2019

Recently, with the development of long-range / high-altitude guided weapon system for defense against ballistic missile, test range and firing altitude for guided weapons are increasing. Due to the increase in the test range and the intercepting altitude, it is expected to increase the range of safety area required for the firing test. Comparing to the foreign countries which have many desert or non-residence, in the domestic circumstances where the population is concentrated and distributed, it is more important to predict the falling area and to set the safety area for safely carry out the long-range / high-altitude intercept test. In this paper, we consider the following three points. The first is the booster fall trajectory modeling, the second is the shroud fall trajectory modeling, and finally, the debris dispersion modeling for the missile intercept. Especially, the AUTODYN model was used to predict debris falling area which produced in the high-speed guided missile intercepting test.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.6
• /
• pp.448-459
• /
• 2004

Interoperability is an important requirement of portable storage devices that are used to exchange and share data among diverse hosts. However, the required interoperability cannot be provided if different host systems use different file systems. To address this problem, we propose a new type of storage device called FSOC(File System On a Chip) that contains the file system within the storage device. In this paper, we give an example of the design and implementation of a flash memory-based FSOC and propose the performance models of the conventional storage device and the FSOC. We also analyze the performance characteristics of the conventional storage device and the FSOC based on the proposed performance models, and provide several experimental results using real applications that validate the performance models.